FCC ID Q9DWAP3212-001

Inflight Access Point

by Hewlett Packard Enterprise Company

Grantee Code: Q9D   Product Code: WAP3212001
Latest application date: 2015-05-21

FCC ID Device Details

FCC IDQ9DWAP3212-001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQ9D
Product CodeWAP3212001
Applicant BusinessHewlett Packard Enterprise Company 🇺🇸
Related Domains hpe.com
Equipment ClassInflight Access Point
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-05-21
5180-5240 MHzOriginal Equipment2015-05-12

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2015-10-07PDF 608.6 KB
Manual 1Users Manual2015-10-07PDF 608.6 KB
Manual 2Users Manual2015-10-07PDF 608.6 KB
IntInternal Photos2015-10-07PDF 1.9 MB
Ant ArrayExternal Photos2015-10-07PDF 2 MB
ExtExternal Photos2015-10-07PDF 1.5 MB
LabelID Label/Location Info2015-05-21PDF 276.2 KB
LocationID Label/Location Info2015-05-21PDF 647.1 KB
Outline DrawingID Label/Location Info2015-05-12PDF 647.1 KB
Unit LabelID Label/Location Info2015-05-12PDF 276.2 KB
SetupTest Setup Photos2015-10-07PDF 693.6 KB
Test ReportTest Report2015-05-21PDF 2.4 MB
NII Test ReportTest Report2015-05-12PDF 2.8 MB
DofCCover Letter(s)2015-05-21PDF 130.4 KB
FCC Inquery 906981Cover Letter(s)2015-05-21PDF 59.7 KB
SDR RequestCover Letter(s)2015-05-21PDF 105.2 KB
FCC Inquiry 906981Cover Letter(s)2015-05-12PDF 59.7 KB
LOACover Letter(s)2015-05-12PDF 389.9 KB
RFxRF Exposure Info2015-05-21PDF 99.1 KB
Block Metadata onlyBlock DiagramPDF 84.4 KB
Schema Metadata onlySchematicsPDF 2.4 MB
Schema 1 Metadata onlySchematicsPDF 2.4 MB
Schema 2 Metadata onlySchematicsPDF 3 MB
Schema 3 Metadata onlySchematicsPDF 1.1 MB
Schema2 Metadata onlySchematicsPDF 3 MB
Schema3 Metadata onlySchematicsPDF 1.1 MB
Schema4 Metadata onlySchematicsPDF 740.1 KB
Schema5 Metadata onlySchematicsPDF 5.1 MB
Data Sheet Metadata onlyOperational DescriptionPDF 618 KB
Device Security Metadata onlySDR Software/Security InfPDF 251.6 KB
SDR Security Metadata onlySDR Software/Security InfPDF 486.9 KB
SDR Descript Metadata onlySDR Software/Security InfPDF 486.9 KB
SW Config Control Metadata onlySDR Software/Security InfPDF 114.5 KB
Software Configuration Control Metadata onlySDR Software/Security InfPDF 251.6 KB
Parts Metadata onlyParts List/Tune Up InfoPDF 3.7 MB
Parts 1 Metadata onlyParts List/Tune Up InfoPDF 3.7 MB
Parts 2 Metadata onlyParts List/Tune Up InfoPDF 3.2 MB
Parts 3 Metadata onlyParts List/Tune Up InfoPDF 443.5 KB
Parts2 Metadata onlyParts List/Tune Up InfoPDF 3.2 MB
Parts3 Metadata onlyParts List/Tune Up InfoPDF 443.5 KB
Parts4 Metadata onlyParts List/Tune Up InfoPDF 414.5 KB

Application Information

Application IDgEYWn+x/Fo7057Bpp3CK9g==
Final Action Date2015-05-21
Application PurposeOriginal Equipment
Applicant FRN0026486175
ModelWAP3212-001
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionInflight Access Point
Responsible PartyPhillip Carranco, Compliance Manager, phillip.carranco@hpe.com , 650-236-9490
Technical ContactGordon Hurst, MiCOM Labs, certification@micomlabs.com , (925)4620304
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/07/2015
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150- 5250 MHz Band. This device has 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
gEYWn+x/Fo7057Bpp3CK9g==2015-05-21Original Equipment
Z5Sz9cYelUkT+6rz2F239Q==2015-05-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.993115CCC
5180-5240 MHz0.049415E39, CC
5260-5320 MHz0.21915E39, CC
5500-5700 MHz0.22415E39, CC
5745-5825 MHz0.977215CCC

Grants

TCB Grant - Application Z5Sz9cYelUkT+6rz2F239Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/12/2015

Application Dated: 04/10/2015
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DWAP3212-001
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Inflight Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
39 CC 15E 5180.0  -  5240.0 0.0494  
39 CC 15E 5260.0  -  5320.0 0.219  
39 CC 15E 5500.0  -  5700.0 0.224  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150- 5250 MHz Band.

This device has 20 MHz and 40 MHz bandwidth modes.


39: This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Z5Sz9cYelUkT+6rz2F239Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 05/12/2015

Application Dated: 04/10/2015
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DWAP3212-001
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Inflight Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
39 CC 15E 5180.0  -  5240.0 0.0494  
39 CC 15E 5260.0  -  5320.0 0.219  
39 CC 15E 5500.0  -  5700.0 0.224  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150- 5250 MHz Band.

This device has 20 MHz and 40 MHz bandwidth modes.


39: This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application gEYWn+x/Fo7057Bpp3CK9g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/21/2015

Application Dated: 04/10/2015
Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DWAP3212-001
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Inflight Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.9931  
CC 15C 5745.0  -  5825.0 0.9772  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150- 5250 MHz Band.

This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application gEYWn+x/Fo7057Bpp3CK9g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett Packard Enterprise Company
3333 Scott Blvd
Santa Clara, CA 95054
United States
  Date of Grant: 05/21/2015

Application Dated: 04/10/2015
 
Attention: Phillip Carranco , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q9DWAP3212-001
Name of Grantee:  Hewlett Packard Enterprise Company
Equipment Class: Digital Transmission System
Notes: Inflight Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.9931  
CC 15C 5745.0  -  5825.0 0.9772  

Power Output listed is the maximum combined Conducted output power. Device is an 802.11 a/b/g/n/ac access point in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users and installers must understand and be provided with the outdoor usage prohibition instructions when using the 5150- 5250 MHz Band.

This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: