FCC ID Q9DAP32

ACCESS POINT

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: AP32
Latest application date: 2024-01-31

FCC ID Device Details

FCC IDQ9DAP32
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeAP32
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com
Equipment ClassACCESS POINT
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2024-01-31
5955-7095 MHzOriginal Equipment2024-01-31
2412-2462 MHzOriginal Equipment2024-01-31

Exhibits

DocumentTypeAvailableFile
AP32_IG_RVW-4Users Manual2024-07-29PDF 2 MB
2308RSU066-UE-Internal Photo_Rev2Internal Photos2024-07-29PDF 2.2 MB
TempConfidential_2308RSU066-UE-External PhotoExternal Photos2024-07-29PDF 660.8 KB
AP-615 Label and locationID Label/Location Info2024-01-31PDF 844.2 KB
TempConfidential_2308RSU066-UT-Test Setup Photo_Rev2Test Setup Photos2024-07-29PDF 627.8 KB
2308RSU066-U2-FCC DTS Test Report_Wi-Fi_Rev2_Part1Test Report2024-01-31PDF 3 MB
2308RSU066-U2-FCC DTS Test Report_Wi-Fi_Rev2_Part2Test Report2024-01-31PDF 2.1 MB
2308RSU066-U3-FCC NII Test Report_Wi-Fi_Rev2_Part1Test Report2024-01-31PDF 5.1 MB
2308RSU066-U3-FCC NII Test Report_Wi-Fi_Rev2_Part2Test Report2024-01-31PDF 2.7 MB
2308RSU066-U4-FCC DFS Test ReportTest Report2024-01-31PDF 2.1 MB
2308RSU066-U5-FCC NII Test Report_Wi-Fi 5.9G_Rev2Test Report2024-01-31PDF 3.7 MB
2308RSU066-U6-FCC 6ID Test Report_Wi-Fi 6E_Rev2Test Report2024-01-31PDF 3.8 MB
AP-615 Aruba_Antenna reportTest Report2024-01-31PDF 3.2 MB
AP-615_FCC 15B AttestationCover Letter(s)2024-01-31PDF 89.6 KB
AP-615_FCC 2.911d5 AttestationAttestation Statements2024-01-31PDF 64.6 KB
AP-615_FCC 5.9GHz DeclarationAttestation Statements2024-01-31PDF 83.1 KB
AP-615_FCC 6GHz DeclarationAttestation Statements2024-01-31PDF 70.6 KB
AP-615_FCC Agent for service Attestation from Applicant-as-AgentAttestation Statements2024-01-31PDF 65.3 KB
AP-615_FCC Agent Auth LetterCover Letter(s)2024-01-31PDF 90.5 KB
AP-615_FCC Confidentiality Request Letter_Long and Short TermCover Letter(s)2024-01-31PDF 71 KB
2308RSU066-U7-FCC Exposure Report_RevRF Exposure Info2024-01-31PDF 387.1 KB
Confidential_AP-615 Block_Daigram_FCC_v2.pdf Metadata onlyBlock DiagramPDF 1 MB
Confidential_AP-615 Schematic Metadata onlySchematicsPDF 2.2 MB
AP-615 Theory of Operation_Rev Metadata onlyOperational DescriptionPDF 344.4 KB
HPE Project APIN0615_FCC Data Referencing Inquire_20231229 Metadata onlyOperational DescriptionPDF 580.3 KB
Response to Inquiry to FCC APIN0615 Metadata onlyOperational DescriptionPDF 73.6 KB
AP-615_FCC SDR Security Description_Cloud_r1_1215 Metadata onlySDR Software/Security Info.PDF 289.4 KB
AP-615_SDR_Letter Metadata onlySDR Software/Security Info.PDF 90.8 KB
AP32_594280 D02 U-NII Device Security v01r03_sofware_r1_1215 Metadata onlySDR Software/Security Info.PDF 262.2 KB

Application Information

Application IDiBAA4Cbu8L+PAF+pofg/dg==
Final Action Date2024-01-31
Application PurposeOriginal Equipment
Applicant FRN0026486175
ModelAP32
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionACCESS POINT
Responsible PartyMark Hill, Principal Engineer, mhill@hpe.com , 650-236-7322
AgentMarlin Marlin Marlin, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , +8651266308358
Technical ContactRobin Wu, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com , +8651266308358
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/29/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower output is conducted for UNII band 1/2A/2C/3 and EIRP for UNII band 4. Device is a 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz, VHT/HE 80 MHz and VHT/HE 160 MHz bandwidth modes in WLAN 5GHz transmitter. It contains WLAN 2.4GHz/6GHz transmitters.

Applications

Application IDDatePurpose
iBAA4Cbu8L+PAF+pofg/dg==2024-01-31Original Equipment
Lc3d4b/mgr3JkeIKdK2CJg==2024-01-31Original Equipment
KuAsLdWtiYnIWmf+iJZylw==2024-01-31Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.153000015CCC, MO
5180-5240 MHz0.1515ECC, MO
5250 MHz0.05515ECC, MO, ND
5260-5320 MHz0.15515ECC, MO, ND
5500-5720 MHz0.17515ECC, MO, ND
5745-5825 MHz0.14715ECC, MO
5845-5885 MHz0.36615ECC, EP, MO
5955-7095 MHz0.335000015ECC, EP, MO

Grants

TCB Grant - Application Lc3d4b/mgr3JkeIKdK2CJg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 01/31/2024

Application Dated: 01/15/2024
Hewlett Packard Enterprise Company
6280 America Center Drive
San Jose, CA 95002
 
Attention: Mark Hill , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAP32
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.335  

Power Output listed is EIRP. Device is an 802.11ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HE 20 MHz, HE 40 MHz, HE 80 MHz and HE 160MHz bandwidth modes in WLAN 6GHz transmitter. Device 6 GHz operation is intended for indoor use only. It contains WLAN 2.4GHz/5GHz transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Lc3d4b/mgr3JkeIKdK2CJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
6280 America Center Drive
San Jose, CA 95002
United States
  Date of Grant: 01/31/2024

Application Dated: 01/15/2024
 
Attention: Mark Hill , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAP32
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.335  

Power Output listed is EIRP. Device is an 802.11ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HE 20 MHz, HE 40 MHz, HE 80 MHz and HE 160MHz bandwidth modes in WLAN 6GHz transmitter. Device 6 GHz operation is intended for indoor use only. It contains WLAN 2.4GHz/5GHz transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application KuAsLdWtiYnIWmf+iJZylw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 01/31/2024

Application Dated: 01/15/2024
Hewlett Packard Enterprise Company
6280 America Center Drive
San Jose, CA 95002
 
Attention: Mark Hill , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAP32
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.153  

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/HE 20 MHz and HT/HE 40 MHz bandwidth modes in WLAN 2.4GHz transmitter. It contains WLAN 5GHz/6GHz transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KuAsLdWtiYnIWmf+iJZylw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
6280 America Center Drive
San Jose, CA 95002
United States
  Date of Grant: 01/31/2024

Application Dated: 01/15/2024
 
Attention: Mark Hill , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAP32
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.153  

Output power listed is conducted. Device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/HE 20 MHz and HT/HE 40 MHz bandwidth modes in WLAN 2.4GHz transmitter. It contains WLAN 5GHz/6GHz transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application iBAA4Cbu8L+PAF+pofg/dg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 01/31/2024

Application Dated: 01/15/2024
Hewlett Packard Enterprise Company
6280 America Center Drive
San Jose, CA 95002
 
Attention: Mark Hill , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAP32
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.15  
CC MO ND 15E 5260.0  -  5320.0 0.155  
CC MO ND 15E 5500.0  -  5720.0 0.175  
CC MO 15E 5745.0  -  5825.0 0.147  
CC EP MO 15E 5845.0  -  5885.0 0.366  
CC MO ND 15E 5250.0  -  5250.0 0.055  

Power output is conducted for UNII band 1/2A/2C/3 and EIRP for UNII band 4. Device is a 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz, VHT/HE 80 MHz and VHT/HE 160 MHz bandwidth modes in WLAN 5GHz transmitter. It contains WLAN 2.4GHz/6GHz transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application iBAA4Cbu8L+PAF+pofg/dg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
6280 America Center Drive
San Jose, CA 95002
United States
  Date of Grant: 01/31/2024

Application Dated: 01/15/2024
 
Attention: Mark Hill , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAP32
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.15  
CC MO ND 15E 5260.0  -  5320.0 0.155  
CC MO ND 15E 5500.0  -  5720.0 0.175  
CC MO 15E 5745.0  -  5825.0 0.147  
CC EP MO 15E 5845.0  -  5885.0 0.366  
CC MO ND 15E 5250.0  -  5250.0 0.055  

Power output is conducted for UNII band 1/2A/2C/3 and EIRP for UNII band 4. Device is a 802.11 a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has HT/VHT/HE 20 MHz, HT/VHT/HE 40 MHz, VHT/HE 80 MHz and VHT/HE 160 MHz bandwidth modes in WLAN 5GHz transmitter. It contains WLAN 2.4GHz/6GHz transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: