FCC ID QCIIDXMOD1

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719

Date of Grant: 04/27/2018 Application Dated: 04/27/2018

SMART Technologies Inc.

3636 Research Road NW

Calgary, T2L 1Y1 Canada

Attention: Nicole McMillan , Manager, Systems Design, Regulatory and Complian

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QCIIDXMOD1
Name of Grantee:	SMART Technologies Inc.
Equipment Class:	Digital Transmission System
Notes:	WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.1318

Modular Approval. Power Output listed is Conducted. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz and 40 MHz bandwidth modes and it contains 5G WLAN transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

SMART Technologies Inc. 3636 Research Road NW Calgary, T2L 1Y1 Canada

Date of Grant: 04/27/2018 Application Dated: 04/27/2018

Attention: Nicole McMillan , Manager, Systems Design, Regulatory and Complian

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QCIIDXMOD1
Name of Grantee:	SMART Technologies Inc.
Equipment Class:	Digital Transmission System
Notes:	WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.1318

Modular Approval. Power Output listed is Conducted. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz and 40 MHz bandwidth modes and it contains 5G WLAN transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 6neYa/8v5jDobqJHzcqfLw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719

Date of Grant: 04/27/2018 Application Dated: 04/27/2018

SMART Technologies Inc.

3636 Research Road NW

Calgary, T2L 1Y1 Canada

Attention: Nicole McMillan , Manager, Systems Design, Regulatory and Complian

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QCIIDXMOD1
Name of Grantee:	SMART Technologies Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.0175
38 CC MO	15E	5260.0  -  5320.0	0.0165
38 CC MO	15E	5500.0  -  5580.0	0.0126
38 CC MO	15E	5660.0  -  5700.0	0.013

Modular Approval. Power Output listed is Conducted. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4G WLAN transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 14-30 as a Client only without Radar Detection.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

SMART Technologies Inc. 3636 Research Road NW Calgary, T2L 1Y1 Canada

Date of Grant: 04/27/2018 Application Dated: 04/27/2018

Attention: Nicole McMillan , Manager, Systems Design, Regulatory and Complian

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QCIIDXMOD1
Name of Grantee:	SMART Technologies Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.0175
38 CC MO	15E	5260.0  -  5320.0	0.0165
38 CC MO	15E	5500.0  -  5580.0	0.0126
38 CC MO	15E	5660.0  -  5700.0	0.013

Modular Approval. Power Output listed is Conducted. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4G WLAN transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 14-30 as a Client only without Radar Detection.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: