FCC ID QDS-BRCM1013
Broadcom 802.11g Mini PCI Card
by Broadcom Corporation
Grantee Code: QDS Product Code: BRCM1013
Latest application date: 2004-11-24
FCC ID Device Details
| FCC ID | QDS-BRCM1013 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QDS |
| Product Code | BRCM1013 |
| Applicant Business | Broadcom Corporation 🇺🇸 |
| Related Domains |  broadcom.com |
| Equipment Class | Broadcom 802.11g Mini PCI Card |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-11-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-08-25 |
| 2412-2462 MHz | Original Equipment | 2004-07-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Notebook User Manual | Users Manual | 2004-08-25 | PDF 1.2 MB |
| Regulatory information | Users Manual | 2004-08-25 | PDF 781.2 KB |
| HP Reference guide | Users Manual | 2004-07-19 | PDF 3.5 MB |
| HP Start up Guide | Users Manual | 2004-07-19 | PDF 3.1 MB |
| Notebook Regulatory information | Users Manual | 2004-07-19 | PDF 781.2 KB |
| WLAN BCM94306MPLNA User Guide | Users Manual | 2004-07-19 | PDF 626.4 KB |
| WLAN Mini PCI Card Installation Guide | Users Manual | 2004-07-19 | PDF 3.5 MB |
| Internal Photos | Internal Photos | 2004-07-19 | PDF 541 KB |
| External Photos | External Photos | 2004-11-24 | PDF 850.9 KB |
| External Photos | External Photos | 2004-07-19 | PDF 989.7 KB |
| FCC ID Label | ID Label/Location Info | 2004-07-19 | PDF 46.5 KB |
| Antenna Specs | Operational Description | 2004-11-24 | PDF 552 KB |
| Setup Photos | Test Setup Photos | 2004-11-24 | PDF 294.1 KB |
| Setup Photos | Test Setup Photos | 2004-08-25 | PDF 498 KB |
| Mobile Setup Photos | Test Setup Photos | 2004-07-19 | PDF 315.1 KB |
| Portable Setup Photos | Test Setup Photos | 2004-07-19 | PDF 293.4 KB |
| Test Report | Test Report | 2004-11-24 | PDF 1.5 MB |
| Test Report | Test Report | 2004-08-25 | PDF 1.3 MB |
| Mobile Report | Test Report | 2004-07-19 | PDF 1.3 MB |
| Portable Report | Test Report | 2004-07-19 | PDF 1.4 MB |
| Cover letter | Cover Letter(s) | 2004-11-24 | PDF 86 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2004-08-25 | PDF 84.6 KB |
| TCB Q and A | Cover Letter(s) | 2004-08-25 | PDF 14.3 KB |
| Modular Approval Letter | Cover Letter(s) | 2004-07-19 | PDF 6.9 KB |
| Request for Confidentiality | Cover Letter(s) | 2004-07-19 | PDF 54.9 KB |
| TCB Q and A 1 | Cover Letter(s) | 2004-07-19 | PDF 15 KB |
| TCB Q and A 2 | Cover Letter(s) | 2004-07-19 | PDF 13.1 KB |
| Antenna Information | Parts List/Tune Up Info | 2004-08-25 | PDF 101.1 KB |
| SAR Attachment 1 | RF Exposure Info | 2004-08-25 | PDF 175.5 KB |
| SAR Attachment 2 | RF Exposure Info | 2004-08-25 | PDF 782.2 KB |
| SAR Attachment 3 | RF Exposure Info | 2004-08-25 | PDF 430.5 KB |
| SAR Attachment 4 | RF Exposure Info | 2004-08-25 | PDF 467.1 KB |
| SAR Report | RF Exposure Info | 2004-08-25 | PDF 788.9 KB |
| Antenna Foxconn | Parts List/Tune Up Info | 2004-07-19 | PDF 499.7 KB |
| Antenna WNC | Parts List/Tune Up Info | 2004-07-19 | PDF 464.2 KB |
| SAR Attachment 1 | RF Exposure Info | 2004-07-19 | PDF 337.3 KB |
| SAR Attachment 2 | RF Exposure Info | 2004-07-19 | PDF 510.3 KB |
| SAR Attachment 3 | RF Exposure Info | 2004-07-19 | PDF 504.3 KB |
| SAR Attachment 4 | RF Exposure Info | 2004-07-19 | PDF 844.5 KB |
| SAR Attachment 5 | RF Exposure Info | 2004-07-19 | PDF 467.1 KB |
| SAR Report | RF Exposure Info | 2004-07-19 | PDF 965.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 69.5 KB | |
| Schematics Metadata only | Schematics | PDF 655 KB | |
| Operational Description Metadata only | Operational Description | PDF 87.5 KB |
Application Information
| Application ID | ltDjUXvrUiFy3BYuoDTFsQ== |
|---|---|
| Final Action Date | 2004-11-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007091952 |
| Model | BRCM1013 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Broadcom 802.11g Mini PCI Card |
| Responsible Party | Anne Liang, Manager, Compliance Engineering, aliang@broadcom.com , 4089225890 |
| Agent | Mike Mike Mike, Compliance Certification Services, mheckrotte@ccsemc.com  , (408) 463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | In this class II permissive change filing, the device has been evaluated with specific host computer utilizing new antennas located at the top of the LCD. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. In order to allow user installation, the final host device must be utilized Bios Locking feature as documented in this filing. For use in portable RF exposure conditions per section 2.1093 of FCC rules, this device has been evaluated in specific notebook computers as documented in the original application and in this Class II permissive change filing . The highest reported SAR value under this FCC ID number is 0.088 W/kg-Body. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ltDjUXvrUiFy3BYuoDTFsQ== | 2004-11-24 | Class II permissive change or modification of presently authorized equipment |
| ZYpzyts/n8IU9w0M0yE/BQ== | 2004-08-25 | Class II permissive change or modification of presently authorized equipment |
| DFgPPxFmHjgsfxRMjdOToQ== | 2004-07-19 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1620000 | 15C |
Grants
TCB Grant - Application ZYpzyts/n8IU9w0M0yE/BQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/25/2004 Application Dated: 08/25/2004 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1013 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.162 |
| In this class II permissive change filing, the device has been evaluated with specific portable host computer to address section 2.1093 RF exposure requirements and with Bluetooth module ( FCC ID:QDS-BRCM1009) to address co-located transmitting requireemnts. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. In order to allow user installation, the final host device must be utilized Bios Locking feature as documented in this filing. For use in portable RF exposure conditions per section 2.1093 of FCC rules, this device has been evaluated in specific notebook computers as documented in the original application and in this Class II permissive change filing . The highest reported SAR value under this FCC ID number is 0.088 W/kg-Body. |
EAS Grant - Application ZYpzyts/n8IU9w0M0yE/BQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 08/25/2004 Application Dated: 08/25/2004 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1013 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.162 |
| In this class II permissive change filing, the device has been evaluated with specific portable host computer to address section 2.1093 RF exposure requirements and with Bluetooth module ( FCC ID:QDS-BRCM1009) to address co-located transmitting requireemnts. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. In order to allow user installation, the final host device must be utilized Bios Locking feature as documented in this filing. For use in portable RF exposure conditions per section 2.1093 of FCC rules, this device has been evaluated in specific notebook computers as documented in the original application and in this Class II permissive change filing . The highest reported SAR value under this FCC ID number is 0.088 W/kg-Body. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/24/2004 Application Dated: 11/24/2004 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1013 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadcom 802.11g Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.162 |
| In this class II permissive change filing, the device has been evaluated with specific host computer utilizing new antennas located at the top of the LCD. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. In order to allow user installation, the final host device must be utilized Bios Locking feature as documented in this filing. For use in portable RF exposure conditions per section 2.1093 of FCC rules, this device has been evaluated in specific notebook computers as documented in the original application and in this Class II permissive change filing . The highest reported SAR value under this FCC ID number is 0.088 W/kg-Body. |
EAS Grant - Application ltDjUXvrUiFy3BYuoDTFsQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 11/24/2004 Application Dated: 11/24/2004 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1013 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadcom 802.11g Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.162 |
| In this class II permissive change filing, the device has been evaluated with specific host computer utilizing new antennas located at the top of the LCD. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. In order to allow user installation, the final host device must be utilized Bios Locking feature as documented in this filing. For use in portable RF exposure conditions per section 2.1093 of FCC rules, this device has been evaluated in specific notebook computers as documented in the original application and in this Class II permissive change filing . The highest reported SAR value under this FCC ID number is 0.088 W/kg-Body. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/19/2004 Application Dated: 07/19/2004 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1013 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.162 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. In order to allow user installation, the final host device must be utilized Bios Locking feature as documented in this filing. For use in portable RF exposure conditions per section 2.1093 of FCC rules, this device has been evaluated in specific notebook computer as documented in this filing. The highest reported SAR value under this FCC ID number is 0.049 W/kg-Body. |
EAS Grant - Application DFgPPxFmHjgsfxRMjdOToQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 07/19/2004 Application Dated: 07/19/2004 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1013 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.162 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. In order to allow user installation, the final host device must be utilized Bios Locking feature as documented in this filing. For use in portable RF exposure conditions per section 2.1093 of FCC rules, this device has been evaluated in specific notebook computer as documented in this filing. The highest reported SAR value under this FCC ID number is 0.049 W/kg-Body. |
| Mail To: |