FCC ID Q9DAPIN0103
Wireless Access Point
by Hewlett Packard Enterprise Company
Grantee Code: Q9D Product Code: APIN0103
Latest application date: 2016-07-27
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class III permissive change to software defined radio | 2016-07-27 |
| 5180-5240 MHz | Class III permissive change to software defined radio | 2016-05-23 |
| 5180-5240 MHz | Class III permissive change to software defined radio | 2015-01-08 |
| 5180-5240 MHz | Original Equipment | 2014-03-05 |
| 2412-2462 MHz | Original Equipment | 2014-03-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2014-12-25 | PDF 747 KB |
| user manual | Users Manual | 2014-03-05 | PDF 747 KB |
| Photos Internal | Internal Photos | 2014-12-25 | PDF 481.8 KB |
| TempConfidential_Q9DAPIN0103_Internal photo | Internal Photos | 2014-09-01 | PDF 2.3 MB |
| Photos External | External Photos | 2014-12-25 | PDF 211.2 KB |
| Q9DAPIN0103_External photo | External Photos | 2014-03-05 | PDF 741.1 KB |
| Label | ID Label/Location Info | 2014-03-05 | PDF 196 KB |
| Tst Photos | Test Setup Photos | 2016-07-27 | PDF 1,010.5 KB |
| Tst Photos | Test Setup Photos | 2016-05-23 | PDF 794.8 KB |
| Photos DFS | Test Setup Photos | 2014-12-25 | PDF 130.7 KB |
| Photos Test Setup Metadata only | Test Setup Photos | 2014-12-25 | PDF 765.5 KB |
| Test SetUp Photos revised | Test Setup Photos | 2014-12-25 | PDF 803.9 KB |
| Q9DAPIN0103_test Setup | Test Setup Photos | 2014-03-05 | PDF 792.2 KB |
| Tst Rep DFS | Test Report | 2016-07-27 | PDF 1.4 MB |
| Tst Rep NII | Test Report | 2016-07-27 | PDF 802.8 KB |
| Tst Rpt 1 | Test Report | 2016-05-23 | PDF 4.1 MB |
| Tst Rpt 2 | Test Report | 2016-05-23 | PDF 5.6 MB |
| Tst Rpt 3 | Test Report | 2016-05-23 | PDF 2.5 MB |
| DFS Report | Test Report | 2015-01-08 | PDF 1,023.7 KB |
| NII Test Report revised Part 1 | Test Report | 2015-01-08 | PDF 4.7 MB |
| NII Test Report revised Part 2 | Test Report | 2015-01-08 | PDF 4.7 MB |
| NII Test Report revised Part 3 | Test Report | 2015-01-08 | PDF 1 MB |
| Test Report Part 1 Metadata only | Test Report | 2015-01-08 | PDF 3 MB |
| Test Report Part 2 Metadata only | Test Report | 2015-01-08 | PDF 4 MB |
| report_15.247_01 | Test Report | 2014-03-05 | PDF 4.1 MB |
| report_15.247_02 | Test Report | 2014-03-05 | PDF 5.6 MB |
| report_15.247_03 | Test Report | 2014-03-05 | PDF 2.5 MB |
| report_15.407 | Test Report | 2014-03-05 | PDF 3.7 MB |
| Attestation Ltr | Cover Letter(s) | 2016-07-27 | PDF 1.2 MB |
| UNII-3 Attestation | Attestation Statements | 2016-05-23 | PDF 1.2 MB |
| Attestation Letter | Attestation Statements | 2015-01-08 | PDF 432.8 KB |
| Attestation re DFS functionality for straddle channels | Attestation Statements | 2015-01-08 | PDF 97.3 KB |
| Auth Ltr | Cover Letter(s) | 2016-07-27 | PDF 206 KB |
| Cvr Ltr | Cover Letter(s) | 2016-07-27 | PDF 28.6 KB |
| PC letter | Cover Letter(s) | 2016-07-27 | PDF 1.2 MB |
| Confid Ltr | Cover Letter(s) | 2016-05-23 | PDF 125.9 KB |
| Cvr Ltr | Cover Letter(s) | 2016-05-23 | PDF 28.7 KB |
| Permissive Change Ltr | Cover Letter(s) | 2016-05-23 | PDF 1.2 MB |
| Authorization Letter | Cover Letter(s) | 2015-01-08 | PDF 153 KB |
| C3PC Letter | Cover Letter(s) | 2015-01-08 | PDF 30.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2015-01-08 | PDF 134.9 KB |
| Declaration of application_rev | Cover Letter(s) | 2014-03-05 | PDF 261.1 KB |
| Q9DAPIN0103_confidentiality&agent | Cover Letter(s) | 2014-03-05 | PDF 1 MB |
| RF Exposure Report | RF Exposure Info | 2015-01-08 | PDF 260.5 KB |
| Q9DAPIN0103_MPE | RF Exposure Info | 2014-03-05 | PDF 32.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 76.6 KB | |
| Confidential_Q9DAPIN0103_Block diagram Metadata only | Block Diagram | PDF 76.6 KB | |
| Confidential_Q9DAPIN0103_Schematic Metadata only | Schematics | PDF 435.2 KB | |
| Schematic Metadata only | Schematics | PDF 435.2 KB | |
| Confidential_Q9DAPIN0103_Operational description Metadata only | Operational Description | PDF 84.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 84.3 KB | |
| Confidential_Q9DAPIN0103_Security Descriptio Metadata only | SDR Software/Security Inf | PDF 139.5 KB | |
| Confidential_Q9DAPIN0103_Security Description Metadata only | SDR Software/Security Inf | PDF 139.5 KB | |
| No Change Ltr Metadata only | SDR Software/Security Inf | PDF 1.2 MB | |
| SDR Security Metadata only | SDR Software/Security Inf | PDF 118.4 KB | |
| Software Security Metadata only | SDR Software/Security Inf | PDF 155 KB |
Application Information
| Application ID | duXmpF1mGNq3+kkcnTpKFw== |
|---|---|
| Final Action Date | 2016-07-27 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0026486175 |
| Model | APIN0103 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Access Point |
| Responsible Party | Phillip Carranco, Compliance Manager, phillip.carranco@hpe.com  , 650-236-9490 |
| Agent | Mark Mark Mark, National Technical Systems - Silicon Valley, svdoc@nts.com  , 5105783500 |
| Technical Contact | Mark Hill, National Technical Systems - Silicon Valley, svdoc@nts.com , 5105783500 |
| Test Firm | David Bare, National Technical Systems, david.bare@nts.com , 510-578-3500 |
| TCB Email | svtcb@nts.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth modes. Class III Permissive Change to enable operation in UNII-2 bands and update UNII-3 band. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| duXmpF1mGNq3+kkcnTpKFw== | 2016-07-27 | Class III permissive change to software defined radio |
| IRPBc9x0XdDs7OrLYR7EsA== | 2016-05-23 | Class III permissive change to software defined radio |
| 1PU+nexQut5nUi/mfpty6w== | 2015-01-08 | Class III permissive change to software defined radio |
| QTS5Lwop0wls+QOWYwNGCw== | 2014-03-05 | Original Equipment |
| G+NHgiBqRlkusWm+XF+XYQ== | 2014-03-05 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.805 | 15C | CC, MO |
| 5180-5240 MHz | 0.048 | 15E | CC, MO |
| 5180-5240 MHz | 0.048 | 15E | 49, CC, MO |
| 5180-5240 MHz | 0.0480000 | 15E | CC, MO |
| 5260-5320 MHz | 0.1756 | 15E | CC, MO |
| 5260-5320 MHz | 0.1756 | 15E | 49, CC, MO |
| 5500-5580 MHz | 0.137 | 15E | CC, MO |
| 5500-5720 MHz | 0.172 | 15E | 49, CC, MO |
| 5660-5720 MHz | 0.172 | 15E | CC, MO |
| 5745-5825 MHz | 0.689 | 15C | CC, MO |
| 5745-5825 MHz | 0.689 | 15E | 49, CC, MO |
| 5745-5825 MHz | 0.178 | 15E | 49, CC, MO |
Grants
TCB Grant - Application QTS5Lwop0wls+QOWYwNGCw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/05/2014 Application Dated: 02/20/2014 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application QTS5Lwop0wls+QOWYwNGCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 03/05/2014 Application Dated: 02/20/2014 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
National Technical Systems 41039 Boyce Road Fremont, CA 94538 |
Date of Grant: 05/23/2016 Application Dated: 05/19/2016 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.689 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth modes. Class III Permissive Change to disable operation in UNII-2 bands and update UNII-3 band. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application IRPBc9x0XdDs7OrLYR7EsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 05/23/2016 Application Dated: 05/19/2016 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.689 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth modes. Class III Permissive Change to disable operation in UNII-2 bands and update UNII-3 band. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/05/2014 Application Dated: 02/20/2014 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.805 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.689 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application G+NHgiBqRlkusWm+XF+XYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 03/05/2014 Application Dated: 02/20/2014 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.805 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.689 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
National Technical Systems 41039 Boyce Road Fremont, CA 94538 |
Date of Grant: 07/27/2016 Application Dated: 07/13/2016 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| 49 CC MO | 15E | 5260.0 - 5320.0 | 0.1756 | ||
| 49 CC MO | 15E | 5500.0 - 5720.0 | 0.172 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.178 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth modes. Class III Permissive Change to enable operation in UNII-2 bands and update UNII-3 band. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application duXmpF1mGNq3+kkcnTpKFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/27/2016 Application Dated: 07/13/2016 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| 49 CC MO | 15E | 5260.0 - 5320.0 | 0.1756 | ||
| 49 CC MO | 15E | 5500.0 - 5720.0 | 0.172 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.178 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth modes. Class III Permissive Change to enable operation in UNII-2 bands and update UNII-3 band. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/08/2015 Application Dated: 10/14/2014 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1756 | ||
| CC MO | 15E | 5500.0 - 5580.0 | 0.137 | ||
| CC MO | 15E | 5660.0 - 5720.0 | 0.172 |
| Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Use in the 5150-5250 MHz and 5470-5725 MHz bands is restricted to indoor operation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1PU+nexQut5nUi/mfpty6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 01/08/2015 Application Dated: 10/14/2014 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1756 | ||
| CC MO | 15E | 5500.0 - 5580.0 | 0.137 | ||
| CC MO | 15E | 5660.0 - 5720.0 | 0.172 |
| Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Use in the 5150-5250 MHz and 5470-5725 MHz bands is restricted to indoor operation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |