FCC ID Q9DARUBA60

802.11 .a/.b/.g Access Point

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: ARUBA60
Latest application date: 2004-09-08

FCC ID Device Details

FCC IDQ9DARUBA60
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeARUBA60
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com arubanetworks.com
Equipment Class802.11 .a/.b/.g Access Point
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2400-2483.5 MHzOriginal Equipment2004-09-08
5250-5350 MHzOriginal Equipment2004-09-08

Exhibits

DocumentTypeAvailableFile
Chp 1 2Users Manual2004-09-08PDF 2.8 MB
Chp 3 AppdxUsers Manual2004-09-08PDF 2.5 MB
User Manual Chp 1 2Users Manual2004-09-08PDF 2.8 MB
User Manual Chp 3 AppUsers Manual2004-09-08PDF 2.5 MB
Internal PhotosInternal Photos2004-09-08PDF 610.4 KB
External PhotosExternal Photos2004-09-08PDF 248.6 KB
ID LabelID Label/Location Info2004-09-08PDF 78.2 KB
ID Label LocationID Label/Location Info2004-09-08PDF 45.1 KB
ID labelID Label/Location Info2004-09-08PDF 78.2 KB
Test Setup PhotosTest Setup Photos2004-09-08PDF 304.6 KB
Test ReportTest Report2004-09-08PDF 1.9 MB
Test RptTest Report2004-09-08PDF 1.9 MB
Confidentaility RequestCover Letter(s)2004-09-08PDF 24.8 KB
Confidentiality LetterCover Letter(s)2004-09-08PDF 24.8 KB
Antenna ListParts List/Tune Up Info2004-09-08PDF 82.2 KB
RF Exposure dataRF Exposure Info2004-09-08PDF 65.8 KB
RF Exposure infoRF Exposure Info2004-09-08PDF 65.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 51.1 KB
Schematic Metadata onlySchematicsPDF 256.4 KB
Sehematics Metadata onlySchematicsPDF 256.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 138.2 KB

Application Information

Application IDkq3oPCK68QR7HAHcq8QGSA==
Final Action Date2004-09-08
Application PurposeOriginal Equipment
Applicant FRN0026486175
ModelARUBA60
Frequency Range2400-2483.5 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11 .a/.b/.g Access Point
Responsible PartyPhillip Carranco, Compliance Manager, phillip.carranco@hpe.com , 650-236-9490
Technical ContactLOREN J VORREITER, ARUBA WIRELESS NETWORKS INC., LVORREITER@ARUBANETWORKS.COM , 408-754-3048
Non-Technical ContactLOREN J VORREITER, ARUBA WIRELESS NETWORKS INC., LVORREITER@ARUBANETWORKS.COM , 408-754-3048
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailtdwyer@us.tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grant was re-issued this date to reflect correction in listed equipment class.

Applications

Application IDDatePurpose
kq3oPCK68QR7HAHcq8QGSA==2004-09-08Original Equipment
is9Qc11GCCTsNu9eeKme3g==2004-09-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2400-2483.5 MHz0.023000015C36, CC
5250-5350 MHz0.007815ECC
5725-5825 MHz0.007715E36, CC

Grants

TCB Grant - Application kq3oPCK68QR7HAHcq8QGSA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 09/08/2004

Application Dated: 09/08/2004
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DARUBA60
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: 802.11 .a/.b/.g Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2400.0  -  2483.5 0.023  

Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grant was re-issued this date to reflect correction in listed equipment class.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kq3oPCK68QR7HAHcq8QGSA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 09/08/2004

Application Dated: 09/08/2004
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DARUBA60
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: 802.11 .a/.b/.g Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2400.0  -  2483.5 0.023  

Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grant was re-issued this date to reflect correction in listed equipment class.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application is9Qc11GCCTsNu9eeKme3g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 09/08/2004

Application Dated: 09/08/2004
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DARUBA60
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 .a/.b/.g Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5250.0  -  5350.0 0.0078  
36 CC 15E 5725.0  -  5825.0 0.0077  

Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application is9Qc11GCCTsNu9eeKme3g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 09/08/2004

Application Dated: 09/08/2004
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DARUBA60
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 .a/.b/.g Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5250.0  -  5350.0 0.0078  
36 CC 15E 5725.0  -  5825.0 0.0077  

Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: