FCC ID Q9DAP22D
ACCESS POINT
by Hewlett Packard Enterprise Company
Grantee Code: Q9D Product Code: AP22D
Latest application date: 2023-12-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2023-12-14 |
| 5180-5240 MHz | Original Equipment | 2023-12-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Guide | Users Manual | 2024-06-05 | PDF 2 MB |
| Internal Photo | Internal Photos | 2024-06-05 | PDF 2.1 MB |
| External Photo | External Photos | 2024-06-05 | PDF 593.3 KB |
| AP22D Label and Location | ID Label/Location Info | 2023-12-14 | PDF 548.3 KB |
| Test Setup Photo | Test Setup Photos | 2024-06-05 | PDF 627.7 KB |
| Test Setup Photos_Referencing report | Test Setup Photos | 2024-06-05 | PDF 962 KB |
| AP22D Antenna Test Report | Test Report | 2023-12-14 | PDF 4.2 MB |
| Antenna Test Report | Test Report | 2023-12-14 | PDF 4.2 MB |
| DFS Test Report | Test Report | 2023-12-14 | PDF 3.3 MB |
| DTS Test Report | Test Report | 2023-12-14 | PDF 1.5 MB |
| NII Test Report | Test Report | 2023-12-14 | PDF 3.3 MB |
| Original 2.4G Wi-Fi Report_Part1 | Test Report | 2023-12-14 | PDF 4.8 MB |
| Original 2.4G Wi-Fi Report_Part2 | Test Report | 2023-12-14 | PDF 5.5 MB |
| Original 2.4G Wi-Fi Report_Part3 | Test Report | 2023-12-14 | PDF 2.4 MB |
| Original 5G Wi-Fi DFS Report | Test Report | 2023-12-14 | PDF 2.6 MB |
| Original 5G Wi-Fi Non-DFS Report_Part1 | Test Report | 2023-12-14 | PDF 4.2 MB |
| Original 5G Wi-Fi Non-DFS Report_Part2 | Test Report | 2023-12-14 | PDF 5.4 MB |
| Original 5G Wi-Fi Non-DFS Report_Part3 | Test Report | 2023-12-14 | PDF 5.2 MB |
| Original 5G Wi-Fi Non-DFS Report_Part4 | Test Report | 2023-12-14 | PDF 3.9 MB |
| Original 5G Wi-Fi Report_Part1 | Test Report | 2023-12-14 | PDF 3.8 MB |
| Original 5G Wi-Fi Report_Part2 | Test Report | 2023-12-14 | PDF 3.8 MB |
| 15B Attestation | Cover Letter(s) | 2023-12-14 | PDF 86.1 KB |
| Agent for service Attestation from Applicant-as-Agent | Attestation Statements | 2023-12-14 | PDF 66.2 KB |
| FCC 2.911d5 Attestation | Attestation Statements | 2023-12-14 | PDF 81.1 KB |
| Agent Auth Letter | Cover Letter(s) | 2023-12-14 | PDF 117.4 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2023-12-14 | PDF 95.1 KB |
| Declaration Letter For Data Reuse | Cover Letter(s) | 2023-12-14 | PDF 105.8 KB |
| FCC SDR Letter | Cover Letter(s) | 2023-12-14 | PDF 69.5 KB |
| Exposure Report | RF Exposure Info | 2023-12-14 | PDF 452.2 KB |
| AP22D Block_Diagram Metadata only | Block Diagram | PDF 236.1 KB | |
| Schematics Metadata only | Schematics | PDF 2.1 MB | |
| AP22D Project_FCC Data Reuse Inquire Metadata only | Operational Description | PDF 304.7 KB | |
| AP22D Theory of Operation Metadata only | Operational Description | PDF 268.8 KB | |
| FCC Data Reuse Inquire Metadata only | Operational Description | PDF 304.7 KB | |
| FCC Response to Inquiry Metadata only | Operational Description | PDF 540.4 KB | |
| AP22D_FCC SDR Security Description Metadata only | SDR Software/Security Info. | PDF 256.8 KB | |
| FCC SDR Security Description Metadata only | SDR Software/Security Info. | PDF 256.8 KB | |
| U-NII Device Security Metadata only | SDR Software/Security Info. | PDF 224 KB |
Application Information
| Application ID | rFFZPt2Tkh1dwGUmyUHxYw== |
|---|---|
| Final Action Date | 2023-12-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0026486175 |
| Model | AP22D |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | ACCESS POINT |
| Responsible Party | Mark Hill, Principal Engineer, mhill@hpe.com |
| Test Firm | Mr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/05/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Software Defined Radio. Output power listed is maximum combined conducted power. The device is a 2X2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user and installers must be provided with antenna installation instructions and transmitter operating procedure for satisfying RF exposure compliance. This device supports 20/40 MHz bandwidths. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rFFZPt2Tkh1dwGUmyUHxYw== | 2023-12-14 | Original Equipment |
| 0bDINh2q8IK1ODVrnem0Cg== | 2023-12-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application rFFZPt2Tkh1dwGUmyUHxYw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/14/2023 Application Dated: 12/08/2023 |
| Hewlett Packard Enterprise Company |
| 6280 America Center Drive |
| San Jose, CA 95002 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAP22D |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.19143 |
| Software Defined Radio. Output power listed is maximum combined conducted power. The device is a 2X2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user and installers must be provided with antenna installation instructions and transmitter operating procedure for satisfying RF exposure compliance. This device supports 20/40 MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rFFZPt2Tkh1dwGUmyUHxYw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 United States |
Date of Grant: 12/14/2023 Application Dated: 12/08/2023 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAP22D |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.19143 |
| Software Defined Radio. Output power listed is maximum combined conducted power. The device is a 2X2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-user and installers must be provided with antenna installation instructions and transmitter operating procedure for satisfying RF exposure compliance. This device supports 20/40 MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/14/2023 Application Dated: 12/08/2023 |
| Hewlett Packard Enterprise Company |
| 6280 America Center Drive |
| San Jose, CA 95002 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAP22D |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.15276 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.16749 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.15031 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.17498 |
| Software Defined Radio. Output power listed is maximum combined conducted power. The device is a 2X2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users and installers must be provided with antenna installation instructions and transmitter operating procedure for satisfying RF exposure compliance. This device supports 20/40/80 MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 0bDINh2q8IK1ODVrnem0Cg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 United States |
Date of Grant: 12/14/2023 Application Dated: 12/08/2023 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAP22D |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.15276 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.16749 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.15031 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.17498 |
| Software Defined Radio. Output power listed is maximum combined conducted power. The device is a 2X2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users and installers must be provided with antenna installation instructions and transmitter operating procedure for satisfying RF exposure compliance. This device supports 20/40/80 MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |