FCC ID Q87-WAP54GP
Wireless-G Access Point with POE
by LINKSYS LLC
Grantee Code: Q87 Product Code: WAP54GP
Latest application date: 2006-12-19
FCC ID Device Details
| FCC ID | Q87-WAP54GP |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | Q87 |
| Product Code | WAP54GP |
| Applicant Business | LINKSYS LLC 🇺🇸 |
| Related Domains |  belkin.com  adt.com.tw |
| Equipment Class | Wireless-G Access Point with POE |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-12-19 |
| 2412-2462 MHz | Original Equipment | 2005-05-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual 1 | Users Manual | 2005-05-04 | PDF 2.2 MB |
| Users Manual 2 | Users Manual | 2005-05-04 | PDF 2.3 MB |
| Users Manual 3 | Users Manual | 2005-05-04 | PDF 2.5 MB |
| Users Manual 4 | Users Manual | 2005-05-04 | PDF 662.9 KB |
| Internal Photos | Internal Photos | 2006-12-19 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2005-05-04 | PDF 1.4 MB |
| External Photos | External Photos | 2006-12-19 | PDF 654.6 KB |
| External Photos | External Photos | 2005-05-04 | PDF 257.8 KB |
| ID Label 1 | ID Label/Location Info | 2005-05-04 | PDF 62.1 KB |
| ID Label 2 | ID Label/Location Info | 2005-05-04 | PDF 92.9 KB |
| Operational Description | Operational Description | 2005-05-04 | PDF 50.7 KB |
| Test Setup Photos | Test Setup Photos | 2006-12-19 | PDF 444.4 KB |
| Test Setup Photos | Test Setup Photos | 2005-05-04 | PDF 1.2 MB |
| Test Report | Test Report | 2006-12-19 | PDF 368.1 KB |
| Test Report | Test Report | 2005-05-04 | PDF 3.3 MB |
| Description of Change | Cover Letter(s) | 2006-12-19 | PDF 57.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2005-05-04 | PDF 43.4 KB |
| POA | Cover Letter(s) | 2005-05-04 | PDF 38.5 KB |
| RF Exposure Info | RF Exposure Info | 2005-05-04 | PDF 96.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 50 KB | |
| Schematics Metadata only | Schematics | PDF 274.5 KB |
Application Information
| Application ID | Zp0O7OKRZRajldrPOxictA== |
|---|---|
| Final Action Date | 2006-12-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009100470 |
| Model | WAP54GP |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless-G Access Point with POE |
| Responsible Party | Po-Wen Cheng, Regulatory Compliance Manager, Po-Wen.Cheng@Belkin.com , 949-238-4518 |
| Technical Contact | Gary Chang, Advance Data Technology Corporation (Hwa Ya), Gary@adt.com.tw , 886-3-3183232 |
| Non-Technical Contact | Ellis Wu, Advance Data Technology Corporation, ellis@adt.com.tw , 886-3-3183232 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-3-3183232 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Zp0O7OKRZRajldrPOxictA== | 2006-12-19 | Class II permissive change or modification of presently authorized equipment |
| 1DblQUjEbKqcc3Vzk4S6Hw== | 2005-05-04 | Original Equipment |
Grants
TCB Grant - Application Zp0O7OKRZRajldrPOxictA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 12/19/2006 Application Dated: 12/19/2006 |
| LINKSYS LLC |
| 121 Theory Drive |
| Irvine, CA 92617 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WAP54GP |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless-G Access Point with POE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 | 15C | 2412.0 - 2462.0 | 0.028 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
EAS Grant - Application Zp0O7OKRZRajldrPOxictA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States |
Date of Grant: 12/19/2006 Application Dated: 12/19/2006 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WAP54GP |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless-G Access Point with POE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 | 15C | 2412.0 - 2462.0 | 0.028 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 05/04/2005 Application Dated: 05/04/2005 |
| LINKSYS LLC |
| 121 Theory Drive |
| Irvine, CA 92617 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WAP54GP |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless-G Access Point with POE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 | 15C | 2412.0 - 2462.0 | 0.028 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
EAS Grant - Application 1DblQUjEbKqcc3Vzk4S6Hw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States |
Date of Grant: 05/04/2005 Application Dated: 05/04/2005 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WAP54GP |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless-G Access Point with POE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 | 15C | 2412.0 - 2462.0 | 0.028 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
| Mail To: |