FCC ID Q9DAPEX0100101

Access Point

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: APEX0100101
Latest application date: 2016-06-16

FCC ID Device Details

FCC IDQ9DAPEX0100101
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeAPEX0100101
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com
Equipment ClassAccess Point
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2016-06-16
5180-5240 MHzClass III permissive change to software defined radio2016-05-20
5260-5320 MHzClass III permissive change to software defined radio2014-12-30
2412-2462 MHzOriginal Equipment2014-03-14

Exhibits

DocumentTypeAvailableFile
Installation GuideUsers Manual2014-12-30PDF 2 MB
Professional installation Guide Metadata onlyUsers Manual2014-03-14PDF 181.5 KB
Professional installation Guide v2Users Manual2014-03-14PDF 50.2 KB
Q9DAPEX0100101_User Manual Metadata onlyUsers Manual2014-03-14PDF 1.9 MB
Q9DAPEX0100101_User Manual v2Users Manual2014-03-14PDF 1.8 MB
IntInternal Photos2014-12-30PDF 948.5 KB
Q9DAPEX0100101_Internal pictureInternal Photos2014-03-14PDF 1.1 MB
ExtExternal Photos2014-12-30PDF 858.8 KB
Q9DAPEX0100101_External pictureExternal Photos2014-03-14PDF 874.7 KB
eLabelingID Label/Location Info2014-12-30PDF 96.2 KB
Q9DAPEX0100101_Lable&locationID Label/Location Info2014-03-14PDF 1.9 MB
Test Setup PhotosTest Setup Photos2016-06-16PDF 654.3 KB
Q9DAPEX0100101_test SetupTest Setup Photos2014-03-14PDF 1.1 MB
Test Report DFSTest Report2016-06-16PDF 3.8 MB
Test Report-1Test Report2016-06-16PDF 4.2 MB
Test Report-2Test Report2016-06-16PDF 5 MB
Test Report pt 1Test Report2016-05-20PDF 3.9 MB
Test Report pt 2Test Report2016-05-20PDF 5.1 MB
DFS ReportTest Report2014-12-30PDF 1.8 MB
NII Part 1Test Report2014-12-30PDF 4.2 MB
NII Part 2Test Report2014-12-30PDF 5 MB
Q9DAPEX0100101_Report_EMCTest Report2014-03-14PDF 2.5 MB
Q9DAPEX0100101_Report_RF_1_v3Test Report2014-03-14PDF 3.8 MB
Q9DAPEX0100101_Report_RF_2_v3Test Report2014-03-14PDF 2.5 MB
Q9DAPEX0100101_Report_RF_3_v3Test Report2014-03-14PDF 4.4 MB
Class III PC AttestationAttestation Statements2016-06-16PDF 1.2 MB
DFS Band Operation-1Attestation Statements2016-05-20PDF 1.2 MB
DFS Band Operation-2Attestation Statements2016-05-20PDF 1.2 MB
AuthorizationCover Letter(s)2016-06-16PDF 1.2 MB
Class III permissive change letterCover Letter(s)2016-06-16PDF 1.2 MB
Software Config ControlCover Letter(s)2016-06-16PDF 1.2 MB
Class III permissive change letterCover Letter(s)2016-05-20PDF 1.2 MB
5600 5650 StatementCover Letter(s)2014-12-30PDF 30 KB
ConfidCover Letter(s)2014-12-30PDF 113.3 KB
Conformity StatementCover Letter(s)2014-12-30PDF 30.2 KB
DeclationCover Letter(s)2014-12-30PDF 30.3 KB
PCIII DeclarationCover Letter(s)2014-12-30PDF 30.2 KB
TDWR InstrustionsCover Letter(s)2014-12-30PDF 87.1 KB
Uniform SpreadingCover Letter(s)2014-12-30PDF 30 KB
Q9DAPEX0100101_ConfidentialityCover Letter(s)2014-03-14PDF 696.8 KB
Q9DAPEX0100101_Declaration of FCC applicationCover Letter(s)2014-03-14PDF 261.4 KB
Q9DAPEX0100101_letter of agencyCover Letter(s)2014-03-14PDF 370.5 KB
RF Exposure-1RF Exposure Info2016-06-16PDF 27.9 KB
RF Exposure-2RF Exposure Info2016-06-16PDF 99.8 KB
RF ExposureRF Exposure Info2016-05-20PDF 99.8 KB
Q9DAPEX0100101_Report_MPE Metadata onlyRF Exposure Info2014-03-14PDF 110.8 KB
Report_MPE1 Metadata onlyRF Exposure Info2014-03-14PDF 32.5 KB
Report_MPE_V3RF Exposure Info2014-03-14PDF 24.4 KB
Q9DAPEX0100101_Block diagram Metadata onlyBlock DiagramPDF 484.7 KB
Q9DAPEX0100101_Schematic Metadata onlySchematicsPDF 847.4 KB
Q9DAPEX0100101_operational description Metadata onlyOperational DescriptionPDF 22.3 KB
ANT-2X2-2314 Metadata onlySDR Software/Security InfPDF 760.6 KB
ANT-2X2-2714 Metadata onlySDR Software/Security InfPDF 442.9 KB
ANT-2X2-D607 Metadata onlySDR Software/Security InfPDF 416.2 KB
ANT-2X2-D805 Metadata onlySDR Software/Security InfPDF 417.5 KB
ANT-2x2-5314 Metadata onlySDR Software/Security InfPDF 840.5 KB
ANT-3X3-5712 Metadata onlySDR Software/Security InfPDF 1.8 MB
ANT-3x3-2005 Metadata onlySDR Software/Security InfPDF 665.9 KB
ANT-3x3-5005 Metadata onlySDR Software/Security InfPDF 702.3 KB
ANT-3x3-5010 Metadata onlySDR Software/Security InfPDF 736 KB
ANT-3x3-D608 Metadata onlySDR Software/Security InfPDF 108.7 KB
ANT-3x3-D905 Metadata onlySDR Software/Security InfPDF 126.5 KB
Antenna for APEX0100 Metadata onlySDR Software/Security InfPDF 918.9 KB
Q9DAPEX0100101_Security Description Metadata onlySDR Software/Security InfPDF 139.5 KB
SDR security Description Metadata onlySDR Software/Security InfPDF 163.1 KB
Sotware Security Description Metadata onlySDR Software/Security InfPDF 1.1 MB
UNII Security Description Metadata onlySDR Software/Security InfPDF 118.8 KB

Application Information

Application IDn06BiYvy2ehtSGKskWwiug==
Final Action Date2016-06-16
Application PurposeClass III permissive change to software defined radio
Applicant FRN0026486175
ModelAPEX0100101
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAccess Point
Responsible PartyPhillip Carranco, Compliance Manager, phillip.carranco@hpe.com , 650-236-9490
Technical ContactGordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , (925)462-0304
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsSoftware Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Applications

Application IDDatePurpose
n06BiYvy2ehtSGKskWwiug==2016-06-16Class III permissive change to software defined radio
+KMfIJwmmPvR7sHzTayAkg==2016-05-20Class III permissive change to software defined radio
dzvmgiiLLL7xkACTCmo1ug==2014-12-30Class III permissive change to software defined radio
cSEWT/dhxorawle/tebYOQ==2014-03-14Original Equipment
DUvtAMvwtI4uyUul0Y/Z7A==2014-03-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.9487415CCC, MO
5180-5240 MHz0.8915E38, CC, MO
5260-5320 MHz0.17315ECC, MO
5260-5320 MHz0.17315E38, CC, MO
5500-5580 MHz0.14115ECC, MO
5500-5720 MHz0.14115E38, CC, MO
5660-5720 MHz0.14115ECC, MO
5745-5825 MHz0.99815E38, CC, MO
5745-5825 MHz0.7992215CCC, MO

Grants

TCB Grant - Application n06BiYvy2ehtSGKskWwiug==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/16/2016

Application Dated: 06/01/2016
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.89  
38 CC MO 15E 5260.0  -  5320.0 0.173  
38 CC MO 15E 5500.0  -  5720.0 0.141  
38 CC MO 15E 5745.0  -  5825.0 0.998  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application n06BiYvy2ehtSGKskWwiug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 06/16/2016

Application Dated: 06/01/2016
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.89  
38 CC MO 15E 5260.0  -  5320.0 0.173  
38 CC MO 15E 5500.0  -  5720.0 0.141  
38 CC MO 15E 5745.0  -  5825.0 0.998  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application dzvmgiiLLL7xkACTCmo1ug==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/30/2014

Application Dated: 10/03/2014
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5260.0  -  5320.0 0.173  
CC MO 15E 5500.0  -  5580.0 0.141  
CC MO 15E 5660.0  -  5720.0 0.141  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application dzvmgiiLLL7xkACTCmo1ug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 12/30/2014

Application Dated: 10/03/2014
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5260.0  -  5320.0 0.173  
CC MO 15E 5500.0  -  5580.0 0.141  
CC MO 15E 5660.0  -  5720.0 0.141  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application DUvtAMvwtI4uyUul0Y/Z7A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/14/2014

Application Dated: 03/03/2014
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application DUvtAMvwtI4uyUul0Y/Z7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 03/14/2014

Application Dated: 03/03/2014
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application cSEWT/dhxorawle/tebYOQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/14/2014

Application Dated: 03/03/2014
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.94874  
CC MO 15C 5745.0  -  5825.0 0.79922  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz (5.8G Band) bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application cSEWT/dhxorawle/tebYOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 03/14/2014

Application Dated: 03/03/2014
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.94874  
CC MO 15C 5745.0  -  5825.0 0.79922  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz (5.8G Band) bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application +KMfIJwmmPvR7sHzTayAkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/20/2016

Application Dated: 05/16/2016
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.89  
38 CC MO 15E 5745.0  -  5825.0 0.998  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application +KMfIJwmmPvR7sHzTayAkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 05/20/2016

Application Dated: 05/16/2016
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0100101
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.89  
38 CC MO 15E 5745.0  -  5825.0 0.998  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11 device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: