FCC ID Q9DAPEX0102

Access Point

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: APEX0102
Latest application date: 2016-02-05

Device Images

FCC ID Device Details

FCC IDQ9DAPEX0102
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeAPEX0102
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com
Equipment ClassAccess Point
Test FirmIntertek Testing Services Limited Shanghai

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2016-02-05
5180-5240 MHzOriginal Equipment2014-12-24
2412-2462 MHzOriginal Equipment2014-12-24

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2016-02-05PDF 2 MB
TempConfidential_User ManualUsers Manual2015-06-22PDF 2 MB
Declaration about languages in the user manualCover Letter(s)2014-12-24PDF 322.3 KB
TempConfidential_Internal pictureInternal Photos2015-06-22PDF 1.9 MB
TempConfidential_External pictureExternal Photos2015-06-22PDF 470.9 KB
Label rev1 Metadata onlyID Label/Location Info2014-12-24PDF 160.2 KB
Label rev2ID Label/Location Info2014-12-24PDF 78.2 KB
test Setup rev2Test Setup Photos2016-02-05PDF 1,011.1 KB
TempConfidential_test SetupTest Setup Photos2015-06-22PDF 667 KB
DFS ReportTest Report2016-02-05PDF 2.4 MB
Report_FCC part 1Test Report2016-02-05PDF 3.4 MB
Report_FCC part 2Test Report2016-02-05PDF 3.4 MB
report_FCC UNII rev1Test Report2014-12-24PDF 3.2 MB
report_FCC_DTS_1Test Report2014-12-24PDF 4.5 MB
report_FCC_DTS_2Test Report2014-12-24PDF 3.4 MB
Confidentiality rev1Cover Letter(s)2016-02-05PDF 61.3 KB
FCC AgentCover Letter(s)2016-02-05PDF 350 KB
FCC DFS Uniform Spreading DeclarationCover Letter(s)2016-02-05PDF 473 KB
FCC SDR Class III Permissive Change Declaration rev1Cover Letter(s)2016-02-05PDF 73.9 KB
Confidentiality rev1Cover Letter(s)2014-12-24PDF 897.4 KB
FCC AgentCover Letter(s)2014-12-24PDF 349.5 KB
FCC DoCCover Letter(s)2014-12-24PDF 534.8 KB
report_FCC MPERF Exposure Info2016-02-05PDF 27.7 KB
report_FCC MPE rev1RF Exposure Info2014-12-24PDF 28.3 KB
Confidential_Block Metadata onlyBlock DiagramPDF 484.7 KB
Confidential_Block Metadata onlySchematicsPDF 484.7 KB
Confidential_Schematic Metadata onlySchematicsPDF 847.4 KB
Confidential_Antenna_Data sheet Metadata onlyOperational DescriptionPDF 709.1 KB
Confidential_operational description rev1 Metadata onlyOperational DescriptionPDF 102.2 KB
Confidential_operational description rev1 Metadata onlyOperational DescriptionPDF 28.2 KB
Confidential_Security for sofware rev1 Metadata onlySDR Software/Security InfPDF 69.1 KB
Security for SDR Metadata onlySDR Software/Security InfPDF 99.1 KB
Security for sofware Metadata onlySDR Software/Security InfPDF 70.8 KB
Security for sofware_594280 D02 v01r03 Metadata onlySDR Software/Security InfPDF 69 KB

Application Information

Application ID08C6e5a75XmtvOGeumLYFQ==
Final Action Date2016-02-05
Application PurposeClass III permissive change to software defined radio
Applicant FRN0026486175
ModelAPEX0102
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAccess Point
Responsible PartyPhillip Carranco, Compliance Manager, phillip.carranco@hpe.com , 650-236-9490
Agentwakeyou wakeyou wakeyou, Intertek Testing Services Limited Shanghai, wakeyou.wang@intertek.com , 86-21-61278448
Technical Contactwakeyou wang, Intertek Testing Services Limited Shanghai, wakeyou.wang@intertek.com , 86-21-61278448
Test FirmJonny Jing, Intertek Testing Services Limited Shanghai, jonny.jing@intertek.com , 86-21-61278271
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass III Permissive Change to add UNII Band 2-A and 2-C. Software Defined Radio. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Applications

Application IDDatePurpose
08C6e5a75XmtvOGeumLYFQ==2016-02-05Class III permissive change to software defined radio
q1vrjPuGLxWfOwpmy90njA==2014-12-24Original Equipment
ZTM2faaAT2IXOcZjEwstIQ==2014-12-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.676000015CCC, MO
5180-5240 MHz0.35115E38, CC, MO
5260-5320 MHz0.057715E38, CC, MO, ND
5500-5720 MHz0.050115E38, CC, MO, ND
5745-5825 MHz0.41615E38, CC, MO

Grants

TCB Grant - Application ZTM2faaAT2IXOcZjEwstIQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/24/2014

Application Dated: 12/08/2014
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0102
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.676  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ZTM2faaAT2IXOcZjEwstIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 12/24/2014

Application Dated: 12/08/2014
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0102
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.676  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application q1vrjPuGLxWfOwpmy90njA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/24/2014

Application Dated: 12/08/2014
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0102
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.351  
38 CC MO 15E 5745.0  -  5825.0 0.416  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application q1vrjPuGLxWfOwpmy90njA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 12/24/2014

Application Dated: 12/08/2014
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0102
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.351  
38 CC MO 15E 5745.0  -  5825.0 0.416  

Software Defined Radio. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 08C6e5a75XmtvOGeumLYFQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/05/2016

Application Dated: 11/16/2015
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0102
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.351  
38 CC MO ND 15E 5260.0  -  5320.0 0.0577  
38 CC MO ND 15E 5500.0  -  5720.0 0.0501  
38 CC MO 15E 5745.0  -  5825.0 0.416  

Class III Permissive Change to add UNII Band 2-A and 2-C.

Software Defined Radio. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 08C6e5a75XmtvOGeumLYFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 02/05/2016

Application Dated: 11/16/2015
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX0102
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.351  
38 CC MO ND 15E 5260.0  -  5320.0 0.0577  
38 CC MO ND 15E 5500.0  -  5720.0 0.0501  
38 CC MO 15E 5745.0  -  5825.0 0.416  

Class III Permissive Change to add UNII Band 2-A and 2-C.

Software Defined Radio. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: