FCC ID Q9DAPIN0228
Wireless Access Point
by Hewlett Packard Enterprise Company
Grantee Code: Q9D Product Code: APIN0228
Latest application date: 2016-07-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-22 |
| 5180-5240 MHz | Original Equipment | 2015-03-10 |
| 2412-2462 MHz | Original Equipment | 2015-03-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| AP228_datasheet | Users Manual | 2015-03-10 | PDF 359.4 KB |
| User guide_1 | Users Manual | 2015-03-10 | PDF 1.2 MB |
| Internal picture | Internal Photos | 2015-03-10 | PDF 827.8 KB |
| External picture | External Photos | 2015-03-10 | PDF 72.5 KB |
| Lable Location | ID Label/Location Info | 2015-03-10 | PDF 2.6 MB |
| Lable_1 | ID Label/Location Info | 2015-03-10 | PDF 605.5 KB |
| Test Setup | Test Setup Photos | 2015-03-10 | PDF 801.9 KB |
| RF report-FCC_1 | Test Report | 2016-07-22 | PDF 5 MB |
| RF report-FCC_2 | Test Report | 2016-07-22 | PDF 4.3 MB |
| RF report-FCC_part 1 Metadata only | Test Report | 2016-07-22 | PDF 5 MB |
| RF report-FCC_part 2 Metadata only | Test Report | 2016-07-22 | PDF 4.3 MB |
| Report_DFS | Test Report | 2016-07-22 | PDF 2.3 MB |
| FCC DTS | Test Report | 2015-03-10 | PDF 475.3 KB |
| FCC DTS_1 Metadata only | Test Report | 2015-03-10 | PDF 413.4 KB |
| FCC UNII | Test Report | 2015-03-10 | PDF 2.7 MB |
| FCC UNII_1 Metadata only | Test Report | 2015-03-10 | PDF 3.1 MB |
| Report_FCC DTS Test Plots A | Test Report | 2015-03-10 | PDF 2.6 MB |
| Report_FCC DTS Test Plots B | Test Report | 2015-03-10 | PDF 2 MB |
| Confidentiality | Cover Letter(s) | 2016-07-22 | PDF 2.3 MB |
| FCC Class III Permissive Change Declaration | Cover Letter(s) | 2016-07-22 | PDF 2.3 MB |
| FCC Declaration-Straddle 5725MHz | Cover Letter(s) | 2016-07-22 | PDF 29.6 KB |
| FCC agent | Cover Letter(s) | 2016-07-22 | PDF 1.3 MB |
| Confidentiality | Cover Letter(s) | 2015-03-10 | PDF 99.8 KB |
| Declaration of FCC Application | Cover Letter(s) | 2015-03-10 | PDF 32.2 KB |
| FCC DOC letter | Cover Letter(s) | 2015-03-10 | PDF 62.7 KB |
| FCC agency | Cover Letter(s) | 2015-03-10 | PDF 39.7 KB |
| FCC MPE Report | RF Exposure Info | 2016-07-22 | PDF 63.4 KB |
| Report_MPE | RF Exposure Info | 2015-03-10 | PDF 82.9 KB |
| Confidential_Block Metadata only | Block Diagram | PDF 210.6 KB | |
| Confidential_Schematics Metadata only | Schematics | PDF 870.5 KB | |
| AP-228 operational description Metadata only | Operational Description | PDF 82.6 KB | |
| Confidential_Operational description_2 Metadata only | Operational Description | PDF 131.4 KB | |
| Confidential_Power control For AP228 Metadata only | Operational Description | PDF 642.6 KB | |
| Confidential_Professional installation Guide For AP228 Metadata only | Operational Description | PDF 106.6 KB | |
| Operational description _2 Metadata only | Operational Description | PDF 127.6 KB | |
| Operational description _3 Metadata only | Operational Description | PDF 97.7 KB | |
| Professional installation Guide Metadata only | Operational Description | PDF 118.4 KB | |
| U-NII Device Security v01r03 Metadata only | Operational Description | PDF 119.5 KB | |
| 1.AP-ANT-1B Metadata only | SDR Software/Security Inf | PDF 630.2 KB | |
| 10.ANT-3X3-D905 Metadata only | SDR Software/Security Inf | PDF 962.9 KB | |
| 11.ANT-3X3-D608 Metadata only | SDR Software/Security Inf | PDF 320.6 KB | |
| 12.ANT-3X3-2005 Metadata only | SDR Software/Security Inf | PDF 503.1 KB | |
| 13.ANT-3X3-5005 Metadata only | SDR Software/Security Inf | PDF 589.3 KB | |
| 14.ANT-3X3-5010 Metadata only | SDR Software/Security Inf | PDF 1.7 MB | |
| 14.ANT-3X3-5010 Metadata only | SDR Software/Security Inf | PDF 586.7 KB | |
| 15.ANT-3X3-5712 Metadata only | SDR Software/Security Inf | PDF 586.7 KB | |
| 15.ANT-3X3-5712 Metadata only | SDR Software/Security Inf | PDF 1.7 MB | |
| 16.ANT-2X2-2314 Metadata only | SDR Software/Security Inf | PDF 713.2 KB | |
| 17.ANT-2X2-5314 Metadata only | SDR Software/Security Inf | PDF 797.5 KB | |
| 18.ANT-2X2-2714 Metadata only | SDR Software/Security Inf | PDF 389 KB | |
| 19.AP-ANT-35A Metadata only | SDR Software/Security Inf | PDF 368.4 KB | |
| 2.AP-ANT-13B Metadata only | SDR Software/Security Inf | PDF 706.8 KB | |
| 20.AP-ANT-1W Metadata only | SDR Software/Security Inf | PDF 630.2 KB | |
| 21.ANT-3x3-D100 Metadata only | SDR Software/Security Inf | PDF 461.1 KB | |
| 3.AP-ANT-16 Metadata only | SDR Software/Security Inf | PDF 731 KB | |
| 4.AP-ANT-32 Metadata only | SDR Software/Security Inf | PDF 837.8 KB | |
| 5.AP-ANT-19 Metadata only | SDR Software/Security Inf | PDF 510 KB | |
| 6.AP-ANT-20 Metadata only | SDR Software/Security Inf | PDF 897.5 KB | |
| 7.AP-ANT-35 Metadata only | SDR Software/Security Inf | PDF 767.7 KB | |
| 8.AP-ANT-38 Metadata only | SDR Software/Security Inf | PDF 228.2 KB | |
| 9.AP-ANT-93 Metadata only | SDR Software/Security Inf | PDF 373.8 KB | |
| U-NII Device Security Metadata only | SDR Software/Security Inf | PDF 120.5 KB |
Application Information
| Application ID | 6w2ESTpmVOVzydfPnU6u5w== |
|---|---|
| Final Action Date | 2016-07-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026486175 |
| Model | APIN0228 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Access Point |
| Responsible Party | Phillip Carranco, Compliance Manager, phillip.carranco@hpe.com  , 650-236-9490 |
| Agent | Wakeyou Wakeyou Wakeyou, Intertek Testing Services Limited Shanghai, wade.zhang@intertek.com  , 86-21-61278448 |
| Technical Contact | Daniel Zhao, Intertek Testing Services Limited Shanghai, daniel.zhao@intertek.com , 86 21 61278448 |
| Test Firm | Jonny Jing, Intertek Testing Services Limited Shanghai, jonny.jing@intertek.com , 86-21-61278271 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class III Permissive Change. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 6w2ESTpmVOVzydfPnU6u5w== | 2016-07-22 | Class II permissive change or modification of presently authorized equipment |
| trKKaYZKR5Q9zucQHWZrnw== | 2015-03-10 | Original Equipment |
| g4dGsc2IP3vR6kZeOEcZAQ== | 2015-03-10 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application trKKaYZKR5Q9zucQHWZrnw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/10/2015 Application Dated: 02/12/2015 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0228 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 38 CC MO | 15E | 5745.0 - 5825.0 | 0.8 | ||
| 36 38 CC MO | 15E | 5180.0 - 5240.0 | 0.664 |
| Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application trKKaYZKR5Q9zucQHWZrnw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 03/10/2015 Application Dated: 02/12/2015 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0228 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 38 CC MO | 15E | 5745.0 - 5825.0 | 0.8 | ||
| 36 38 CC MO | 15E | 5180.0 - 5240.0 | 0.664 |
| Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/10/2015 Application Dated: 02/12/2015 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0228 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.948 |
| Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application g4dGsc2IP3vR6kZeOEcZAQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 03/10/2015 Application Dated: 02/12/2015 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0228 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.948 |
| Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/22/2016 Application Dated: 06/15/2016 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0228 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.194 | ||
| 36 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.204 | ||
| 36 38 CC MO | 15E | 5745.0 - 5825.0 | 0.8 | ||
| 36 38 CC MO | 15E | 5180.0 - 5240.0 | 0.664 |
| Class III Permissive Change. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 6w2ESTpmVOVzydfPnU6u5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/22/2016 Application Dated: 06/15/2016 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0228 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.194 | ||
| 36 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.204 | ||
| 36 38 CC MO | 15E | 5745.0 - 5825.0 | 0.8 | ||
| 36 38 CC MO | 15E | 5180.0 - 5240.0 | 0.664 |
| Class III Permissive Change. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |