FCC ID Q9DAP175SDR

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

National Technical Systems 41039 Boyce Road Fremont, CA 94538

Date of Grant: 06/10/2016 Application Dated: 06/08/2016

Hewlett Packard Enterprise Company

3333 Scott Blvd

Santa Clara, CA 95054

Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAP175SDR
Name of Grantee:	Hewlett Packard Enterprise Company
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n Wireless Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
48 CC MO	15E	5745.0  -  5825.0	0.938

Software Defined Radio. Power listed is the maximum combined peak conducted output power. Professional installation is required. Device is operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz BW modes. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change.

48:	The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States

Date of Grant: 06/10/2016 Application Dated: 06/08/2016

Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAP175SDR
Name of Grantee:	Hewlett Packard Enterprise Company
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n Wireless Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
48 CC MO	15E	5745.0  -  5825.0	0.938

Software Defined Radio. Power listed is the maximum combined peak conducted output power. Professional installation is required. Device is operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz BW modes. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change.

48:	The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ESJFPZElnnaEQVVOSZFQHQ==

EAS Grant - Application ESJFPZElnnaEQVVOSZFQHQ==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 94089 United States

Date of Grant: 08/20/2013 Application Dated: 01/11/2013

Attention: Robert Hastings , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAP175SDR
Name of Grantee:	Hewlett Packard Enterprise Company
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Outdoor Wireless LAN Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5260.0  -  5320.0	0.113
CC	15E	5270.0  -  5310.0	0.214
CC	15E	5500.0  -  5700.0	0.117
CC	15E	5510.0  -  5670.0	0.218

Power listed is the maximum combined conducted output power. This device has 20 MHz and 40 MHz BW modes. Emission within the 5600-5650 MHz band is prohibited. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Afy6MvUxuHInB6Y93n9nNA==

Mail To:

William Graff, Certification Manager

MiCOM Labs

440 Boulder Court Suite 200

Pleasanton, CA 94566

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 05/23/2012 Application Dated: 05/15/2012

Aruba Networks, Inc.

1344 Crossman Ave.

Sunnyvale, CA 94089

Attention: Robert Hastings , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAP175SDR
Name of Grantee:	Aruba Networks, Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n Wireless Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20	15C	2412.0  -  2462.0	0.964
20	15C	2422.0  -  2452.0	0.473
20	15C	5745.0  -  5825.0	0.938

Power Output listed is peak Conducted. Professional installation is required. Device is operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 35 cm from all persons. This device must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Aruba Networks, Inc. 1344 Crossman Ave. Sunnyvale, CA 94089 United States

Date of Grant: 05/23/2012 Application Dated: 05/15/2012

Attention: Robert Hastings , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAP175SDR
Name of Grantee:	Aruba Networks, Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n Wireless Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20	15C	2412.0  -  2462.0	0.964
20	15C	2422.0  -  2452.0	0.473
20	15C	5745.0  -  5825.0	0.938

Power Output listed is peak Conducted. Professional installation is required. Device is operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 35 cm from all persons. This device must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: