FCC ID Q9DAPIN0635
ACCESS POINT
by Hewlett Packard Enterprise Company
Grantee Code: Q9D Product Code: APIN0635
Latest application date: 2022-09-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5845-5885 MHz | Class III permissive change to software defined radio | 2022-09-29 |
| 5180-5240 MHz | Original Equipment | 2021-07-29 |
| 5955-6415 MHz | Original Equipment | 2021-07-29 |
| 2402-2480 MHz | Original Equipment | 2021-07-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| AP-635_Install_Guide | Users Manual | 2022-01-25 | PDF 1.7 MB |
| AP-635_User Manual | Users Manual | 2022-01-25 | PDF 233.8 KB |
| 2101TW0003-EUT Internal Photo | Internal Photos | 2022-01-25 | PDF 1.6 MB |
| 2101TW0003-EUT External Photo | External Photos | 2022-01-25 | PDF 617.6 KB |
| AP-635_Label and Label Location | ID Label/Location Info | 2021-07-29 | PDF 447.1 KB |
| Test Setup Photos_20220903_v1 - AP-635_Test Setup Photo | Test Setup Photos | 2023-03-28 | PDF 356.9 KB |
| AP-635_Test Setup Photo | Test Setup Photos | 2022-01-25 | PDF 795.4 KB |
| Test Report_20220903_v1 - 2201RSU050-U2-FCC RF Exposure Report | RF Exposure Info | 2022-09-29 | PDF 270 KB |
| Test Report_20220918_v1 - 2201RSU050-U1-FCC NII Test Report [5.9GHz]_Rev4_Part1 | Test Report | 2022-09-29 | PDF 4.5 MB |
| Test Report_20220918_v1 - 2201RSU050-U1-FCC NII Test Report [5.9GHz]_Rev4_Part2 | Test Report | 2022-09-29 | PDF 3.5 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Part1 Metadata only | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Part2 Metadata only | Test Report | 2021-07-29 | PDF 4.7 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Part3 Metadata only | Test Report | 2021-07-29 | PDF 5 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Part4 Metadata only | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Part5 Metadata only | Test Report | 2021-07-29 | PDF 4 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev2_Part1 Metadata only | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev2_Part2 Metadata only | Test Report | 2021-07-29 | PDF 4.7 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev2_Part3 Metadata only | Test Report | 2021-07-29 | PDF 5 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev2_Part4 Metadata only | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev2_Part5 Metadata only | Test Report | 2021-07-29 | PDF 4 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev3_Part1 | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev3_Part2 | Test Report | 2021-07-29 | PDF 4.7 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev3_Part3 | Test Report | 2021-07-29 | PDF 5 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev3_Part4 | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101RSU034-U2-FCC 6ID Test Report (Wi-Fi 6E)_Rev3_Part5 | Test Report | 2021-07-29 | PDF 4 MB |
| 2101RSU034-U2-FCC 6ID Test Report [Wi-Fi 6E]_Part1 Metadata only | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101RSU034-U2-FCC 6ID Test Report [Wi-Fi 6E]_Part2 Metadata only | Test Report | 2021-07-29 | PDF 4.7 MB |
| 2101RSU034-U2-FCC 6ID Test Report [Wi-Fi 6E]_Part3 Metadata only | Test Report | 2021-07-29 | PDF 5 MB |
| 2101RSU034-U2-FCC 6ID Test Report [Wi-Fi 6E]_Part4 Metadata only | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101RSU034-U2-FCC 6ID Test Report [Wi-Fi 6E]_Part5 Metadata only | Test Report | 2021-07-29 | PDF 4 MB |
| 2101TW0003-U1-FCC BLE Test Report [Bluetooth-LE] | Test Report | 2021-07-29 | PDF 4.3 MB |
| 2101TW0003-U2-FCC DTS Test Report [ZigBee] | Test Report | 2021-07-29 | PDF 4.8 MB |
| 2101TW0003-U3-FCC DTS Test Report [Wi-Fi 2.4G]_Part1 | Test Report | 2021-07-29 | PDF 4.8 MB |
| 2101TW0003-U3-FCC DTS Test Report [Wi-Fi 2.4G]_Part2 | Test Report | 2021-07-29 | PDF 5 MB |
| 2101TW0003-U3-FCC DTS Test Report [Wi-Fi 2.4G]_Part3 | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101TW0003-U4-FCC NII Test Report [Wi-Fi 5G]_Part1 | Test Report | 2021-07-29 | PDF 4.5 MB |
| 2101TW0003-U4-FCC NII Test Report [Wi-Fi 5G]_Part2 | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101TW0003-U4-FCC NII Test Report [Wi-Fi 5G]_Part3 | Test Report | 2021-07-29 | PDF 4.9 MB |
| 2101TW0003-U4-FCC NII Test Report [Wi-Fi 5G]_Part4 | Test Report | 2021-07-29 | PDF 4.6 MB |
| 2101TW0003-U4-FCC NII Test Report [Wi-Fi 5G]_Part5 | Test Report | 2021-07-29 | PDF 5 MB |
| 2101TW0003-U4-FCC NII Test Report [Wi-Fi 5G]_Part6 | Test Report | 2021-07-29 | PDF 1.7 MB |
| 2101TW0003-U5-FCC DFS Test Report [Wi-Fi 5G] | Test Report | 2021-07-29 | PDF 3.4 MB |
| APIN0635_FCC 15B Attestation | Cover Letter(s) | 2021-07-29 | PDF 123.4 KB |
| APIN0635_FCC 6GHz Declaration | Attestation Statements | 2021-07-29 | PDF 70.7 KB |
| APIN0635_ZigBee Duty Cycle Attestation | Cover Letter(s) | 2021-07-29 | PDF 154.2 KB |
| Cover Letters_20220903_v1 - AP-635_FCC Agent Auth Letter | Cover Letter(s) | 2022-09-29 | PDF 218 KB |
| Cover Letters_20220903_v1 - AP-635_FCC C3PC Statement Letter | Cover Letter(s) | 2022-09-29 | PDF 201.9 KB |
| Cover Letters_20220903_v1 - AP-635_FCC Confidentiality Request Letter [Long and | Cover Letter(s) | 2022-09-29 | PDF 215.3 KB |
| APIN0635_FCC 6GHz Declaration Metadata only | Cover Letter(s) | 2021-07-29 | PDF 70.7 KB |
| APIN0635_FCC Agent Auth Letter | Cover Letter(s) | 2021-07-29 | PDF 88.7 KB |
| APIN0635_FCC Confidentiality Request Letter [Long and Short Term] | Cover Letter(s) | 2021-07-29 | PDF 143.7 KB |
| APIN0635_SDR_Letter | Cover Letter(s) | 2021-07-29 | PDF 78.7 KB |
| 2101TW0003-U6-FCC RF Exposure Report | RF Exposure Info | 2021-07-29 | PDF 615.3 KB |
| AP-635_block diagram Metadata only | Block Diagram | PDF 568.5 KB | |
| Block Diagrams_20220903_v1 - AP-635_Block diagram_r2 Metadata only | Block Diagram | PDF 264.8 KB | |
| AP-635_Schematic Metadata only | Schematics | PDF 2.9 MB | |
| 291074 D04 UN5GHZ Checklist V01 Metadata only | Operational Description | PDF 197.1 KB | |
| AP-635_Theory of Operation_r3 Metadata only | Operational Description | PDF 385.8 KB | |
| Antspec_Aruba AP635 Passive Measurement Report Metadata only | Operational Description | PDF 2.8 MB | |
| Operational Description_20220909_v1 - AP635_Theory of Operation_r5 Metadata only | Operational Description | PDF 629.3 KB | |
| AP-635_594280 D02 U-NII Device Security v01r03_sofware_r1 Metadata only | SDR Software/Security Inf | PDF 135.3 KB | |
| APIN0635_FCC SDR Security Description Metadata only | SDR Software/Security Inf | PDF 185.1 KB |
Application Information
| Application ID | adxPrwEYC/5u05hobz2muw== |
|---|---|
| Final Action Date | 2022-09-29 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0026486175 |
| Model | APIN0635 |
| Frequency Range | 5845-5885 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | ACCESS POINT |
| Responsible Party | Phillip Carranco, Compliance Manager, phillip.carranco@hpe.com  , 650-236-9490 |
| Technical Contact | jame yuan, MRT Technology Suzhou Co., Ltd, jameyuan@mrt-cert.com  , 18013136278 |
| Test Firm | Mr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/28/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class III Permissive Change to add NII-4 band. Output power listed is conducted for frequencies below 5850 MHz and EIRP for frequencies above 5850MHz. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, and 80MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| adxPrwEYC/5u05hobz2muw== | 2022-09-29 | Class III permissive change to software defined radio |
| ZAAS9k1+bRzYMH8XMWJvOQ== | 2021-07-29 | Original Equipment |
| TiAd392/rRQwyvvQR+LF4g== | 2021-07-29 | Original Equipment |
| 39NIfaOtlzvFMwX6HDIDXA== | 2021-07-29 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0046 | 15C | CC |
| 2405-2480 MHz | 0.0038 | 15C | CC |
| 2412-2462 MHz | 0.156 | 15C | CC, MO |
| 5180-5240 MHz | 0.158 | 15E | CC, MO |
| 5260-5320 MHz | 0.117 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.125 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.14 | 15E | CC, MO |
| 5845-5885 MHz | 0.4 | 15E | CC, EP, MO |
| 5955-6415 MHz | 0.265 | 15E | CC, EP, MO |
| 6435-6515 MHz | 0.281 | 15E | CC, EP, MO |
| 6535-6875 MHz | 0.272 | 15E | CC, EP, MO |
| 6895-7095 MHz | 0.279 | 15E | CC, EP, MO |
Grants
TCB Grant - Application ZAAS9k1+bRzYMH8XMWJvOQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/29/2021 Application Dated: 06/21/2021 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0635 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.158 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.117 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.125 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.14 |
| Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ZAAS9k1+bRzYMH8XMWJvOQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/29/2021 Application Dated: 06/21/2021 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0635 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.158 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.117 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.125 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.14 |
| Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/29/2021 Application Dated: 06/21/2021 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0635 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.265 | ||
| CC EP MO | 15E | 6435.0 - 6515.0 | 0.281 | ||
| CC EP MO | 15E | 6535.0 - 6875.0 | 0.272 | ||
| CC EP MO | 15E | 6895.0 - 7095.0 | 0.279 |
| Software Defined Radio Device. Power listed is EIRP. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio Device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TiAd392/rRQwyvvQR+LF4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/29/2021 Application Dated: 06/21/2021 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0635 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.265 | ||
| CC EP MO | 15E | 6435.0 - 6515.0 | 0.281 | ||
| CC EP MO | 15E | 6535.0 - 6875.0 | 0.272 | ||
| CC EP MO | 15E | 6895.0 - 7095.0 | 0.279 |
| Software Defined Radio Device. Power listed is EIRP. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio Device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/29/2022 Application Dated: 09/19/2022 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0635 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.158 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.117 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.125 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.14 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.4 |
| Class III Permissive Change to add NII-4 band. Output power listed is conducted for frequencies below 5850 MHz and EIRP for frequencies above 5850MHz. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application adxPrwEYC/5u05hobz2muw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 09/29/2022 Application Dated: 09/19/2022 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0635 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.158 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.117 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.125 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.14 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.4 |
| Class III Permissive Change to add NII-4 band. Output power listed is conducted for frequencies below 5850 MHz and EIRP for frequencies above 5850MHz. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/29/2021 Application Dated: 06/21/2021 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0635 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0046 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.0038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.156 |
| Software Defined Radio Device. Power listed is peak conducted power for BT and Zigbee and maximum combined output average for WIFI 2.4GHz. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, and 40 MHz, bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 39NIfaOtlzvFMwX6HDIDXA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/29/2021 Application Dated: 06/21/2021 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPIN0635 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0046 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.0038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.156 |
| Software Defined Radio Device. Power listed is peak conducted power for BT and Zigbee and maximum combined output average for WIFI 2.4GHz. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. Professional or OEM installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, and 40 MHz, bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |