FCC ID Q9DAPINR15515P

Wireless Access Point

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: APINR15515P
Latest application date: 2016-08-12

FCC ID Device Details

FCC IDQ9DAPINR15515P
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeAPINR15515P
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com
Equipment ClassWireless Access Point
Test FirmNational Technical Systems

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2016-08-12
5180-5240 MHzClass III permissive change to software defined radio2016-06-09
5180-5240 MHzClass III permissive change to software defined radio2014-02-07
2412-2462 MHzOriginal Equipment2013-05-24
5180-5240 MHzOriginal Equipment2013-05-24

Exhibits

DocumentTypeAvailableFile
InstallationUsers Manual2014-02-07PDF 847.5 KB
Installation GuideUsers Manual2013-05-24PDF 847.5 KB
IntInternal Photos2013-05-24PDF 1.5 MB
ExtExternal Photos2014-02-07PDF 821.2 KB
ExtExternal Photos2013-05-24PDF 562 KB
APINR155ID Label/Location Info2013-05-24PDF 1 MB
APINR15PID Label/Location Info2013-05-24PDF 1 MB
Tst Photos DFSTest Setup Photos2016-08-12PDF 51.5 KB
Tst Photos NIITest Setup Photos2016-08-12PDF 1.6 MB
SetupTest Setup Photos2013-05-24PDF 792 KB
Tst Rep DFSTest Report2016-08-12PDF 5 MB
Tst Rep NIITest Report2016-08-12PDF 1.2 MB
UNII-3 AttestationTest Report2016-06-09PDF 1.2 MB
15 407Test Report2014-02-07PDF 5.6 MB
DFSTest Report2014-02-07PDF 1.2 MB
DTS Part 1Test Report2013-05-24PDF 5.7 MB
DTS Part 2Test Report2013-05-24PDF 4.9 MB
NIITest Report2013-05-24PDF 3.6 MB
No changes attestationAttestation Statements2016-08-12PDF 1.2 MB
Uniform SpreadingAttestation Statements2014-02-07PDF 85.7 KB
Auth LtrCover Letter(s)2016-08-12PDF 206 KB
Confid LtrCover Letter(s)2016-08-12PDF 127.1 KB
Cvr LtrCover Letter(s)2016-08-12PDF 28.8 KB
Permissive Change LtrCover Letter(s)2016-08-12PDF 1.2 MB
Cvr LtrCover Letter(s)2016-06-09PDF 28.7 KB
Permissive Change LtrCover Letter(s)2016-06-09PDF 1.2 MB
5600 5650 No Tx DeclarationCover Letter(s)2014-02-07PDF 53.8 KB
AuthorizationCover Letter(s)2014-02-07PDF 29.6 KB
ConfidCover Letter(s)2014-02-07PDF 29 KB
CoverCover Letter(s)2014-02-07PDF 92.3 KB
PCIII DeclarationCover Letter(s)2014-02-07PDF 25.1 KB
ConfidCover Letter(s)2013-05-24PDF 129.6 KB
LoACover Letter(s)2013-05-24PDF 119.5 KB
MPERF Exposure Info2014-02-07PDF 22.3 KB
MPERF Exposure Info2013-05-24PDF 24.8 KB
NII Security Metadata onlySDR Software/Security InfPDF 100.7 KB
UNII Security Metadata onlySDR Software/Security InfPDF 101.2 KB

Application Information

Application ID2XxpLDaLRVT0mi3xlECWDA==
Final Action Date2016-08-12
Application PurposeClass III permissive change to software defined radio
Applicant FRN0026486175
ModelAPINR15515P
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Access Point
Responsible PartyPhillip Carranco, Compliance Manager, phillip.carranco@hpe.com , 650-236-9490
AgentMark Mark Mark, National Technical Systems - Silicon Valley, svdoc@nts.com , 5105783500
Technical ContactMark Hill, National Technical Systems - Silicon Valley, svdoc@nts.com , 5105783500
Test FirmDavid Bare, National Technical Systems, david.bare@nts.com , 510-578-3500
TCB Emailsvtcb@nts.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsSoftware Defined Radio. Power listed is the maximum combined conducted output power. Professional installation is required. This device has 20 MHz and 40 MHz BW modes. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change to authorize operation in UNII-2 bands, operation in the UNII-3 band under Section 15.407(b)(4)(i) and authorize power increase in the UNII-1 band.

Applications

Application IDDatePurpose
2XxpLDaLRVT0mi3xlECWDA==2016-08-12Class III permissive change to software defined radio
RS1zNwUqalRmihEJ2IIiaA==2016-06-09Class III permissive change to software defined radio
uYlpAOezoocrkXmcPUAbwQ==2014-02-07Class III permissive change to software defined radio
yT1owlNM7xgrOI3wOoDGQw==2013-05-24Original Equipment
TEUETXmPuw0nz4Y/0DszJg==2013-05-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.95515CCC
2422-2452 MHz0.87715CCC
5180-5240 MHz0.26815ECC, MO
5180-5240 MHz0.025915E38, CC, MO
5180-5240 MHz0.025915ECC
5180-5240 MHz0.04415ECC
5190-5230 MHz0.044215ECC
5260-5320 MHz0.20715ECC, MO
5260-5320 MHz0.20715ECC
5270-5310 MHz0.20715ECC
5500-5700 MHz0.20615ECC, MO
5500-5700 MHz0.14115ECC
5510-5670 MHz0.20615ECC
5745-5825 MHz0.82815E49, CC, MO
5745-5825 MHz0.82815CCC
5745-5825 MHz0.18415ECC, MO
5755-5795 MHz0.71515CCC

Grants

TCB Grant - Application yT1owlNM7xgrOI3wOoDGQw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/24/2013

Application Dated: 05/22/2013
Aruba Networks, Inc.
1344 Crossman Ave.
Sunnyvale, CA 94089
 
Attention: Robert Hastings , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Aruba Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.955  
CC 15C 2422.0  -  2452.0 0.877  
CC 15C 5745.0  -  5825.0 0.828  
CC 15C 5755.0  -  5795.0 0.715  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter except in accordance with accepted multi-transmitter product procedures.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application yT1owlNM7xgrOI3wOoDGQw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Aruba Networks, Inc.
1344 Crossman Ave.
Sunnyvale, CA 94089
United States
  Date of Grant: 05/24/2013

Application Dated: 05/22/2013
 
Attention: Robert Hastings , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Aruba Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.955  
CC 15C 2422.0  -  2452.0 0.877  
CC 15C 5745.0  -  5825.0 0.828  
CC 15C 5755.0  -  5795.0 0.715  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter except in accordance with accepted multi-transmitter product procedures.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application uYlpAOezoocrkXmcPUAbwQ==

This application does not exist.

EAS Grant - Application uYlpAOezoocrkXmcPUAbwQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 94089
United States
  Date of Grant: 02/07/2014

Application Dated: 10/31/2013
 
Attention: Robert Hastings , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Q9DAPINR15515P
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.044  
CC 15E 5260.0  -  5320.0 0.207  
CC 15E 5270.0  -  5310.0 0.207  
CC 15E 5500.0  -  5700.0 0.141  
CC 15E 5510.0  -  5670.0 0.206  

This device has 20 MHz and 40 MHz BW modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application TEUETXmPuw0nz4Y/0DszJg==

Mail To:
Bill Graff, Manager of Certification Services
MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/24/2013

Application Dated: 05/22/2013
Aruba Networks, Inc.
1344 Crossman Ave.
Sunnyvale, CA 94089
 
Attention: Robert Hastings , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Aruba Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0259  
CC 15E 5190.0  -  5230.0 0.0442  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures.

End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150-5250 MHz Band.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TEUETXmPuw0nz4Y/0DszJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Aruba Networks, Inc.
1344 Crossman Ave.
Sunnyvale, CA 94089
United States
  Date of Grant: 05/24/2013

Application Dated: 05/22/2013
 
Attention: Robert Hastings , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Aruba Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0259  
CC 15E 5190.0  -  5230.0 0.0442  

Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures.

End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150-5250 MHz Band.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application RS1zNwUqalRmihEJ2IIiaA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 06/09/2016

Application Dated: 06/06/2016
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0259  
49 CC MO 15E 5745.0  -  5825.0 0.828  

Software Defined Radio. Power listed is the maximum combined conducted output power. Professional installation is required. This device has 20 MHz and 40 MHz BW modes. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application RS1zNwUqalRmihEJ2IIiaA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 06/09/2016

Application Dated: 06/06/2016
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0259  
49 CC MO 15E 5745.0  -  5825.0 0.828  

Software Defined Radio. Power listed is the maximum combined conducted output power. Professional installation is required. This device has 20 MHz and 40 MHz BW modes. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2XxpLDaLRVT0mi3xlECWDA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 08/12/2016

Application Dated: 07/28/2016
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.268  
CC MO 15E 5260.0  -  5320.0 0.207  
CC MO 15E 5500.0  -  5700.0 0.206  
CC MO 15E 5745.0  -  5825.0 0.184  

Software Defined Radio. Power listed is the maximum combined conducted output power. Professional installation is required. This device has 20 MHz and 40 MHz BW modes. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change to authorize operation in UNII-2 bands, operation in the UNII-3 band under Section 15.407(b)(4)(i) and authorize power increase in the UNII-1 band.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2XxpLDaLRVT0mi3xlECWDA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 08/12/2016

Application Dated: 07/28/2016
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DAPINR15515P
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.268  
CC MO 15E 5260.0  -  5320.0 0.207  
CC MO 15E 5500.0  -  5700.0 0.206  
CC MO 15E 5745.0  -  5825.0 0.184  

Software Defined Radio. Power listed is the maximum combined conducted output power. Professional installation is required. This device has 20 MHz and 40 MHz BW modes. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change to authorize operation in UNII-2 bands, operation in the UNII-3 band under Section 15.407(b)(4)(i) and authorize power increase in the UNII-1 band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: