FCC ID Q9DAPINP303

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 11/01/2018 Application Dated: 10/30/2018

Hewlett Packard Enterprise Company

3333 Scott Blvd

Santa Clara, CA 95054

Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAPINP303
Name of Grantee:	Hewlett Packard Enterprise Company
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.144
CC MO ND	15E	5260.0  -  5320.0	0.144
CC MO ND	15E	5500.0  -  5720.0	0.14
CC MO	15E	5745.0  -  5825.0	0.148

Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States

Date of Grant: 11/01/2018 Application Dated: 10/30/2018

Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAPINP303
Name of Grantee:	Hewlett Packard Enterprise Company
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.144
CC MO ND	15E	5260.0  -  5320.0	0.144
CC MO ND	15E	5500.0  -  5720.0	0.14
CC MO	15E	5745.0  -  5825.0	0.148

Software Defined Radio Device. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application iddhEyJMJ5K6HYudxUiY6Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 11/01/2018 Application Dated: 10/30/2018

Hewlett Packard Enterprise Company

3333 Scott Blvd

Santa Clara, CA 95054

Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAPINP303
Name of Grantee:	Hewlett Packard Enterprise Company
Equipment Class:	Digital Transmission System
Notes:	Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.0064
CC	15C	2405.0  -  2480.0	0.0055
CC MO	15C	2412.0  -  2462.0	0.158

Software Defined Radio Device. Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Hewlett Packard Enterprise Company 3333 Scott Blvd Santa Clara, CA 95054 United States

Date of Grant: 11/01/2018 Application Dated: 10/30/2018

Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q9DAPINP303
Name of Grantee:	Hewlett Packard Enterprise Company
Equipment Class:	Digital Transmission System
Notes:	Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.0064
CC	15C	2405.0  -  2480.0	0.0055
CC MO	15C	2412.0  -  2462.0	0.158

Software Defined Radio Device. Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: