FCC ID QDS-BRCM1005-D

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany

Date of Grant: 05/21/2003 Application Dated: 05/21/2003

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

This Class II Permissive Change adds one antenna configuration to previous filing for Laptop model PP07L. Power Output listed is peak conducted. The antenna(s) and transmitter in this device must be installed by the manufacturer as shown in the filing. The antenna(s) must not be co-located or operating in conjunction with any other antenna(s) or transmitter. The SAR data in this filing are applicable to demonstrate compliance for the final products only as shown in this filing. End-users must be provided with the appropriate information for satisfying RF exposure compliance. Maximum SAR value measured is: Body 0.122 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 05/21/2003 Application Dated: 05/21/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

This Class II Permissive Change adds one antenna configuration to previous filing for Laptop model PP07L. Power Output listed is peak conducted. The antenna(s) and transmitter in this device must be installed by the manufacturer as shown in the filing. The antenna(s) must not be co-located or operating in conjunction with any other antenna(s) or transmitter. The SAR data in this filing are applicable to demonstrate compliance for the final products only as shown in this filing. End-users must be provided with the appropriate information for satisfying RF exposure compliance. Maximum SAR value measured is: Body 0.122 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application VTe1h7mMh3YOoJmJt25+tQ==

EAS Grant - Application VTe1h7mMh3YOoJmJt25+tQ==

TCB Grant - Application pBlBsKYaoZ+pxnKLp4SfUg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany

Date of Grant: 02/28/2003 Application Dated: 02/28/2003

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

Power Output listed is Conducted. This filing is only applicable for WLAN used inside specific laptop hosts as demonstrated in the filing. The antenna(s) and transmitter in this device must be installed by the manufacturer as shown in the filing. The antenna(s) must not be co-located or operating in conjunction with any other antenna(s) or transmitter. The SAR data in this filing are applicable to demonstrate compliance for the final products only as shown in this filing. End-users must be provided with the appropriate information for satisfying RF exposure compliance. Maximum SAR value measured is: Body 0.479 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 02/28/2003 Application Dated: 02/28/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

Power Output listed is Conducted. This filing is only applicable for WLAN used inside specific laptop hosts as demonstrated in the filing. The antenna(s) and transmitter in this device must be installed by the manufacturer as shown in the filing. The antenna(s) must not be co-located or operating in conjunction with any other antenna(s) or transmitter. The SAR data in this filing are applicable to demonstrate compliance for the final products only as shown in this filing. End-users must be provided with the appropriate information for satisfying RF exposure compliance. Maximum SAR value measured is: Body 0.479 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application pbhbTJH5/VBFWwN3aENJMA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany

Date of Grant: 01/14/2004 Application Dated: 01/14/2004

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

This Class II Permissive Change allows new PA components. Power Output listed is peak conducted. The antenna(s) in this device must be installed by the manufacturer as shown in the filing. The antenna(s) must not be co-located or operating in conjunction with any other antenna(s) or transmitter. The SAR data in this filing are applicable to demonstrate compliance for the final products only as shown in this filing. End-users must be provided with the appropriate information for satisfying RF exposure compliance The highest reported SAR value for all filings approved under this FCC ID is: 0.731 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 01/14/2004 Application Dated: 01/14/2004

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

This Class II Permissive Change allows new PA components. Power Output listed is peak conducted. The antenna(s) in this device must be installed by the manufacturer as shown in the filing. The antenna(s) must not be co-located or operating in conjunction with any other antenna(s) or transmitter. The SAR data in this filing are applicable to demonstrate compliance for the final products only as shown in this filing. End-users must be provided with the appropriate information for satisfying RF exposure compliance The highest reported SAR value for all filings approved under this FCC ID is: 0.731 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application HPSNo0W074SaWELQPKpn3A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 07/01/2003 Application Dated: 07/01/2003

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

In this Class II permissive change filing, two alternate antennas are included and to be used with specific notebook computer as mobile device per section 2.1091 of FCC rules. Limited Modular Approval. Power output listed is conducted. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 07/01/2003 Application Dated: 07/01/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

In this Class II permissive change filing, two alternate antennas are included and to be used with specific notebook computer as mobile device per section 2.1091 of FCC rules. Limited Modular Approval. Power output listed is conducted. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application GM5xjQSHbb6NB2tna3Twkw==

EAS Grant - Application GM5xjQSHbb6NB2tna3Twkw==

TCB Grant - Application 5qCHcz+c2Uxm+zrIaBZ6AA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany

Date of Grant: 05/28/2003 Application Dated: 05/28/2003

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

This Class II Permissive Change adds Laptop model PPT to previous filing. Power Output listed is peak conducted. The antenna(s) and transmitter in this device must be installed by the manufacturer as shown in the filing. The antenna(s) must not be co-located or operating in conjunction with any other antenna(s) or transmitter. The SAR data in this filing are applicable to demonstrate compliance for the final products only as shown in this filing. End-users must be provided with the appropriate information for satisfying RF exposure compliance. Maximum SAR value measured is: Body 0.719 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 05/28/2003 Application Dated: 05/28/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

This Class II Permissive Change adds Laptop model PPT to previous filing. Power Output listed is peak conducted. The antenna(s) and transmitter in this device must be installed by the manufacturer as shown in the filing. The antenna(s) must not be co-located or operating in conjunction with any other antenna(s) or transmitter. The SAR data in this filing are applicable to demonstrate compliance for the final products only as shown in this filing. End-users must be provided with the appropriate information for satisfying RF exposure compliance. Maximum SAR value measured is: Body 0.719 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 09G5nWizixgRA5t68UkQcA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany

Date of Grant: 01/07/2004 Application Dated: 01/07/2004

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

This Class II Permissive Change adds Laptop model PP10L with two antenna configurations as documented in this filing. Power Output listed is peak conducted. The antenna(s) in this device must be installed by the manufacturer as shown in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for all filings approved under this FCC ID is: 0.719 W/kg

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 01/07/2004 Application Dated: 01/07/2004

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1005-D
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	802.11g MINI PCI Card build in Laptops
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.359

This Class II Permissive Change adds Laptop model PP10L with two antenna configurations as documented in this filing. Power Output listed is peak conducted. The antenna(s) in this device must be installed by the manufacturer as shown in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for all filings approved under this FCC ID is: 0.719 W/kg

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: