FCC ID QC8-AN50

Access Node

by Redline Communications Inc.

Grantee Code: QC8   Product Code: AN50
Latest application date: 2002-11-27

FCC ID Device Details

FCC IDQC8-AN50
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQC8
Product CodeAN50
Applicant BusinessRedline Communications Inc. 🇨🇦
Related Domains rdlcom.com
Equipment ClassAccess Node
Test FirmUltraTech Engineering Labs Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5735-5815 MHzClass II permissive change or modification of presently authorized equipment2002-11-27
5735-5815 MHzOriginal Equipment2002-07-02

Exhibits

DocumentTypeAvailableFile
installation manualUsers Manual2002-07-02PDF 402.7 KB
users manual 1Users Manual2002-07-02PDF 986.2 KB
users manual 2Users Manual2002-07-02PDF 1.2 MB
internal photosInternal Photos2002-07-02PDF 2.5 MB
zoomed internal photosInternal Photos2002-07-02PDF 1.1 MB
external photosExternal Photos2002-11-27PDF 196.8 KB
external photosExternal Photos2002-07-02PDF 887.1 KB
label sample and locationID Label/Location Info2002-07-02PDF 265.6 KB
test setupTest Setup Photos2002-11-27PDF 440 KB
test setup photosTest Setup Photos2002-07-02PDF 364.4 KB
test reportTest Report2002-11-27PDF 3.1 MB
antenna data 1Test Report2002-07-02PDF 824.4 KB
antenna data 2Test Report2002-07-02PDF 201.5 KB
plots 1Test Report2002-07-02PDF 706.4 KB
plots 10Test Report2002-07-02PDF 766.4 KB
plots 11Test Report2002-07-02PDF 765.5 KB
plots 12Test Report2002-07-02PDF 338.5 KB
plots 13Test Report2002-07-02PDF 579.4 KB
plots 14Test Report2002-07-02PDF 565.1 KB
plots 15Test Report2002-07-02PDF 281.1 KB
plots 16Test Report2002-07-02PDF 669.9 KB
plots 17Test Report2002-07-02PDF 668.5 KB
plots 18Test Report2002-07-02PDF 659.7 KB
plots 19Test Report2002-07-02PDF 703.4 KB
plots 2Test Report2002-07-02PDF 703.7 KB
plots 20Test Report2002-07-02PDF 300.5 KB
plots 21Test Report2002-07-02PDF 710.1 KB
plots 22Test Report2002-07-02PDF 820.3 KB
plots 3Test Report2002-07-02PDF 818.7 KB
plots 4Test Report2002-07-02PDF 957.7 KB
plots 5Test Report2002-07-02PDF 206.1 KB
plots 6Test Report2002-07-02PDF 754.3 KB
plots 7Test Report2002-07-02PDF 766.3 KB
plots 8Test Report2002-07-02PDF 894 KB
plots 9Test Report2002-07-02PDF 895.1 KB
test report 1Test Report2002-07-02PDF 887.7 KB
test report 2Test Report2002-07-02PDF 778.2 KB
letter regarding class II changeCover Letter(s)2002-11-27PDF 122.5 KB
request for confidentialityCover Letter(s)2002-07-02PDF 151.8 KB
RF exposure infoRF Exposure Info2002-07-02PDF 405.8 KB
alignment procedureParts List/Tune Up Info2002-07-02PDF 10.8 KB
block diagram Metadata onlyBlock DiagramPDF 17.1 KB
schematics 1 Metadata onlySchematicsPDF 112.2 KB
schematics 2 Metadata onlySchematicsPDF 161.3 KB
operational description Metadata onlyOperational DescriptionPDF 51.6 KB
bill of materials Metadata onlyParts List/Tune Up InfoPDF 27.2 KB

Application Information

Application IDGCEcin9CxxNYiZMa6P6zkQ==
Final Action Date2002-11-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007028533
ModelAN50
Frequency Range5735-5815 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAccess Node
Responsible PartyBradford Stimpson, VP Engineering, bstimpson@rdlcom.com , 416-888-4874
Test FirmTri Luu, UltraTech Engineering Labs Inc., tri@ultratech-labs.com , 877-747-6381
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis device must be professionaly installed, and may only be used in point-to-point applications. The two types of antennas used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons during normal operation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
GCEcin9CxxNYiZMa6P6zkQ==2002-11-27Class II permissive change or modification of presently authorized equipment
7Of85lnwa6ATuRZNABZyYg==2002-07-02Original Equipment

Equipment Authorization

FrequencyOutputRules
5735-5815 MHz0.000013815E
5735-5815 MHz0.11215E

Grants

TCB Grant - Application GCEcin9CxxNYiZMa6P6zkQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/27/2002

Application Dated: 11/27/2002
Redline Communications Inc.
302 Town Centre Blvd, Suite 400
Markham, Ontario, L3R 0E8
Canada
 
Attention: Bradford Stimpson , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QC8-AN50
Name of Grantee:  Redline Communications Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5735.0  -  5815.0 0.0000138  
15E 5735.0  -  5815.0 0.112  

This device must be professionaly installed, and may only be used in point-to-point applications. The two types of antennas used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons during normal operation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

EAS Grant - Application GCEcin9CxxNYiZMa6P6zkQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Redline Communications Inc.
302 Town Centre Blvd, Suite 400
Markham, Ontario, L3R 0E8
Canada
  Date of Grant: 11/27/2002

Application Dated: 11/27/2002
 
Attention: Bradford Stimpson , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QC8-AN50
Name of Grantee:  Redline Communications Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5735.0  -  5815.0 0.0000138  
15E 5735.0  -  5815.0 0.112  

This device must be professionaly installed, and may only be used in point-to-point applications. The two types of antennas used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons during normal operation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.



TCB Grant - Application 7Of85lnwa6ATuRZNABZyYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/02/2002

Application Dated: 07/02/2002
Redline Communications Inc.
302 Town Centre Blvd, Suite 400
Markham, Ontario, L3R 0E8
Canada
 
Attention: Bradford Stimpson , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QC8-AN50
Name of Grantee:  Redline Communications Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5735.0  -  5815.0 0.0000138  
15E 5735.0  -  5815.0 0.112  

This device must be professionaly installed, and may only be used in point-to-point applications. The two types of antennas used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons during normal operation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

EAS Grant - Application 7Of85lnwa6ATuRZNABZyYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Redline Communications Inc.
302 Town Centre Blvd, Suite 400
Markham, Ontario, L3R 0E8
Canada
  Date of Grant: 07/02/2002

Application Dated: 07/02/2002
 
Attention: Bradford Stimpson , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QC8-AN50
Name of Grantee:  Redline Communications Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5735.0  -  5815.0 0.0000138  
15E 5735.0  -  5815.0 0.112  

This device must be professionaly installed, and may only be used in point-to-point applications. The two types of antennas used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons during normal operation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.



Mail To: