FCC ID Q87-WRT55AGV2
Wireless A+G Broadband Router
by LINKSYS LLC
Grantee Code: Q87 Product Code: WRT55AGV2
Latest application date: 2004-09-30
FCC ID Device Details
| FCC ID | Q87-WRT55AGV2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | Q87 |
| Product Code | WRT55AGV2 |
| Applicant Business | LINKSYS LLC 🇺🇸 |
| Related Domains |  belkin.com |
| Equipment Class | Wireless A+G Broadband Router |
| Test Firm | Advance Data Technology Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2004-09-30 |
| 5150-5250 MHz | Original Equipment | 2004-09-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual Part 1 | Users Manual | 2004-09-30 | PDF 3.3 MB |
| Users Manual Part 2 | Users Manual | 2004-09-30 | PDF 3.3 MB |
| Users Manual Part 3 | Users Manual | 2004-09-30 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2004-09-30 | PDF 974.2 KB |
| External Photos | External Photos | 2004-09-30 | PDF 801.1 KB |
| Label Location | ID Label/Location Info | 2004-09-30 | PDF 72.6 KB |
| Label Sample | ID Label/Location Info | 2004-09-30 | PDF 166.5 KB |
| Description | Operational Description | 2004-09-30 | PDF 46.2 KB |
| Test Setup Photos | Test Setup Photos | 2004-09-30 | PDF 176.9 KB |
| Test Report Part 1 | Test Report | 2004-09-30 | PDF 3.1 MB |
| Test Report Part 2 | Test Report | 2004-09-30 | PDF 3.7 MB |
| Test Report Part 3 | Test Report | 2004-09-30 | PDF 3.9 MB |
| Test Report Part 4 | Test Report | 2004-09-30 | PDF 2.4 MB |
| Test Report Part 5 | Test Report | 2004-09-30 | PDF 801.1 KB |
| Test Report Part 6 | Test Report | 2004-09-30 | PDF 1.7 MB |
| Confidentiality | Cover Letter(s) | 2004-09-30 | PDF 44.1 KB |
| DoC | Cover Letter(s) | 2004-09-30 | PDF 43.2 KB |
| POA | Cover Letter(s) | 2004-09-30 | PDF 39.1 KB |
| R F Exposure Info | RF Exposure Info | 2004-09-30 | PDF 91.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 76.7 KB | |
| Schematics Metadata only | Schematics | PDF 339.8 KB |
Application Information
| Application ID | c/MXiLiG01S0SpA+TUVoDQ== |
|---|---|
| Final Action Date | 2004-09-30 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0009100470 |
| Model | WRT55AGV2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless A+G Broadband Router |
| Responsible Party | Po-Wen Cheng, Regulatory Compliance Manager, Po-Wen.Cheng@Belkin.com , 949-238-4518 |
| Technical Contact | Ellis Wu, Advance Data Technology Corp., ellis@adt.com.tw  , +886-3-318-3232 |
| Test Firm | Stephen Chen, Advance Data Technology Corporation, stephen@adt.com.tw , 8862602180 |
| TCB Email | hotline@americantcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| c/MXiLiG01S0SpA+TUVoDQ== | 2004-09-30 | Original Equipment |
| CZaKDog6mS0v3X8QWg+t9Q== | 2004-09-30 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application CZaKDog6mS0v3X8QWg+t9Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/30/2004 Application Dated: 09/30/2004 |
| LINKSYS LLC |
| 121 Theory Drive |
| Irvine, CA 92617 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WRT55AGV2 |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless A+G Broadband Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.04 | ||
| CC | 15E | 5250.0 - 5350.0 | 0.041 | ||
| CC | 15E | 5725.0 - 5825.0 | 0.042 |
| Power Output listed is Conducted. The installation and operating configurations of this transmitter, including the antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of §2.1091. Within the 5.15-5.25 GHz band device is restricted to indoor use only. Only the antenna(s)sold with this product are authorized for use and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CZaKDog6mS0v3X8QWg+t9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States |
Date of Grant: 09/30/2004 Application Dated: 09/30/2004 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WRT55AGV2 |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless A+G Broadband Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.04 | ||
| CC | 15E | 5250.0 - 5350.0 | 0.041 | ||
| CC | 15E | 5725.0 - 5825.0 | 0.042 |
| Power Output listed is Conducted. The installation and operating configurations of this transmitter, including the antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of §2.1091. Within the 5.15-5.25 GHz band device is restricted to indoor use only. Only the antenna(s)sold with this product are authorized for use and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/30/2004 Application Dated: 09/30/2004 |
| LINKSYS LLC |
| 121 Theory Drive |
| Irvine, CA 92617 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WRT55AGV2 |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless A+G Broadband Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 |
| Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application c/MXiLiG01S0SpA+TUVoDQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States |
Date of Grant: 09/30/2004 Application Dated: 09/30/2004 |
| Attention: Po-Wen Cheng , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q87-WRT55AGV2 |
| Name of Grantee: | LINKSYS LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless A+G Broadband Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 |
| Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |