FCC ID Q9DAPINH203
ACCESS POINT
by Hewlett Packard Enterprise Company
Grantee Code: Q9D Product Code: APINH203
Latest application date: 2017-08-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class III permissive change to software defined radio | 2017-08-09 |
| 2412-2462 MHz | Original Equipment | 2017-05-10 |
| 5180-5240 MHz | Original Equipment | 2017-05-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| TempConfidential_APINH203_User Manual | Users Manual | 2017-11-06 | PDF 2.3 MB |
| 1703TW0106_Internal Photo | Internal Photos | 2018-01-06 | PDF 1.3 MB |
| TempConfidential_1703TW0106_Internal Photo | Internal Photos | 2017-11-06 | PDF 1.3 MB |
| TempConfidential_1703TW0106_External Photo | External Photos | 2017-11-06 | PDF 243.5 KB |
| 1703TW0106_External Photo | External Photos | 2017-08-09 | PDF 243.5 KB |
| APINH203_Label and Label Location | ID Label/Location Info | 2017-05-10 | PDF 399.3 KB |
| 1703TW0106_Test Setup Photo | Test Setup Photos | 2018-01-06 | PDF 505.2 KB |
| TempConfidential_1703TW0106_Test Setup Photo | Test Setup Photos | 2017-11-06 | PDF 552.1 KB |
| 1703TW0106-U6-FCC-UNII Test Report Part1 | Test Report | 2017-08-09 | PDF 5.2 MB |
| 1703TW0106-U6-FCC-UNII Test Report Part2 | Test Report | 2017-08-09 | PDF 5.5 MB |
| 1703TW0106-U6-FCC-UNII Test Report Part3 | Test Report | 2017-08-09 | PDF 5.6 MB |
| 1703TW0106-U6-FCC-UNII Test Report Part4 | Test Report | 2017-08-09 | PDF 5.4 MB |
| 1703TW0106-U6-FCC-UNII Test Report Part5 | Test Report | 2017-08-09 | PDF 4.5 MB |
| 1703TW0106-U6-FCC-UNII Test Report Part6 | Test Report | 2017-08-09 | PDF 4 MB |
| 1703TW0106-U7-FCC-DFS Test Report Part1 | Test Report | 2017-08-09 | PDF 3.2 MB |
| 1703TW0106-U7-FCC-DFS Test Report Part2 | Test Report | 2017-08-09 | PDF 2.9 MB |
| 1703TW0106-U1-FCC-DTS Test Report Part1 | Test Report | 2017-05-10 | PDF 5.2 MB |
| 1703TW0106-U1-FCC-DTS Test Report Part2 | Test Report | 2017-05-10 | PDF 5.5 MB |
| 1703TW0106-U1-FCC-DTS Test Report Part3 | Test Report | 2017-05-10 | PDF 5.7 MB |
| 1703TW0106-U2-FCC-UNII Test Report Part1 | Test Report | 2017-05-10 | PDF 5.2 MB |
| 1703TW0106-U2-FCC-UNII Test Report Part2 | Test Report | 2017-05-10 | PDF 5.4 MB |
| 1703TW0106-U2-FCC-UNII Test Report Part4 | Test Report | 2017-05-10 | PDF 2.5 MB |
| 1703TW0106-U2-FCC-UNII Test Report Part5 | Test Report | 2017-05-10 | PDF 4.4 MB |
| 1703TW0106-U3-FCC-Co-location Test Report | Test Report | 2017-05-10 | PDF 240.4 KB |
| APINH203-Aruba HPE Company Attestation | Cover Letter(s) | 2017-05-10 | PDF 146.9 KB |
| APINH203_Authority to Act as Agent | Cover Letter(s) | 2017-08-09 | PDF 181.7 KB |
| APINH203_C3PC Statement Letter | Cover Letter(s) | 2017-08-09 | PDF 53.3 KB |
| APINH203_Request for Confidentiality | Cover Letter(s) | 2017-08-09 | PDF 175.7 KB |
| APINH203_Authority to Act as Agent Metadata only | Cover Letter(s) | 2017-05-10 | PDF 1.3 MB |
| APINH203_Authority to Act as Agent 2017-04-24 | Cover Letter(s) | 2017-05-10 | PDF 1.3 MB |
| APINH203_FCC 15B DOC Letter Metadata only | Cover Letter(s) | 2017-05-10 | PDF 1.3 MB |
| APINH203_FCC 15B DOC Letter 2017-04-24 | Cover Letter(s) | 2017-05-10 | PDF 1.3 MB |
| APINH203_Request for Confidentiality | Cover Letter(s) | 2017-05-10 | PDF 2.4 MB |
| APINH203_Statement 2017-04-24 | Cover Letter(s) | 2017-05-10 | PDF 1.2 MB |
| 1703TW0106-U8-FCC-RF Exposure Report V2 | RF Exposure Info | 2017-08-09 | PDF 220.7 KB |
| 1703TW0106-U4-FCC-RF Exposure Report | RF Exposure Info | 2017-05-10 | PDF 168.9 KB |
| Confidential_APINH203_Block Diagram Metadata only | Block Diagram | PDF 1,015.2 KB | |
| Confidential_APINH203_Schematic Metadata only | Schematics | PDF 880.2 KB | |
| APINH203_Antenna Pattern Measurement Report Metadata only | Operational Description | PDF 632.4 KB | |
| Confidential_APINH203_Operational Description for C3PC V2 Metadata only | Operational Description | PDF 659.3 KB | |
| Confidential_APINH203_Operational Description_ Metadata only | Operational Description | PDF 357 KB | |
| Confidential_APINH203_SDR Letter Metadata only | SDR Software/Security Inf | PDF 2.4 MB | |
| Confidential_APINH203_Software Security Requirements Cover Letter Metadata only | SDR Software/Security Inf | PDF 148.4 KB |
Application Information
| Application ID | Hlf3jPVhde/YBFbpcTBjzQ== |
|---|---|
| Final Action Date | 2017-08-09 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0026486175 |
| Model | APINH203 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | ACCESS POINT |
| Responsible Party | Phillip Carranco, Compliance Manager, phillip.carranco@hpe.com |
| Technical Contact | Robin Wu, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com |
| Test Firm | Wu Jian, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com |
| TCB Email | hotline@acbcert.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/06/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Software Defined Radio Device. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This is a C3PC application. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Hlf3jPVhde/YBFbpcTBjzQ== | 2017-08-09 | Class III permissive change to software defined radio |
| QJw8bqibluZRzsoBQjEaBw== | 2017-05-10 | Original Equipment |
| 4Lil085/lYgCnJuATZRkqw== | 2017-05-10 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application QJw8bqibluZRzsoBQjEaBw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/10/2017 Application Dated: 04/24/2017 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH203 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1052 |
| Software Defined Radio Device. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application QJw8bqibluZRzsoBQjEaBw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 05/10/2017 Application Dated: 04/24/2017 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH203 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Digital Transmission System |
| Notes: | ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1052 |
| Software Defined Radio Device. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/09/2017 Application Dated: 07/10/2017 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH203 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0955 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.0962 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.0995 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0635 |
| Software Defined Radio Device. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This is a C3PC application. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Hlf3jPVhde/YBFbpcTBjzQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 08/09/2017 Application Dated: 07/10/2017 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH203 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0955 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.0962 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.0995 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0635 |
| Software Defined Radio Device. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This is a C3PC application. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/10/2017 Application Dated: 04/24/2017 |
| Hewlett Packard Enterprise Company |
| 3333 Scott Blvd |
| Santa Clara, CA 95054 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH203 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Subwoofer Adapter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0955 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0635 |
| Software Defined Radio Device. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 4Lil085/lYgCnJuATZRkqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States |
Date of Grant: 05/10/2017 Application Dated: 04/24/2017 |
| Attention: Phillip Carranco , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Q9DAPINH203 |
| Name of Grantee: | Hewlett Packard Enterprise Company |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Subwoofer Adapter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0955 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0635 |
| Software Defined Radio Device. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |