FCC ID Q87-WMCE54AG

Wireless A + G mini-PCI Card

by LINKSYS LLC

Grantee Code: Q87   Product Code: WMCE54AG
Latest application date: 2004-09-29

FCC ID Device Details

FCC IDQ87-WMCE54AG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ87
Product CodeWMCE54AG
Applicant BusinessLINKSYS LLC 🇺🇸
Related Domains belkin.com
Equipment ClassWireless A + G mini-PCI Card
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2004-09-29
5150-5250 MHzOriginal Equipment2004-09-29

Exhibits

DocumentTypeAvailableFile
MamualUsers Manual2004-09-29PDF 1.3 MB
ManualUsers Manual2004-09-29PDF 1.3 MB
Int PhotosInternal Photos2004-09-29PDF 300.8 KB
Ext PhotosExternal Photos2004-09-29PDF 468.6 KB
LocationID Label/Location Info2004-09-29PDF 213.1 KB
SampleID Label/Location Info2004-09-29PDF 109.6 KB
Operational DescriptionOperational Description2004-09-29PDF 63 KB
Test Setup PicsTest Setup Photos2004-09-29PDF 266.9 KB
Test ReportTest Report2004-09-29PDF 2.5 MB
Confid RequestCover Letter(s)2004-09-29PDF 26.8 KB
DofCCover Letter(s)2004-09-29PDF 27.2 KB
Modular RequestCover Letter(s)2004-09-29PDF 115.6 KB
POACover Letter(s)2004-09-29PDF 26.7 KB
RF ExposureRF Exposure Info2004-09-29PDF 106.5 KB
RF Exposure InfoRF Exposure Info2004-09-29PDF 106.5 KB
Block Metadata onlyBlock DiagramPDF 198.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 198.7 KB
Schema Metadata onlySchematicsPDF 126.9 KB

Application Information

Application IDFrveLI1gDzRiRuOATH559Q==
Final Action Date2004-09-29
Application PurposeOriginal Equipment
Applicant FRN0009100470
ModelWMCE54AG
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless A + G mini-PCI Card
Responsible PartyPo-Wen Cheng, Regulatory Compliance Manager, Po-Wen.Cheng@Belkin.com , 949-238-4518
Technical ContactEllis Wu, Advance Data Technology Corporation, ellis@adt.com.tw , +886 3 318 3232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailhotline@americanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
FrveLI1gDzRiRuOATH559Q==2004-09-29Original Equipment
6ZkRoWYG2oDEpRSWSOKetA==2004-09-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.035000015CCC
5150-5250 MHz0.02115ECC
5250-5350 MHz0.02115ECC
5725-5825 MHz0.0215ECC

Grants

TCB Grant - Application FrveLI1gDzRiRuOATH559Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/29/2004

Application Dated: 09/29/2004
LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-WMCE54AG
Name of Grantee:  LINKSYS LLC
Equipment Class: Digital Transmission System
Notes: Wireless A + G mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.035  

Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application FrveLI1gDzRiRuOATH559Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
United States
  Date of Grant: 09/29/2004

Application Dated: 09/29/2004
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-WMCE54AG
Name of Grantee:  LINKSYS LLC
Equipment Class: Digital Transmission System
Notes: Wireless A + G mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.035  

Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6ZkRoWYG2oDEpRSWSOKetA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/29/2004

Application Dated: 09/29/2004
LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-WMCE54AG
Name of Grantee:  LINKSYS LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless A + G mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.021  
CC 15E 5250.0  -  5350.0 0.021  
CC 15E 5725.0  -  5825.0 0.02  

Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6ZkRoWYG2oDEpRSWSOKetA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LINKSYS LLC
121 Theory Drive
Irvine, CA 92617
United States
  Date of Grant: 09/29/2004

Application Dated: 09/29/2004
 
Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q87-WMCE54AG
Name of Grantee:  LINKSYS LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless A + G mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.021  
CC 15E 5250.0  -  5350.0 0.021  
CC 15E 5725.0  -  5825.0 0.02  

Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: