FCC ID QDS-BRCM1005
WLAN Mini-PCI Card
by Broadcom Corporation
Grantee Code: QDS Product Code: BRCM1005
Latest application date: 2003-05-20
FCC ID Device Details
| FCC ID | QDS-BRCM1005 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QDS |
| Product Code | BRCM1005 |
| Applicant Business | Broadcom Corporation 🇺🇸 |
| Related Domains |  broadcom.com |
| Equipment Class | WLAN Mini-PCI Card |
| Test Firm | Cetecom Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2464 MHz | Class II permissive change or modification of presently authorized equipment | 2003-05-20 |
| 2412-2464 MHz | Original Equipment | 2002-12-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| LoA Belkin | Users Manual | 2002-12-16 | PDF 95.6 KB |
| Loa Lynksys | Users Manual | 2002-12-16 | PDF 95 KB |
| User Manual | Users Manual | 2002-12-16 | PDF 718.9 KB |
| Internal Photos | Internal Photos | 2003-05-20 | PDF 433.6 KB |
| Internal Photos | Internal Photos | 2002-12-16 | PDF 291.4 KB |
| External Photos | External Photos | 2003-05-20 | PDF 733.8 KB |
| External Photos | External Photos | 2002-12-16 | PDF 309.8 KB |
| Label | ID Label/Location Info | 2002-12-16 | PDF 207.2 KB |
| Block Diagram | Block Diagram | 2002-12-16 | PDF 76 KB |
| Operational Description | Operational Description | 2002-12-16 | PDF 76 KB |
| Test Setup Photos | Test Setup Photos | 2003-05-20 | PDF 218.2 KB |
| Test Setup Photos | Test Setup Photos | 2002-12-16 | PDF 488.5 KB |
| Test Report | Test Report | 2003-05-20 | PDF 708.4 KB |
| 15x35 Duty Cycle Correction Factor | Test Report | 2002-12-16 | PDF 100.9 KB |
| Test Report | Test Report | 2002-12-16 | PDF 634.5 KB |
| Test Report revised | Test Report | 2002-12-16 | PDF 605.6 KB |
| Declaration | Attestation Statements | 2002-12-16 | PDF 66.4 KB |
| Change Description | Cover Letter(s) | 2003-05-20 | PDF 69.3 KB |
| Confidentiality Request | Cover Letter(s) | 2003-05-20 | PDF 78 KB |
| Confidentiality Request | Cover Letter(s) | 2002-12-16 | PDF 74.6 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2002-12-16 | PDF 63.5 KB |
| MPE Calculation | RF Exposure Info | 2002-12-16 | PDF 93.2 KB |
| BOM Metadata only | Schematics | PDF 84.1 KB | |
| BOM Metadata only | Schematics | PDF 36.2 KB | |
| Cicuit Diagram Metadata only | Schematics | PDF 644.5 KB | |
| Circuit Diagram Metadata only | Schematics | PDF 610.3 KB | |
| PCB Metadata only | Schematics | PDF 1.5 MB | |
| PCB Metadata only | Schematics | PDF 1.3 MB | |
| OP revised Metadata only | Operational Description | PDF 76 KB |
Application Information
| Application ID | jjrm2QdjHyNcWWlam7dqrA== |
|---|---|
| Final Action Date | 2003-05-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007091952 |
| Model | BRCM1005 |
| Frequency Range | 2412-2464 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN Mini-PCI Card |
| Responsible Party | Anne Liang, Manager, Compliance Engineering, aliang@broadcom.com , 4089225890 |
| Agent | Lothar Lothar Lothar, Cetecom Inc., Lothar.Schmidt@cetecomusa.com  , +1 408 586 6214 |
| Test Firm | Lothar Schmidt, Cetecom Inc., lothar.schmidt@cetecomusa.com , 408-586-6200 |
| TCB Email | gerald.schmidt@ict.cetecom.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This Class II Permissive Change allows new PA components. Module Approval. Power listed is peak conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jjrm2QdjHyNcWWlam7dqrA== | 2003-05-20 | Class II permissive change or modification of presently authorized equipment |
| tWK3mIKPLZM+sj59KHRKww== | 2002-12-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application tWK3mIKPLZM+sj59KHRKww==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 12/16/2002 Application Dated: 12/16/2002 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1005 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Mini-PCI Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2464.0 | 0.359 |
| Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application tWK3mIKPLZM+sj59KHRKww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 12/16/2002 Application Dated: 12/16/2002 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1005 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Mini-PCI Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2464.0 | 0.359 |
| Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 05/20/2003 Application Dated: 05/20/2003 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1005 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Mini-PCI Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2464.0 | 0.359 |
| This Class II Permissive Change allows new PA components. Module Approval. Power listed is peak conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application jjrm2QdjHyNcWWlam7dqrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 05/20/2003 Application Dated: 05/20/2003 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1005 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Mini-PCI Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2464.0 | 0.359 |
| This Class II Permissive Change allows new PA components. Module Approval. Power listed is peak conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |