FCC ID Q9DAPIN0304305
Wireless Access Point
by Hewlett Packard Enterprise Company
Grantee Code: Q9D Product Code: APIN0304305
Latest application date: 2017-08-30
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-08-30 |
| 2402-2480 MHz | Original Equipment | 2016-09-26 |
| 5180-5240 MHz | Original Equipment | 2016-09-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2017-03-25 | PDF 150.9 KB |
| User Manual Safety Guide | Users Manual | 2017-03-25 | PDF 699.9 KB |
| User Manuel | Users Manual | 2017-03-25 | PDF 150.9 KB |
| User Manuel Safety Guide | Users Manual | 2017-03-25 | PDF 699.9 KB |
| Internal Photo | Internal Photos | 2017-03-25 | PDF 5.1 MB |
| Internal Photos | Internal Photos | 2017-03-25 | PDF 5.1 MB |
| External Photo | External Photos | 2017-03-25 | PDF 1.2 MB |
| External Photos | External Photos | 2017-03-25 | PDF 1.2 MB |
| Label - Location | ID Label/Location Info | 2016-09-26 | PDF 87.3 KB |
| Label - Sample ap-304 | ID Label/Location Info | 2016-09-26 | PDF 283.5 KB |
| Label - Sample ap-305 | ID Label/Location Info | 2016-09-26 | PDF 287.9 KB |
| Label Sample | ID Label/Location Info | 2016-09-26 | PDF 283.5 KB |
| Label Sample 305 | ID Label/Location Info | 2016-09-26 | PDF 287.9 KB |
| Test Setup Photo NII B2-B3 | Test Setup Photos | 2018-01-02 | PDF 857.1 KB |
| Test Setup Photo NII DFS | Test Setup Photos | 2018-01-02 | PDF 173.3 KB |
| Test Setup DTS bt | Test Setup Photos | 2017-03-25 | PDF 796.2 KB |
| Test Setup DTS wlan | Test Setup Photos | 2017-03-25 | PDF 1 MB |
| Test Setup nii 5g-b1 | Test Setup Photos | 2017-03-25 | PDF 1.1 MB |
| Test Setup nii 5g-b4 | Test Setup Photos | 2017-03-25 | PDF 1.1 MB |
| Test Report NII B2-B3 Part 1 | Test Report | 2017-08-30 | PDF 5 MB |
| Test Report NII B2-B3 Part 2 | Test Report | 2017-08-30 | PDF 5.3 MB |
| Test Report NII B2-B3 Part 3 | Test Report | 2017-08-30 | PDF 5.1 MB |
| Test Report NII B2-B3 Part 4 | Test Report | 2017-08-30 | PDF 4.3 MB |
| Test Report NII DFS | Test Report | 2017-08-30 | PDF 5.2 MB |
| Test Report 5g-b1 | Test Report | 2016-09-26 | PDF 4.3 MB |
| Test Report 5g-b4 | Test Report | 2016-09-26 | PDF 4.1 MB |
| Test Report DTS bt | Test Report | 2016-09-26 | PDF 3.7 MB |
| Test Report DTS wlan-1 | Test Report | 2016-09-26 | PDF 5.7 MB |
| Test Report DTS wlan-2 | Test Report | 2016-09-26 | PDF 3.7 MB |
| Test Report rf exposure | RF Exposure Info | 2016-09-26 | PDF 329.8 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2017-08-30 | PDF 1.3 MB |
| Confidentiality Request Letter | Cover Letter(s) | 2017-08-30 | PDF 2.4 MB |
| POA | Cover Letter(s) | 2017-08-30 | PDF 53.5 KB |
| Confidentiality Request | Cover Letter(s) | 2016-09-26 | PDF 2.4 MB |
| POA | Cover Letter(s) | 2016-09-26 | PDF 2.4 MB |
| RF Exposure | RF Exposure Info | 2017-08-30 | PDF 534.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 145.7 KB | |
| Schematic Metadata only | Schematics | PDF 1.3 MB | |
| Operational Description Metadata only | Operational Description | PDF 366.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 338.5 KB | |
| Operational Description Antenna 13b Metadata only | Operational Description | PDF 701.9 KB | |
| Operational Description Antenna 16 Metadata only | Operational Description | PDF 725.4 KB | |
| Operational Description Antenna 19 Metadata only | Operational Description | PDF 510.5 KB | |
| Operational Description Antenna 1b Metadata only | Operational Description | PDF 629.6 KB | |
| Operational Description Antenna 20 Metadata only | Operational Description | PDF 897.6 KB | |
| Operational Description Antenna 25a Metadata only | Operational Description | PDF 368.1 KB | |
| Operational Description Antenna 28 Metadata only | Operational Description | PDF 228.1 KB | |
| Operational Description Antenna 35a Metadata only | Operational Description | PDF 368.6 KB | |
| Operational Description Antenna 38 Metadata only | Operational Description | PDF 230.1 KB | |
| Operational Description Non-SDR Metadata only | Operational Description | PDF 400.4 KB | |
| Operational Description Request for Superseding Metadata only | Operational Description | PDF 208.2 KB | |
| Operational Description SW Security Metadata only | Operational Description | PDF 276.2 KB | |
| Operational Description SW Security for NII Metadata only | SDR Software/Security Inf | PDF 276.2 KB | |
| Operational Description Secure Mobility System SDR Metadata only | Operational Description | PDF 163.1 KB | |
| Operational Description Software Security Metadata only | SDR Software/Security Inf | PDF 276.2 KB | |
| Request for Superseding Metadata only | SDR Software/Security Inf | PDF 208.2 KB | |
| SDR File Metadata only | SDR Software/Security Inf | PDF 163.1 KB | |
| Part list Metadata only | Parts List/Tune Up Info | PDF 142.7 KB | |
| Part list 304 Metadata only | Parts List/Tune Up Info | PDF 142.7 KB | |
| Part list 305 Metadata only | Parts List/Tune Up Info | PDF 159.2 KB | |
| Partlist ap 305 Metadata only | Parts List/Tune Up Info | PDF 159.2 KB | |
| Tune Up Procedure Metadata only | Parts List/Tune Up Info | PDF 73.7 KB | |
| Tune up Pro Metadata only | Parts List/Tune Up Info | PDF 110.4 KB |
Application Information
| Application ID | yDJ32RFQrJAeNJtBPv1itw== |
|---|---|
| Final Action Date | 2017-08-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026486175 |
| Model | APIN0304305 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Access Point |
| Responsible Party | Phillip Carranco, Compliance Manager, phillip.carranco@hpe.com |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw |
| TCB Email | tei@timcoengr.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/02/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: This class permissive change adds UNII-2a and UNII-2c bands with radar detection capability. This AP requires a master/slave Controller as part of the Aruba Networks Secure Mobility System. The controller is a country-specific unit that contains the country code for the software and access point system. Approval is subject to the following conditions: (1) The AP cannot initiate a transmission without authentication form a Aruba controller, (2) the Aruba controllers are fixed by SKU to US Regulatory Zone. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yDJ32RFQrJAeNJtBPv1itw== | 2017-08-30 | Class II permissive change or modification of presently authorized equipment |
| yl/jCbTDf9eBZIqWRwom7Q== | 2016-09-26 | Original Equipment |
| mFjpWdZvm0MjXeza3rRY/w== | 2016-09-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application yl/jCbTDf9eBZIqWRwom7Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/26/2016 Application Dated: 09/26/2016 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0304305 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0011 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.7396 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yl/jCbTDf9eBZIqWRwom7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 09/26/2016 Application Dated: 09/26/2016 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0304305 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0011 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.7396 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/30/2017 Application Dated: 07/06/2017 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0304305 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.1871 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.2089 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.2046 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.2094 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: This class permissive change adds UNII-2a and UNII-2c bands with radar detection capability. This AP requires a master/slave Controller as part of the Aruba Networks Secure Mobility System. The controller is a country-specific unit that contains the country code for the software and access point system. Approval is subject to the following conditions: (1) The AP cannot initiate a transmission without authentication form a Aruba controller, (2) the Aruba controllers are fixed by SKU to US Regulatory Zone. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yDJ32RFQrJAeNJtBPv1itw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 08/30/2017 Application Dated: 07/06/2017 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0304305 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.1871 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.2089 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.2046 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.2094 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: This class permissive change adds UNII-2a and UNII-2c bands with radar detection capability. This AP requires a master/slave Controller as part of the Aruba Networks Secure Mobility System. The controller is a country-specific unit that contains the country code for the software and access point system. Approval is subject to the following conditions: (1) The AP cannot initiate a transmission without authentication form a Aruba controller, (2) the Aruba controllers are fixed by SKU to US Regulatory Zone. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/26/2016 Application Dated: 09/26/2016 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0304305 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.1871 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.2089 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application mFjpWdZvm0MjXeza3rRY/w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 09/26/2016 Application Dated: 09/26/2016 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0304305 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.1871 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.2089 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |