FCC ID Q87-WRT54GV2
Wireless-G Broadband Router
by LINKSYS LLC
Grantee Code: Q87 Product Code: WRT54GV2
Latest application date: 2004-04-14
FCC ID Device Details
| FCC ID | Q87-WRT54GV2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | Q87 |
| Product Code | WRT54GV2 |
| Applicant Business | LINKSYS LLC 🇺🇸 |
| Related Domains |  belkin.com |
| Equipment Class | Wireless-G Broadband Router |
| Test Firm | ECOM Sertech Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-04-14 |
| 2412-2462 MHz | Original Equipment | 2003-11-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2003-11-24 | PDF 706.2 KB |
| Internal Photos | Internal Photos | 2003-11-24 | PDF 265.2 KB |
| External Photos | External Photos | 2003-11-24 | PDF 2.1 MB |
| ID Label Location | ID Label/Location Info | 2003-11-24 | PDF 42.7 KB |
| Operational Description | Operational Description | 2003-11-24 | PDF 7.8 KB |
| Test Setup Photos | Test Setup Photos | 2003-11-24 | PDF 807.5 KB |
| Test Report | Test Report | 2004-04-14 | PDF 761.5 KB |
| Test Report | Test Report | 2003-11-24 | PDF 772.8 KB |
| User Selectable Frequencies | Attestation Statements | 2003-11-24 | PDF 359.6 KB |
| Description of Changes | Cover Letter(s) | 2004-04-14 | PDF 50.2 KB |
| Confidentiality Request | Cover Letter(s) | 2003-11-24 | PDF 432.5 KB |
| RF Exposure Info | RF Exposure Info | 2003-11-24 | PDF 862 KB |
| Block diagram Metadata only | Block Diagram | PDF 5.8 KB | |
| Schematics Metadata only | Schematics | PDF 137.9 KB |
Application Information
| Application ID | Jo1667s+q1lwnfiO43k7qg== |
|---|---|
| Final Action Date | 2004-04-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009100470 |
| Model | WRT54GV2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless-G Broadband Router |
| Responsible Party | Po-Wen Cheng, Regulatory Compliance Manager, Po-Wen.Cheng@Belkin.com , 949-238-4518 |
| Test Firm | C. Wu, ECOM Sertech Corp., cfwu@itri.org.tw  , 88635917069 |
| TCB Email | kknoerig@emcc.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Jo1667s+q1lwnfiO43k7qg== | 2004-04-14 | Class II permissive change or modification of presently authorized equipment |
| jvn4WyjNh90YOLPYCB7jPw== | 2003-11-24 | Original Equipment |
Grants
TCB Grant - Application jvn4WyjNh90YOLPYCB7jPw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
EMCCons DR RASEK GmbH & Co. KG Stoernhofer Berg 15 Unterleinleiter, 91364 Germany |
Date of Grant: 11/24/2003 Application Dated: 11/20/2003 |
| LINKSYS LLC |
| 121 Theory Drive |
| Irvine, CA 92617 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WRT54GV2 |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless-G Broadband Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.052 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application jvn4WyjNh90YOLPYCB7jPw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States |
Date of Grant: 11/24/2003 Application Dated: 11/20/2003 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WRT54GV2 |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless-G Broadband Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.052 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
EMCCons DR RASEK GmbH & Co. KG Stoernhofer Berg 15 Unterleinleiter, 91364 Germany |
Date of Grant: 04/14/2004 Application Dated: 04/14/2004 |
| LINKSYS LLC |
| 121 Theory Drive |
| Irvine, CA 92617 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WRT54GV2 |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless-G Broadband Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.052 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application Jo1667s+q1lwnfiO43k7qg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States |
Date of Grant: 04/14/2004 Application Dated: 04/14/2004 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WRT54GV2 |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless-G Broadband Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.052 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |