FCC ID Q9DAPEX057457

ACCESS POINT

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: APEX057457
Latest application date: 2023-05-02

FCC ID Device Details

FCC IDQ9DAPEX057457
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeAPEX057457
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com
Equipment ClassACCESS POINT
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzClass III permissive change to software defined radio2023-05-02
5180-5240 MHzOriginal Equipment2020-04-28
2402-2480 MHzOriginal Equipment2020-04-28

Exhibits

DocumentTypeAvailableFile
User Manual_20200407_v1 - AP57X_User ManualUsers Manual2020-10-25PDF 2.4 MB
Internal Photos_20200407_v1 - 2003TW0002-Internal PhotoInternal Photos2020-10-25PDF 2.4 MB
ID Label & Location Info._20200407_v1 - AP57X-Label and Label Location Metadata onlyInternal Photos2020-04-28PDF 287 KB
External Photos_20200407_v1 - 2003TW0002-External PhotoExternal Photos2020-10-25PDF 1.3 MB
ID Label & Location Info._20200407_v1 - AP57X-Label and Label LocationID Label/Location Info2020-04-28PDF 287 KB
Test Setup PhotoTest Setup Photos2023-05-02PDF 106.5 KB
Test Setup Photos_20200420_v2 - 2003TW0002-UT-Test Setup PhotoTest Setup Photos2020-10-25PDF 1.1 MB
DFS Test ReportTest Report2023-05-02PDF 2.7 MB
Test Report_20200407_v1 - Annex A-DTS Test Data (APEX0574)_Part1Test Report2020-04-28PDF 5 MB
Test Report_20200407_v1 - Annex A-DTS Test Data (APEX0574)_Part2Test Report2020-04-28PDF 2.8 MB
Test Report_20200407_v1 - Annex C-DTS Test Data (APEX0577)_Part1Test Report2020-04-28PDF 4 MB
Test Report_20200407_v1 - Annex C-DTS Test Data (APEX0577)_Part2Test Report2020-04-28PDF 2.6 MB
Test Report_20200407_v1 - Annex F-UNII Test Data (APEX0577)_Part1Test Report2020-04-28PDF 4.8 MB
Test Report_20200407_v1 - Annex F-UNII Test Data (APEX0577)_Part2Test Report2020-04-28PDF 5 MB
Test Report_20200407_v1 - Annex F-UNII Test Data (APEX0577)_Part3Test Report2020-04-28PDF 4.6 MB
Test Report_20200407_v1 - Annex F-UNII Test Data (APEX0577)_Part4Test Report2020-04-28PDF 4.8 MB
Test Report_20200407_v1 - Annex F-UNII Test Data (APEX0577)_Part5Test Report2020-04-28PDF 5 MB
Test Report_20200407_v1 - Annex F-UNII Test Data (APEX0577)_Part6Test Report2020-04-28PDF 4.1 MB
Test Report_20200420_v2 - 2003TW0002-U1-FCC BLE Test Report (Bluetooth-LE)Test Report2020-04-28PDF 4.5 MB
Test Report_20200420_v2 - 2003TW0002-U2-FCC DTS Test Report (ZigBee)Test Report2020-04-28PDF 4.4 MB
Test Report_20200420_v2 - 2003TW0002-U3-FCC DTS Test Report (Wi-Fi)_Part1Test Report2020-04-28PDF 3.8 MB
Test Report_20200420_v2 - 2003TW0002-U3-FCC DTS Test Report (Wi-Fi)_Part2Test Report2020-04-28PDF 3.2 MB
Test Report_20200420_v2 - 2003TW0002-U4-FCC UNII Test Report (Wi-Fi)_Part1Test Report2020-04-28PDF 3.9 MB
Test Report_20200420_v2 - 2003TW0002-U4-FCC UNII Test Report (Wi-Fi)_Part2Test Report2020-04-28PDF 3.5 MB
Test Report_20200420_v2 - 2003TW0002-U5-FCC DFS Test Report_Part2Test Report2020-04-28PDF 1.2 MB
Test Report_20200420_v2 - Annex B-DTS Test Data (APEX0575) Metadata onlyTest Report2020-04-28PDF 4.9 MB
Test Report_20200420_v2 - Annex D-UNII Test Data (APEX0574)_Part1Test Report2020-04-28PDF 5.5 MB
Test Report_20200420_v2 - Annex D-UNII Test Data (APEX0574)_Part2Test Report2020-04-28PDF 5.4 MB
Test Report_20200420_v2 - Annex D-UNII Test Data (APEX0574)_Part3Test Report2020-04-28PDF 5.3 MB
Test Report_20200420_v2 - Annex D-UNII Test Data (APEX0574)_Part4Test Report2020-04-28PDF 5.5 MB
Test Report_20200420_v2 - Annex D-UNII Test Data (APEX0574)_Part5Test Report2020-04-28PDF 5.5 MB
Test Report_20200420_v2 - Annex D-UNII Test Data (APEX0574)_Part6Test Report2020-04-28PDF 5.5 MB
Test Report_20200420_v2 - Annex D-UNII Test Data (APEX0574)_Part7Test Report2020-04-28PDF 5.5 MB
Test Report_20200420_v2 - Annex D-UNII Test Data (APEX0574)_Part8Test Report2020-04-28PDF 4.5 MB
Test Report_20200420_v2 - Annex E-UNII Test Data (APEX0575)_Part1Test Report2020-04-28PDF 5.1 MB
Test Report_20200420_v2 - Annex E-UNII Test Data (APEX0575)_Part2Test Report2020-04-28PDF 5.2 MB
Test Report_20200420_v2 - Annex E-UNII Test Data (APEX0575)_Part3Test Report2020-04-28PDF 5 MB
Test Report_20200420_v2 - Annex E-UNII Test Data (APEX0575)_Part4Test Report2020-04-28PDF 5.2 MB
Test Report_20200420_v2 - Annex E-UNII Test Data (APEX0575)_Part5 Metadata onlyTest Report2020-04-28PDF 5.2 MB
Test Report_20200420_v2 - Annex E-UNII Test Data (APEX0575)_Part6Test Report2020-04-28PDF 2.2 MB
Test Report_20200421_v2 - 2003TW0002-U6-RF Exposure ReportRF Exposure Info2020-04-28PDF 255.9 KB
Test Report_20200421_v3 - 2003TW0002-U5-FCC DFS Test Report_Part1Test Report2020-04-28PDF 4.5 MB
Test Report_20200423_v1 - Annex B-DTS Test Data-APEX0575.pdfTest Report2020-04-28PDF 4.8 MB
Test Report_20200423_v1 - Annex E-UNII Test Data (APEX0575)_Part5 Rev2.pdfTest Report2020-04-28PDF 5.2 MB
Agent for service Attestation from AgentAttestation Statements2023-05-02PDF 80.8 KB
FCC 2.911d5 AttestationAttestation Statements2023-05-02PDF 80.4 KB
Attestations_20200407_v1 - AP57X_FCC 15B AttestationCover Letter(s)2020-04-28PDF 54.2 KB
Attestations_20200407_v1 - AP57X_FCC Agent Auth LetterCover Letter(s)2020-04-28PDF 77.4 KB
Attestations_20200407_v1 - AP57X_FCC Confidentiality Request Letter (Long and ShCover Letter(s)2020-04-28PDF 75.8 KB
Attestations_20200407_v1 - AP57X_Professional Installation AttestationCover Letter(s)2020-04-28PDF 49.1 KB
Attestations_20200407_v1 - AP57X_SDR_LetterCover Letter(s)2020-04-28PDF 48.4 KB
Agent Auth LetterCover Letter(s)2023-05-02PDF 211.6 KB
C3PC Statement LetterCover Letter(s)2023-05-02PDF 282.5 KB
Confidentiality Request LetterCover Letter(s)2023-05-02PDF 141.7 KB
Block Diagrams_20200407_v1 - AP57X_Block Diagram Metadata onlyBlock DiagramPDF 1.1 MB
Schematics_20200407_v1 - AP57X_Schematic Metadata onlySchematicsPDF 5.1 MB
OD_v1 - APEX057457_FCC Expedited Review Required Information_r3 Metadata onlyOperational DescriptionPDF 1.2 MB
OET Inquiry System Inquiry Metadata onlyOperational DescriptionPDF 244.3 KB
Operational Description_20200420_v3 - APEX057x_Theory of Operation_r6 Metadata onlyOperational DescriptionPDF 1.2 MB
Theory of Operation Metadata onlyOperational DescriptionPDF 1.4 MB
ZeroWait_FCC_DFS_TestPlan_BRCM Metadata onlyOperational DescriptionPDF 724.5 KB
Attestations_20200407_v1 - AP57X_594280 D02 U-NII Device Security v01r03_sofware Metadata onlySDR Software/Security InfPDF 156.1 KB
Attestations_20200407_v1 - AP57X_FCC SDR Security Description Metadata onlySDR Software/Security InfPDF 184.3 KB

Application Information

Application IDWyxLng4DDJsXJ8A5Xc7ljg==
Final Action Date2023-05-02
Application PurposeClass III permissive change to software defined radio
Applicant FRN0026486175
ModelAPEX057457
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionACCESS POINT
Responsible PartyMark Hill, Principal Engineer, mhill@hpe.com , 650-236-7322
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass 3 Permissive change to add the ZeroWait DFS feature with DFS master capability as documented in this filing. Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 4x4 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, and 160MHz bandwidth modes.

Applications

Application IDDatePurpose
WyxLng4DDJsXJ8A5Xc7ljg==2023-05-02Class III permissive change to software defined radio
DKzHA/WAX8y49Y42IhCJog==2020-04-28Original Equipment
6lkxXs4AflxHtboOZDdOGQ==2020-04-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.005615CCC
2405-2480 MHz0.00715CCC
2412-2462 MHz0.41615CCC, MO
5180-5240 MHz0.22815ECC, MO
5260-5320 MHz0.23415ECC, MO, ND
5500-5720 MHz0.2415ECC, MO, ND
5745-5825 MHz0.99115ECC, MO

Grants

TCB Grant - Application WyxLng4DDJsXJ8A5Xc7ljg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/02/2023

Application Dated: 04/30/2023
Hewlett Packard Enterprise Company
6280 America Center Drive
San Jose, CA 95002
 
Attention: Mark Hill , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX057457
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.228  
CC MO ND 15E 5260.0  -  5320.0 0.234  
CC MO ND 15E 5500.0  -  5720.0 0.24  
CC MO 15E 5745.0  -  5825.0 0.991  

Class 3 Permissive change to add the ZeroWait DFS feature with DFS master capability as documented in this filing.

Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 4x4 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, and 160MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application WyxLng4DDJsXJ8A5Xc7ljg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
6280 America Center Drive
San Jose, CA 95002
United States
  Date of Grant: 05/02/2023

Application Dated: 04/30/2023
 
Attention: Mark Hill , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX057457
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.228  
CC MO ND 15E 5260.0  -  5320.0 0.234  
CC MO ND 15E 5500.0  -  5720.0 0.24  
CC MO 15E 5745.0  -  5825.0 0.991  

Class 3 Permissive change to add the ZeroWait DFS feature with DFS master capability as documented in this filing.

Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 4x4 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, and 160MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application DKzHA/WAX8y49Y42IhCJog==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/28/2020

Application Dated: 04/22/2020
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX057457
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.228  
CC MO ND 15E 5260.0  -  5320.0 0.234  
CC MO ND 15E 5500.0  -  5720.0 0.24  
CC MO 15E 5745.0  -  5825.0 0.991  

Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 4x4 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, and 160MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application DKzHA/WAX8y49Y42IhCJog==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 04/28/2020

Application Dated: 04/22/2020
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX057457
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.228  
CC MO ND 15E 5260.0  -  5320.0 0.234  
CC MO ND 15E 5500.0  -  5720.0 0.24  
CC MO 15E 5745.0  -  5825.0 0.991  

Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 4x4 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, and 160MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 6lkxXs4AflxHtboOZDdOGQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/28/2020

Application Dated: 04/22/2020
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX057457
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0056  
CC 15C 2405.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2462.0 0.416  

Software Defined Radio Device. Power listed is peak conducted power for BT and Zigbee and maximum combined output average for WIFI 2.4GHz. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, and 40 MHz, bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 6lkxXs4AflxHtboOZDdOGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 04/28/2020

Application Dated: 04/22/2020
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPEX057457
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0056  
CC 15C 2405.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2462.0 0.416  

Software Defined Radio Device. Power listed is peak conducted power for BT and Zigbee and maximum combined output average for WIFI 2.4GHz. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, and 40 MHz, bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: