FCC ID Q9DAPIN0214215

Wireless Access Point

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: APIN0214215
Latest application date: 2016-07-20

FCC ID Device Details

FCC IDQ9DAPIN0214215
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeAPIN0214215
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com
Equipment ClassWireless Access Point
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2016-07-20
5180-5240 MHzClass III permissive change to software defined radio2016-05-19
5180-5240 MHzClass III permissive change to software defined radio2014-12-29
5180-5240 MHzOriginal Equipment2014-07-16
2412-2462 MHzOriginal Equipment2014-07-16

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2014-12-29PDF 953.7 KB
Revised ManualUsers Manual2014-12-29PDF 1.3 MB
ManualUsers Manual2014-07-16PDF 961.4 KB
214Internal Photos2014-07-16PDF 678.4 KB
215Internal Photos2014-07-16PDF 665.6 KB
Ext 214External Photos2014-12-29PDF 554.6 KB
Ext 215External Photos2014-12-29PDF 563.2 KB
214External Photos2014-07-16PDF 554.6 KB
215External Photos2014-07-16PDF 563.2 KB
eLabelID Label/Location Info2014-12-29PDF 134.6 KB
E-LabelID Label/Location Info2014-07-16PDF 134.6 KB
Test Setup PhotosTest Setup Photos2016-07-20PDF 1.4 MB
SetupTest Setup Photos2014-12-29PDF 391.4 KB
SetupTest Setup Photos2014-07-16PDF 243.2 KB
Test Report DFSTest Report2016-07-20PDF 3.9 MB
Test Report-1Test Report2016-07-20PDF 4.3 MB
Test Report-2Test Report2016-07-20PDF 1.8 MB
Test ReportTest Report2016-05-19PDF 5.6 MB
Part 1Test Report2014-12-29PDF 5.8 MB
Part 2Test Report2014-12-29PDF 2.7 MB
Part 3Test Report2014-12-29PDF 3.4 MB
NIITest Report2014-07-16PDF 3.5 MB
Part 1Test Report2014-07-16PDF 5.5 MB
Part 2Test Report2014-07-16PDF 3.6 MB
Class III PC AttestationAttestation Statements2016-07-20PDF 1.2 MB
Professional Installation AttestationAttestation Statements2014-12-29PDF 194.8 KB
AuthorizationCover Letter(s)2016-07-20PDF 1.2 MB
Class III permissive change letterCover Letter(s)2016-07-20PDF 1.2 MB
Software Config ControlCover Letter(s)2016-07-20PDF 1.2 MB
Class III permissive change letterCover Letter(s)2016-05-19PDF 1.2 MB
SDR Security DescriptionCover Letter(s)2016-05-19PDF 163.1 KB
UNII Security DescriptionCover Letter(s)2016-05-19PDF 118.8 KB
5600 5650 StatementCover Letter(s)2014-12-29PDF 90.8 KB
AuthorizationCover Letter(s)2014-12-29PDF 100.1 KB
ConfidCover Letter(s)2014-12-29PDF 53.5 KB
Conformity StatementCover Letter(s)2014-12-29PDF 91.4 KB
DFS DeclarationCover Letter(s)2014-12-29PDF 93.5 KB
PCIII DeclarationCover Letter(s)2014-12-29PDF 91.4 KB
TDWR InstructionsCover Letter(s)2014-12-29PDF 102.6 KB
Uniform SpreadingCover Letter(s)2014-12-29PDF 90.4 KB
AuthorizationCover Letter(s)2014-07-16PDF 66.2 KB
RF Exposure-1RF Exposure Info2016-07-20PDF 40.6 KB
RF Exposure-2RF Exposure Info2016-07-20PDF 99.2 KB
RF ExposureRF Exposure Info2016-05-19PDF 99.2 KB
RFxRF Exposure Info2014-12-29PDF 40.6 KB
RFXRF Exposure Info2014-07-16PDF 38 KB
RFxRF Exposure Info2014-07-16PDF 38 KB
Block Metadata onlyBlock DiagramPDF 108.9 KB
Schema Metadata onlySchematicsPDF 1.2 MB
Ops Metadata onlyOperational DescriptionPDF 274.7 KB
SDR Description Metadata onlySDR Software/Security InfPDF 139.4 KB
Software Security Description Metadata onlySDR Software/Security InfPDF 486.8 KB
Parts Metadata onlyParts List/Tune Up InfoPDF 295.4 KB

Application Information

Application IDJpkFyhf3DPO7Aa/yEVMLDw==
Final Action Date2016-07-20
Application PurposeClass III permissive change to software defined radio
Applicant FRN0026486175
ModelAPIN0214215
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Access Point
Responsible PartyPhillip Carranco, Compliance Manager, phillip.carranco@hpe.com , 650-236-9490
Technical ContactGordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , (925)462-0304
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes.

Applications

Application IDDatePurpose
JpkFyhf3DPO7Aa/yEVMLDw==2016-07-20Class III permissive change to software defined radio
9rYhZv3Ic0jEO6Xdm74REg==2016-05-19Class III permissive change to software defined radio
FBAwxnyUtJhYBHBaWjpaSg==2014-12-29Class III permissive change to software defined radio
vy+vkpR3dBXexQQjP6okFA==2014-07-16Original Equipment
pGS41ICtzND9kTY2leHL+Q==2014-07-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.21515CCC, MO
2422-2452 MHz0.20415CCC, MO
5180-5240 MHz0.55815E38, CC, MO
5180-5240 MHz0.04915ECC, MO
5180-5240 MHz0.04815ECC, MO
5190-5230 MHz0.04815ECC, MO
5210 MHz0.04915ECC, MO
5260-5320 MHz0.17415ECC, MO
5260-5320 MHz0.17415E38, CC, MO
5500-5580 MHz0.17515ECC, MO
5500-5720 MHz0.17515E38, CC, MO
5660-5720 MHz0.17515ECC, MO
5745-5825 MHz0.57315E38, CC, MO
5745-5825 MHz0.19415CCC, MO
5755-5795 MHz0.18915CCC, MO
5775 MHz0.15715CCC, MO

Grants

TCB Grant - Application vy+vkpR3dBXexQQjP6okFA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/16/2014

Application Dated: 06/30/2014
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.048  
CC MO 15E 5210.0  -  5210.0 0.049  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150-5250 MHz Band.

Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application vy+vkpR3dBXexQQjP6okFA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 07/16/2014

Application Dated: 06/30/2014
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.048  
CC MO 15E 5210.0  -  5210.0 0.049  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150-5250 MHz Band.

Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application pGS41ICtzND9kTY2leHL+Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/16/2014

Application Dated: 06/30/2014
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.215  
CC MO 15C 2422.0  -  2452.0 0.204  
CC MO 15C 5745.0  -  5825.0 0.194  
CC MO 15C 5755.0  -  5795.0 0.189  
CC MO 15C 5775.0  -  5775.0 0.157  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11a/b/g/n/ac access point in a 3X3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application pGS41ICtzND9kTY2leHL+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 07/16/2014

Application Dated: 06/30/2014
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.215  
CC MO 15C 2422.0  -  2452.0 0.204  
CC MO 15C 5745.0  -  5825.0 0.194  
CC MO 15C 5755.0  -  5795.0 0.189  
CC MO 15C 5775.0  -  5775.0 0.157  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11a/b/g/n/ac access point in a 3X3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application JpkFyhf3DPO7Aa/yEVMLDw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/20/2016

Application Dated: 06/01/2016
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.558  
38 CC MO 15E 5260.0  -  5320.0 0.174  
38 CC MO 15E 5500.0  -  5720.0 0.175  
38 CC MO 15E 5745.0  -  5825.0 0.573  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application JpkFyhf3DPO7Aa/yEVMLDw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 07/20/2016

Application Dated: 06/01/2016
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.558  
38 CC MO 15E 5260.0  -  5320.0 0.174  
38 CC MO 15E 5500.0  -  5720.0 0.175  
38 CC MO 15E 5745.0  -  5825.0 0.573  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application FBAwxnyUtJhYBHBaWjpaSg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/29/2014

Application Dated: 10/03/2014
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  
CC MO 15E 5260.0  -  5320.0 0.174  
CC MO 15E 5500.0  -  5580.0 0.175  
CC MO 15E 5660.0  -  5720.0 0.175  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150-5250 MHz Band.

Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application FBAwxnyUtJhYBHBaWjpaSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 12/29/2014

Application Dated: 10/03/2014
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  
CC MO 15E 5260.0  -  5320.0 0.174  
CC MO 15E 5500.0  -  5580.0 0.175  
CC MO 15E 5660.0  -  5720.0 0.175  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150-5250 MHz Band.

Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 9rYhZv3Ic0jEO6Xdm74REg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/19/2016

Application Dated: 05/16/2016
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.558  
38 CC MO 15E 5745.0  -  5825.0 0.573  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 9rYhZv3Ic0jEO6Xdm74REg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 05/19/2016

Application Dated: 05/16/2016
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0214215
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.558  
38 CC MO 15E 5745.0  -  5825.0 0.573  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Software Defined Radio. This device is capable of 20MHz, 40MHz, and 80MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: