FCC ID Q9DAPIN0324325

Wireless Access Point

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: APIN0324325
Latest application date: 2015-10-13

FCC ID Device Details

FCC IDQ9DAPIN0324325
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeAPIN0324325
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com
Equipment ClassWireless Access Point
Test FirmMiCOM Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2015-10-13
2402-2480 MHzOriginal Equipment2015-07-21
5180-5240 MHzOriginal Equipment2015-07-21

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2016-01-13PDF 1.4 MB
ManualUsers Manual2015-10-13PDF 1.4 MB
Regulatory and safety ManualUsers Manual2015-07-21PDF 761.6 KB
User manualUsers Manual2015-07-21PDF 1.4 MB
Internal PhotosInternal Photos2016-01-13PDF 1.2 MB
Internal PhotosInternal Photos2016-01-13PDF 2.7 MB
IntInternal Photos2015-10-13PDF 1.1 MB
ExtExternal Photos2015-10-13PDF 1.1 MB
External PhotosExternal Photos2015-07-21PDF 232.3 KB
Label 324ID Label/Location Info2015-10-13PDF 646.7 KB
Label 325ID Label/Location Info2015-10-13PDF 609.9 KB
LabelID Label/Location Info2015-07-21PDF 646.7 KB
LabelID Label/Location Info2015-07-21PDF 609.9 KB
Label LocationID Label/Location Info2015-07-21PDF 115.5 KB
SetupTest Setup Photos2015-10-13PDF 396.1 KB
Setup PhotosTest Setup Photos2015-07-21PDF 568.2 KB
DFSTest Report2015-10-13PDF 3.9 MB
NII Part 1Test Report2015-10-13PDF 5.3 MB
NII Part 2Test Report2015-10-13PDF 5.4 MB
Test Report BLETest Report2015-07-21PDF 2.3 MB
Test ReportTest Report2015-07-21PDF 5.2 MB
Test Report UNII Band 3Test Report2015-07-21PDF 4.1 MB
Test Report UNII band 1Test Report2015-07-21PDF 4.2 MB
LOACover Letter(s)2015-10-13PDF 149.3 KB
PCIII RequestCover Letter(s)2015-10-13PDF 122.8 KB
Confidentiality RequestCover Letter(s)2015-07-21PDF 118.9 KB
Cover letter SDRCover Letter(s)2015-07-21PDF 210 KB
Cover letter confidentilaty requestCover Letter(s)2015-07-21PDF 118.9 KB
Cover letter for SDRCover Letter(s)2015-07-21PDF 210 KB
Letter of agencyCover Letter(s)2015-07-21PDF 116.2 KB
RF Exposure ExhibitRF Exposure Info2015-07-21PDF 138.2 KB
2.4 GHz Block Diagram Metadata onlyBlock DiagramPDF 87.1 KB
5 GHz Block diagram Metadata onlyBlock DiagramPDF 84.6 KB
Block Metadata onlyBlock DiagramPDF 84.6 KB
Device Block diagram Metadata onlyBlock DiagramPDF 295.1 KB
BOM 5GHz 0324 Metadata onlySchematicsPDF 58.5 KB
BOM AP0324 5Ghz Metadata onlySchematicsPDF 58.5 KB
BOM Main Board Metadata onlySchematicsPDF 69.4 KB
BOM main Board Metadata onlySchematicsPDF 69.4 KB
BOM 5GHZ 0325 Metadata onlySchematicsPDF 58.1 KB
BOM AP0324 2.4 GHz Metadata onlySchematicsPDF 5.4 KB
BOM AP0325 2.4GHz Metadata onlySchematicsPDF 60.8 KB
BOM AP0325 5GHz Metadata onlySchematicsPDF 58.1 KB
Main Board Metadata onlySchematicsPDF 1.2 MB
Main Board Metadata onlySchematicsPDF 2.9 MB
Schama Metadata onlySchematicsPDF 231.6 KB
Schema Metadata onlySchematicsPDF 1.2 MB
Schematics 5GHz 0325 Metadata onlySchematicsPDF 787 KB
Schematics 2.4 GHz Board Metadata onlySchematicsPDF 177 B
Schematics 5GHz Metadata onlySchematicsPDF 787 KB
Schematics 5Ghz 0324 Metadata onlySchematicsPDF 787 KB
schematics 5Ghz 0325 Metadata onlySchematicsPDF 787 KB
ANT-13B Metadata onlyOperational DescriptionPDF 706.8 KB
ANT-19 Metadata onlyOperational DescriptionPDF 510 KB
ANT-1W Metadata onlyOperational DescriptionPDF 396.7 KB
ANT-20 Metadata onlyOperational DescriptionPDF 897.5 KB
ANT-40 Metadata onlyOperational DescriptionPDF 182.7 KB
Antenna Test results ANT 48 Metadata onlyOperational DescriptionPDF 955.8 KB
Antenna 13B Metadata onlyOperational DescriptionPDF 706.8 KB
Antenna 19 Metadata onlyOperational DescriptionPDF 510 KB
Antenna 1W Metadata onlyOperational DescriptionPDF 396.7 KB
Antenna 20 Metadata onlyOperational DescriptionPDF 897.5 KB
Antenna 40 Metadata onlyOperational DescriptionPDF 182.7 KB
Antenna test Metadata onlyOperational DescriptionPDF 955.8 KB
Opeartional Description Metadata onlyOperational DescriptionPDF 594.1 KB
Operational description Metadata onlyOperational DescriptionPDF 594.1 KB
Ops Metadata onlyOperational DescriptionPDF 594.1 KB
PBA for SDR Metadata onlySDR Software/Security InfPDF 42.1 KB
SDR document Metadata onlySDR Software/Security InfPDF 149.9 KB
SDR enquiry number Metadata onlySDR Software/Security InfPDF 77.9 KB
SDR Description Metadata onlySDR Software/Security InfPDF 164.2 KB
SDR enquiry Metadata onlySDR Software/Security InfPDF 77.9 KB
UNII Device Security Metadata onlySDR Software/Security InfPDF 111.2 KB
UNII Security Document Metadata onlySDR Software/Security InfPDF 111.2 KB
Parts Metadata onlyParts List/Tune Up InfoPDF 69.4 KB

Application Information

Application IDzXOGdAU+57WSkcn/fRvCJQ==
Final Action Date2015-10-13
Application PurposeClass III permissive change to software defined radio
Applicant FRN0026486175
ModelAPIN0324325
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Access Point
Responsible PartyPhillip Carranco, Compliance Manager, phillip.carranco@hpe.com , 650-236-9490
Technical ContactGordon Hurst, MiCOM Labs, certification@micomlabs.com , (925)4620304
Test FirmGordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsSoftware Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
zXOGdAU+57WSkcn/fRvCJQ==2015-10-13Class III permissive change to software defined radio
mRMmsXSf7UTckn7g+mrsqQ==2015-07-21Original Equipment
29/bihokGuk9k3DAHqdu/Q==2015-07-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002415CCC
2412-2462 MHz0.27515C36, CC, MO
2422-2452 MHz0.19115C36, CC, MO
5180-5240 MHz0.29915E36, 38, CC, MO
5190-5230 MHz0.06515E36, 38, CC, MO
5210 MHz0.05315E36, 38, CC, MO
5260-5320 MHz0.08915E36, 38, CC, MO
5270-5310 MHz0.15815E36, 38, CC, MO
5290 MHz0.16415E36, 38, CC, MO
5500-5720 MHz0.08815E36, 38, CC, MO
5510-5710 MHz0.15515E36, 38, CC, MO
5530-5690 MHz0.16715E36, 38, CC, MO
5745-5825 MHz0.1815E36, 38, CC, MO
5755-5795 MHz0.19215E36, 38, CC, MO
5755-5775 MHz0.15715E36, 38, CC, MO
5755 MHz0.15715E36, 38, CC, MO

Grants

TCB Grant - Application zXOGdAU+57WSkcn/fRvCJQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/13/2015

Application Dated: 08/03/2015
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0324325
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 38 CC MO 15E 5180.0  -  5240.0 0.299  
36 38 CC MO 15E 5190.0  -  5230.0 0.065  
36 38 CC MO 15E 5210.0  -  5210.0 0.053  
36 38 CC MO 15E 5745.0  -  5825.0 0.18  
36 38 CC MO 15E 5755.0  -  5795.0 0.192  
36 38 CC MO 15E 5755.0  -  5755.0 0.157  
36 38 CC MO 15E 5260.0  -  5320.0 0.089  
36 38 CC MO 15E 5290.0  -  5290.0 0.164  
36 38 CC MO 15E 5270.0  -  5310.0 0.158  
36 38 CC MO 15E 5500.0  -  5720.0 0.088  
36 38 CC MO 15E 5530.0  -  5690.0 0.167  
36 38 CC MO 15E 5510.0  -  5710.0 0.155  

Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application zXOGdAU+57WSkcn/fRvCJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 10/13/2015

Application Dated: 08/03/2015
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0324325
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 38 CC MO 15E 5180.0  -  5240.0 0.299  
36 38 CC MO 15E 5190.0  -  5230.0 0.065  
36 38 CC MO 15E 5210.0  -  5210.0 0.053  
36 38 CC MO 15E 5745.0  -  5825.0 0.18  
36 38 CC MO 15E 5755.0  -  5795.0 0.192  
36 38 CC MO 15E 5755.0  -  5755.0 0.157  
36 38 CC MO 15E 5260.0  -  5320.0 0.089  
36 38 CC MO 15E 5290.0  -  5290.0 0.164  
36 38 CC MO 15E 5270.0  -  5310.0 0.158  
36 38 CC MO 15E 5500.0  -  5720.0 0.088  
36 38 CC MO 15E 5530.0  -  5690.0 0.167  
36 38 CC MO 15E 5510.0  -  5710.0 0.155  

Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application mRMmsXSf7UTckn7g+mrsqQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 07/21/2015

Application Dated: 07/16/2015
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0324325
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  
36 CC MO 15C 2412.0  -  2462.0 0.275  
36 CC MO 15C 2422.0  -  2452.0 0.191  

Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

This device has a 20 MHz and 40 MHz bandwidth mode.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application mRMmsXSf7UTckn7g+mrsqQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 07/21/2015

Application Dated: 07/16/2015
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0324325
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  
36 CC MO 15C 2412.0  -  2462.0 0.275  
36 CC MO 15C 2422.0  -  2452.0 0.191  

Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

This device has a 20 MHz and 40 MHz bandwidth mode.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 29/bihokGuk9k3DAHqdu/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 07/21/2015

Application Dated: 07/16/2015
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0324325
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 38 CC MO 15E 5180.0  -  5240.0 0.299  
36 38 CC MO 15E 5190.0  -  5230.0 0.065  
36 38 CC MO 15E 5210.0  -  5210.0 0.053  
36 38 CC MO 15E 5745.0  -  5825.0 0.18  
36 38 CC MO 15E 5755.0  -  5795.0 0.192  
36 38 CC MO 15E 5755.0  -  5775.0 0.157  

Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 29/bihokGuk9k3DAHqdu/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 07/21/2015

Application Dated: 07/16/2015
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPIN0324325
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 38 CC MO 15E 5180.0  -  5240.0 0.299  
36 38 CC MO 15E 5190.0  -  5230.0 0.065  
36 38 CC MO 15E 5210.0  -  5210.0 0.053  
36 38 CC MO 15E 5745.0  -  5825.0 0.18  
36 38 CC MO 15E 5755.0  -  5795.0 0.192  
36 38 CC MO 15E 5755.0  -  5775.0 0.157  

Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: