FCC ID Q87-WUSB6400M

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460

Date of Grant: 03/29/2017 Application Dated: 03/13/2017

LINKSYS LLC

121 Theory Drive

Irvine, CA 92617

Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q87-WUSB6400M
Name of Grantee:	LINKSYS LLC
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Linksys Dual-Band Wireless-AC USB Adapter

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.046
38 CC MO ND	15E	5260.0  -  5320.0	0.048
38 CC MO ND	15E	5500.0  -  5700.0	0.046
38 CC MO	15E	5745.0  -  5825.0	0.049

Power listed is the maximum combined conducted output power. SAR compliance has been established in the laptop computer(s) configurations with USB slot(s) configurations as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device has been tested and meets FCC RF exposure guidelines when used and positioned with a minimum of 5 mm from the body. The highest reported SAR for body use condition is 1.17 W/kg. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. This device has 20, 40, and 80 MHz bandwidth modes.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States

Date of Grant: 03/29/2017 Application Dated: 03/13/2017

Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q87-WUSB6400M
Name of Grantee:	LINKSYS LLC
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Linksys Dual-Band Wireless-AC USB Adapter
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.046
38 CC MO ND	15E	5260.0  -  5320.0	0.048
38 CC MO ND	15E	5500.0  -  5700.0	0.046
38 CC MO	15E	5745.0  -  5825.0	0.049

Power listed is the maximum combined conducted output power. SAR compliance has been established in the laptop computer(s) configurations with USB slot(s) configurations as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device has been tested and meets FCC RF exposure guidelines when used and positioned with a minimum of 5 mm from the body. The highest reported SAR for body use condition is 1.17 W/kg. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. This device has 20, 40, and 80 MHz bandwidth modes.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 1vtmAWjlArOdLPGp9kj9Qg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460

Date of Grant: 03/29/2017 Application Dated: 03/13/2017

LINKSYS LLC

121 Theory Drive

Irvine, CA 92617

Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q87-WUSB6400M
Name of Grantee:	LINKSYS LLC
Equipment Class:	Digital Transmission System
Notes:	Linksys Dual-Band Wireless-AC USB Adapter

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.374

Power listed is the maximum combined conducted output power. SAR compliance has been established in the laptop computer(s) configurations with USB slot(s) configurations as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device has been tested and meets FCC RF exposure guidelines when used and positioned with a minimum of 5 mm from the body. The highest reported SAR for body use condition is 0.92W/kg. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This device has 20 and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

LINKSYS LLC 121 Theory Drive Irvine, CA 92617 United States

Date of Grant: 03/29/2017 Application Dated: 03/13/2017

Attention: Po-Wen Cheng , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q87-WUSB6400M
Name of Grantee:	LINKSYS LLC
Equipment Class:	Digital Transmission System
Notes:	Linksys Dual-Band Wireless-AC USB Adapter
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.374

Power listed is the maximum combined conducted output power. SAR compliance has been established in the laptop computer(s) configurations with USB slot(s) configurations as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device has been tested and meets FCC RF exposure guidelines when used and positioned with a minimum of 5 mm from the body. The highest reported SAR for body use condition is 0.92W/kg. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This device has 20 and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: