FCC ID Q9DAPINH103
Wireless Access Point (APINH103)
by Hewlett Packard Enterprise Company
Grantee Code: Q9D Product Code: APINH103
Latest application date: 2016-07-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class III permissive change to software defined radio | 2016-07-20 |
| 5180-5240 MHz | Class III permissive change to software defined radio | 2016-06-06 |
| 5180-5240 MHz | Original Equipment | 2014-07-14 |
| 2412-2462 MHz | Original Equipment | 2014-07-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual_1 | Users Manual | 2016-07-20 | PDF 2.6 MB |
| 5.User manual | Users Manual | 2014-07-14 | PDF 1.2 MB |
| Pages from ArubaOS 6.4 User Guide | Users Manual | 2014-07-14 | PDF 94.1 KB |
| 8.Internal picture | Internal Photos | 2014-07-14 | PDF 896.5 KB |
| External picture | External Photos | 2016-07-20 | PDF 227.2 KB |
| 9.External picture | External Photos | 2014-07-14 | PDF 227.2 KB |
| 11. Label | ID Label/Location Info | 2014-07-14 | PDF 437.5 KB |
| Test Setup | Test Setup Photos | 2016-07-20 | PDF 412 KB |
| 10.Test Setup rev1 | Test Setup Photos | 2014-07-14 | PDF 689.8 KB |
| FCC Report | Test Report | 2016-07-20 | PDF 3.5 MB |
| Report_DFS | Test Report | 2016-07-20 | PDF 2.9 MB |
| Original DTS report_1 | Test Report | 2016-06-06 | PDF 3.8 MB |
| Original DTS report_2 | Test Report | 2016-06-06 | PDF 4.2 MB |
| report_15.247_R01_part 1 | Test Report | 2014-07-14 | PDF 3.8 MB |
| report_15.247_R01_part 2 | Test Report | 2014-07-14 | PDF 4.2 MB |
| report_15.407_R01 | Test Report | 2014-07-14 | PDF 1.2 MB |
| report_15B_R01 | Test Report | 2014-07-14 | PDF 817.9 KB |
| 25.Security Metadata only | SDR Software/Security Inf | 2014-07-14 | PDF 139.5 KB |
| Confidentiality | Cover Letter(s) | 2016-07-20 | PDF 2.3 MB |
| FCC Class III Permissive Change Declaration | Cover Letter(s) | 2016-07-20 | PDF 34.8 KB |
| FCC Declaration-Straddle 5725MHz | Cover Letter(s) | 2016-07-20 | PDF 29.6 KB |
| FCC agent | Cover Letter(s) | 2016-07-20 | PDF 1.3 MB |
| Security for sofware | Cover Letter(s) | 2016-07-20 | PDF 69 KB |
| FCC Class III Permissive Change Declaration | Cover Letter(s) | 2016-06-06 | PDF 34.4 KB |
| Sofware Security description Metadata only | Cover Letter(s) | 2016-06-06 | PDF 70.8 KB |
| 1.Confidentiality | Cover Letter(s) | 2014-07-14 | PDF 779.1 KB |
| 2.FCC agency | Cover Letter(s) | 2014-07-14 | PDF 396 KB |
| 22.FCC_declaration | Cover Letter(s) | 2014-07-14 | PDF 322.8 KB |
| FCC MPE Report | RF Exposure Info | 2016-07-20 | PDF 68.6 KB |
| 14. Report_MPE | RF Exposure Info | 2014-07-14 | PDF 21.5 KB |
| Confidential_6.BlockDiagram rev1 Metadata only | Block Diagram | PDF 176.4 KB | |
| Confidential_4.Schematics rev1 Metadata only | Schematics | PDF 497.3 KB | |
| 23.Antenna 1 Spec Metadata only | Operational Description | PDF 942 KB | |
| 24.Antenna 2 Spec Metadata only | Operational Description | PDF 842.3 KB | |
| Confidential_7.Operational description Metadata only | Operational Description | PDF 1.5 MB | |
| Confidential_Operational description_1 Metadata only | Operational Description | PDF 2.5 MB | |
| PAG 341532 Metadata only | Operational Description | PDF 191.8 KB |
Application Information
| Application ID | EksZM08nVqbsiDhZ2s9CuQ== |
|---|---|
| Final Action Date | 2016-07-20 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0026486175 |
| Model | APINH103 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Access Point (APINH103) |
| Responsible Party | Phillip Carranco, Compliance Manager, phillip.carranco@hpe.com  , 650-236-9490 |
| Technical Contact | Daniel zhao, Intertek Testing Services Limited Shanghai, daniel.zhao@intertek.com  , 86 21 61278269 |
| Test Firm | Jonny Jing, Intertek Testing Services Limited Shanghai, jonny.jing@intertek.com , 86-21-61278271 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| EksZM08nVqbsiDhZ2s9CuQ== | 2016-07-20 | Class III permissive change to software defined radio |
| 49YYWMjKWDPDSYvDc+qMog== | 2016-06-06 | Class III permissive change to software defined radio |
| siXXjX091XLefvLyeCOvGQ== | 2014-07-14 | Original Equipment |
| UDKqSqGDxR9tuGsA+UqsMg== | 2014-07-14 | Original Equipment |
| R3qmnd9lcvwWMr2RsOExfw== | 2014-07-14 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2412-2462 MHz | 0.747 | 15C | CC, MO |
| 5180-5240 MHz | 0.048 | 15E | 38, CC, MO |
| 5180-5240 MHz | 0.072 | 15E | 38, CC, MO |
| 5180-5240 MHz | 0.0480000 | 15E | CC, MO |
| 5260-5320 MHz | 0.177 | 15E | 38, CC, MO, ND |
| 5500-5720 MHz | 0.137 | 15E | 38, CC, MO, ND |
| 5745-5825 MHz | 0.438 | 15E | 38, 49, CC, MO |
| 5745-5825 MHz | 0.438 | 15C | CC, MO |
| 5745-5825 MHz | 0.125 | 15E | 38, CC, MO |
Grants
TCB Grant - Application UDKqSqGDxR9tuGsA+UqsMg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/14/2014 Application Dated: 07/07/2014 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application UDKqSqGDxR9tuGsA+UqsMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/14/2014 Application Dated: 07/07/2014 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/14/2014 Application Dated: 07/06/2014 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application siXXjX091XLefvLyeCOvGQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/14/2014 Application Dated: 07/06/2014 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/14/2014 Application Dated: 07/06/2014 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.747 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.438 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device on a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application R3qmnd9lcvwWMr2RsOExfw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/14/2014 Application Dated: 07/06/2014 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.747 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.438 |
| Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device on a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/20/2016 Application Dated: 06/15/2016 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point (APINH103) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.072 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.177 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.137 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.125 |
| Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application EksZM08nVqbsiDhZ2s9CuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 07/20/2016 Application Dated: 06/15/2016 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point (APINH103) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.072 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.177 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.137 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.125 |
| Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/06/2016 Application Dated: 05/24/2016 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point (APINH103) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| 38 49 CC MO | 15E | 5745.0 - 5825.0 | 0.438 |
| Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 49YYWMjKWDPDSYvDc+qMog==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 06/06/2016 Application Dated: 05/24/2016 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH103 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point (APINH103) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| 38 49 CC MO | 15E | 5745.0 - 5825.0 | 0.438 |
| Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |