1. FCC ID
  2. Q87
  3. Q87-WCG200

FCC ID Q87-WCG200

Wireless-G Cable Gateway

by LINKSYS LLC

Grantee Code: Q87   Product Code: WCG200
Latest application date: 2003-09-17

FCC ID Device Details

FCC IDQ87-WCG200
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ87
Product CodeWCG200
Applicant BusinessLINKSYS LLC 🇺🇸
Related Domains belkin.com
Equipment ClassWireless-G Cable Gateway
Test FirmCompliance Certification Services Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2003-09-17
2412-2462 MHzOriginal Equipment2003-07-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2003-07-15PDF 2.2 MB
Internal Photos Metadata onlyInternal Photos2003-07-15PDF 796.1 KB
Internal Photos revisedInternal Photos2003-07-15PDF 811.7 KB
External Photos Metadata onlyExternal Photos2003-07-15PDF 1.1 MB
External Photos revisedExternal Photos2003-07-15PDF 1.2 MB
ID Label LocationID Label/Location Info2003-07-15PDF 44.3 KB
Antenna SpecificationOperational Description2003-09-17PDF 1.9 MB
Operational DescriptionOperational Description2003-07-15PDF 293.2 KB
Test Setup PhotosTest Setup Photos2003-07-15PDF 148.5 KB
Test ReportTest Report2003-09-17PDF 717 KB
Revised Test ReportTest Report2003-07-15PDF 576.9 KB
Test Report Metadata onlyTest Report2003-07-15PDF 471.9 KB
Description of ChangeCover Letter(s)2003-09-17PDF 14.6 KB
Confidentiality RequestCover Letter(s)2003-07-15PDF 22.8 KB
RF Exposure InfoRF Exposure Info2003-07-15PDF 22.8 KB
Block diagram 1 Metadata onlyBlock DiagramPDF 45.1 KB
Block diagram 2 Metadata onlyBlock DiagramPDF 193.9 KB
Schematics 1 Metadata onlySchematicsPDF 284.9 KB
Schematics 2 Metadata onlySchematicsPDF 99.7 KB

Application Information

Application IDuqVqoPpVcvqK49Lh/dU1tg==
Final Action Date2003-09-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009100470
ModelWCG200
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless-G Cable Gateway
Responsible PartyPo-Wen Cheng, Regulatory Compliance Manager, Po-Wen.Cheng@Belkin.com , 949-238-4518
AgentDaphne Daphne Daphne, Ecom Sertech Corp, 886-3-5913555
Test FirmPaul Liau, Compliance Certification Services Inc., pyla@itri.org.tw , 886-3-5915994
TCB Emailk.knoerig@emcc.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This Class II Permissive Change filing has added 1 additional antenna to the original filing.

Applications

Application IDDatePurpose
uqVqoPpVcvqK49Lh/dU1tg==2003-09-17Class II permissive change or modification of presently authorized equipment
KomGwoqm5MEi5NlTNuTuYg==2003-07-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.131000015CCE

Grants

TCB Grant - Application uqVqoPpVcvqK49Lh/dU1tg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  EMCCons DR RASEK GmbH & Co. KG
Stoernhofer Berg 15
Unterleinleiter, 91364
Germany 		Date of Grant: 09/17/2003

Application Dated: 09/17/2003
LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-WCG200
Name of Grantee:  LINKSYS LLC
Equipment Class: Digital Transmission System
Notes: Wireless-G Cable Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.131  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This Class II Permissive Change filing has added 1 additional antenna to the original filing.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application uqVqoPpVcvqK49Lh/dU1tg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
United States 		  Date of Grant: 09/17/2003

Application Dated: 09/17/2003
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-WCG200
Name of Grantee:  LINKSYS LLC
Equipment Class: Digital Transmission System
Notes: Wireless-G Cable Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.131  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This Class II Permissive Change filing has added 1 additional antenna to the original filing.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application KomGwoqm5MEi5NlTNuTuYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  EMCCons DR RASEK GmbH & Co. KG
Stoernhofer Berg 15
Unterleinleiter, 91364
Germany 		Date of Grant: 07/15/2003

Application Dated: 07/14/2003
LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-WCG200
Name of Grantee:  LINKSYS LLC
Equipment Class: Digital Transmission System
Notes: Wireless-G Cable Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.131  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application KomGwoqm5MEi5NlTNuTuYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
United States 		  Date of Grant: 07/15/2003

Application Dated: 07/14/2003
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-WCG200
Name of Grantee:  LINKSYS LLC
Equipment Class: Digital Transmission System
Notes: Wireless-G Cable Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.131  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: