FCC ID Q9DARUBA6061

802.11.a/.b/.g Access Point

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: ARUBA6061
Latest application date: 2004-10-28

FCC ID Device Details

FCC IDQ9DARUBA6061
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeARUBA6061
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com arubanetworks.com
Equipment Class802.11.a/.b/.g Access Point
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180 MHzOriginal Equipment2004-10-28
2412-2462 MHzOriginal Equipment2004-10-28

Exhibits

DocumentTypeAvailableFile
USer Manual Part 2Users Manual2004-10-28PDF 1.1 MB
User Manual Part 1Users Manual2004-10-28PDF 3.9 MB
User Manual Part 1Users Manual2004-10-28PDF 2.2 MB
User Manual Part 2Users Manual2004-10-28PDF 3 MB
Internal PhotosInternal Photos2004-10-28PDF 530.2 KB
Block Diagram Metadata onlyExternal Photos2004-10-28PDF 248.6 KB
External PhotosExternal Photos2004-10-28PDF 248.6 KB
ID LabelID Label/Location Info2004-10-28PDF 98.3 KB
Label Location Metadata onlyID Label/Location Info2004-10-28PDF 45.3 KB
Label artwork Metadata onlyID Label/Location Info2004-10-28PDF 98.3 KB
Test Setup PhotosTest Setup Photos2004-10-28PDF 194.3 KB
Test Report Metadata onlyTest Report2004-10-28PDF 1.9 MB
Test Reprot Part 2Test Report2004-10-28PDF 1.2 MB
Test report Part 1Test Report2004-10-28PDF 1.9 MB
Confidentiality RequestCover Letter(s)2004-10-28PDF 148 KB
Cover LetterCover Letter(s)2004-10-28PDF 199 KB
Cover LetterCover Letter(s)2004-10-28PDF 9.8 KB
Explanatory LetterCover Letter(s)2004-10-28PDF 199 KB
Explanatory letterCover Letter(s)2004-10-28PDF 199 KB
Antenna ListParts List/Tune Up Info2004-10-28PDF 82.2 KB
RF Exposure 2GHzRF Exposure Info2004-10-28PDF 65.4 KB
RF Exposure 5 GHzRF Exposure Info2004-10-28PDF 65.8 KB
RF Exposure Evaluation Metadata onlyRF Exposure Info2004-10-28PDF 65.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 71.4 KB
Schematic Metadata onlySchematicsPDF 256.4 KB
Schematics Metadata onlySchematicsPDF 256.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 138.2 KB

Application Information

Application IDon5/3+hVRf6/O63LUw2X4g==
Final Action Date2004-10-28
Application PurposeOriginal Equipment
Applicant FRN0026486175
ModelARUBA6061
Frequency Range5180 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11.a/.b/.g Access Point
Responsible PartyPhillip Carranco, Compliance Manager, phillip.carranco@hpe.com , 650-236-9490
Technical ContactVorreiter J Vorreiter, Aruba Wireless Networks Inc., lvorreiter@arubanetworks.com , 408-754-3048
Non-Technical ContactLoren J Vorreiter, Aruba Wireless Networks Inc., lvorreiter@arubanetworks.com , 408-754-3048
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailtdwyer@us.tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsGrant re-issued 9/14/05 to reflect changes due to erroneous power levels reported on the original Form 731. No changes to the approved equipment or test results have been made. Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Per grant note 36 below, the professional installer will be provided with instructions and will ensure that the applicable EIRP limits are not exceeded when antennas with gains exceeding 6 dBi are employed.

Applications

Application IDDatePurpose
on5/3+hVRf6/O63LUw2X4g==2004-10-28Original Equipment
20KQRJ+gXKxhqllmMi0qFw==2004-10-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.09315C
5180 MHz0.04115E36, CC
5260-5320 MHz0.04915E
5745-5825 MHz0.04715C36, CC

Grants

TCB Grant - Application on5/3+hVRf6/O63LUw2X4g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 10/28/2004

Application Dated: 10/28/2004
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DARUBA6061
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11.a/.b/.g Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15E 5180.0  -  5180.0 0.041  
15E 5260.0  -  5320.0 0.049  

Grant re-issued 9/14/05 to reflect changes due to erroneous power levels reported on the original Form 731. No changes to the approved equipment or test results have been made.

Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Per grant note 36 below, the professional installer will be provided with instructions and will ensure that the applicable EIRP limits are not exceeded when antennas with gains exceeding 6 dBi are employed.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application on5/3+hVRf6/O63LUw2X4g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 10/28/2004

Application Dated: 10/28/2004
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DARUBA6061
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11.a/.b/.g Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15E 5180.0  -  5180.0 0.041  
15E 5260.0  -  5320.0 0.049  

Grant re-issued 9/14/05 to reflect changes due to erroneous power levels reported on the original Form 731. No changes to the approved equipment or test results have been made.

Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Per grant note 36 below, the professional installer will be provided with instructions and will ensure that the applicable EIRP limits are not exceeded when antennas with gains exceeding 6 dBi are employed.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 20KQRJ+gXKxhqllmMi0qFw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 10/28/2004

Application Dated: 10/28/2004
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DARUBA6061
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: 802.11.a/.b/.g
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.093  
36 CC 15C 5745.0  -  5825.0 0.047  

Grant re-issued 9/14/05 to reflect changes due to erroneous power levels reported on the original Form 731. No changes to the approved equipment or test results have been made. Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Per grant note 36 below, the professional installer will be provided with instructions and will ensure that the applicable EIRP limits are not exceeded when antennas with gains exceeding 6 dBi are employed.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 20KQRJ+gXKxhqllmMi0qFw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 10/28/2004

Application Dated: 10/28/2004
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DARUBA6061
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: 802.11.a/.b/.g
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.093  
36 CC 15C 5745.0  -  5825.0 0.047  

Grant re-issued 9/14/05 to reflect changes due to erroneous power levels reported on the original Form 731. No changes to the approved equipment or test results have been made. Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Per grant note 36 below, the professional installer will be provided with instructions and will ensure that the applicable EIRP limits are not exceeded when antennas with gains exceeding 6 dBi are employed.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: