FCC ID Q9DAPIN0634
ACCESS POINT
by Hewlett Packard Enterprise Company
Grantee Code: Q9D Product Code: APIN0634
Latest application date: 2024-09-11
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5955-6415 MHz | Class III permissive change to software defined radio | 2024-09-11 |
| 5180-5240 MHz | Original Equipment | 2023-11-15 |
| 2412-2462 MHz | Original Equipment | 2023-11-15 |
Exhibits
Application Information
| Application ID | QT5gqO0gFuDuIPkXtNxOBg== |
|---|---|
| Final Action Date | 2024-09-11 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0026486175 |
| Model | APIN0634 |
| Frequency Range | 5955-6415 MHz |
| Equipment Class | 6SD - 15E 6 GHz Standard Power Access Point |
| Device Description | ACCESS POINT |
| Responsible Party | Mark Hill, Principal Engineer, mhill@hpe.com  , 650-236-7322 |
| Technical Contact | Jame Yuan, MRT Technology Suzhou Co., Ltd, jameyuan@mrt-cert.com  , +86-512-6630 8358 |
| Test Firm | Mr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , 8651266308358 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/10/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class III Permissive Change to add UNII-5 and 7 Bands for 6GHz Standard Power Access Point operation. Software Defined Radio Device. Output power listed is EiRP. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz, and 160 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QT5gqO0gFuDuIPkXtNxOBg== | 2024-09-11 | Class III permissive change to software defined radio |
| U1+o3S/9oyTLflfL870OpQ== | 2023-11-15 | Original Equipment |
| 5MS0r2WYWLMNnyEK+hJM/g== | 2023-11-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application U1+o3S/9oyTLflfL870OpQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/15/2023 Application Dated: 11/01/2023 |
| Hewlett Packard Enterprise Company |
| 6280 America Center Drive |
| San Jose, CA 95002 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0634 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.149 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.149 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 |
| Software Defined Radio Device. Power listed is conducted power. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, and 40 MHz, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application U1+o3S/9oyTLflfL870OpQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 United States |
Date of Grant: 11/15/2023 Application Dated: 11/01/2023 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0634 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.149 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.149 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 |
| Software Defined Radio Device. Power listed is conducted power. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, and 40 MHz, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/11/2024 Application Dated: 08/13/2024 |
| Hewlett Packard Enterprise Company |
| 6280 America Center Drive |
| San Jose, CA 95002 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0634 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | 15E 6 GHz Standard Power Access Point |
| Notes: | ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EP MO | 15E | 5955.0 - 6415.0 | 0.378 | ||
| EP MO | 15E | 6535.0 - 6855.0 | 0.392 |
| Class III Permissive Change to add UNII-5 and 7 Bands for 6GHz Standard Power Access Point operation. Software Defined Radio Device. Output power listed is EiRP. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz, and 160 MHz bandwidth modes. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application QT5gqO0gFuDuIPkXtNxOBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 United States |
Date of Grant: 09/11/2024 Application Dated: 08/13/2024 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0634 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | 15E 6 GHz Standard Power Access Point |
| Notes: | ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EP MO | 15E | 5955.0 - 6415.0 | 0.378 | ||
| EP MO | 15E | 6535.0 - 6855.0 | 0.392 |
| Class III Permissive Change to add UNII-5 and 7 Bands for 6GHz Standard Power Access Point operation. Software Defined Radio Device. Output power listed is EiRP. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz, and 160 MHz bandwidth modes. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/15/2023 Application Dated: 11/01/2023 |
| Hewlett Packard Enterprise Company |
| 6280 America Center Drive |
| San Jose, CA 95002 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0634 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.155 |
| Software Defined Radio Device. Power listed is conducted power. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, and 40 MHz, bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5MS0r2WYWLMNnyEK+hJM/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 United States |
Date of Grant: 11/15/2023 Application Dated: 11/01/2023 |
| Attention: Mark Hill , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0634 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.155 |
| Software Defined Radio Device. Power listed is conducted power. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, and 40 MHz, bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |