FCC ID QDS-BRCM1016
WLAN miniPCI card
by Broadcom Corporation
Grantee Code: QDS Product Code: BRCM1016
Latest application date: 2005-07-22
FCC ID Device Details
| FCC ID | QDS-BRCM1016 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QDS |
| Product Code | BRCM1016 |
| Applicant Business | Broadcom Corporation 🇺🇸 |
| Related Domains |  broadcom.com |
| Equipment Class | WLAN miniPCI card |
| Test Firm | Cetecom Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-07-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-04-18 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-04-08 |
| 2412-2462 MHz | Original Equipment | 2004-12-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Guide | Users Manual | 2004-12-09 | PDF 858.8 KB |
| Internal Photo | Internal Photos | 2005-04-18 | PDF 295 KB |
| Internal Photos | Internal Photos | 2004-12-09 | PDF 262.7 KB |
| External Photos | External Photos | 2005-07-22 | PDF 128.7 KB |
| External Phtotos | External Photos | 2004-12-09 | PDF 190.2 KB |
| Label | ID Label/Location Info | 2004-12-09 | PDF 147.1 KB |
| Test Setup Photos | Test Setup Photos | 2005-04-18 | PDF 251.8 KB |
| Test Setup Photos | Test Setup Photos | 2004-12-09 | PDF 398.5 KB |
| Test Report | Test Report | 2005-04-18 | PDF 282.6 KB |
| Antenna Info Phycom | Test Report | 2005-04-08 | PDF 414.2 KB |
| Test Report | Test Report | 2005-04-08 | PDF 557.4 KB |
| Test Report | Test Report | 2004-12-09 | PDF 513.5 KB |
| Modular Approval Request | Attestation Statements | 2004-12-09 | PDF 68.9 KB |
| Cover Letter | Cover Letter(s) | 2005-07-22 | PDF 56.5 KB |
| Cover Letter | Cover Letter(s) | 2005-04-18 | PDF 58.7 KB |
| Broadcom Declaration on worst Emissions | Cover Letter(s) | 2005-04-08 | PDF 118.3 KB |
| Broadcom Declaration on worst SAR | Cover Letter(s) | 2005-04-08 | PDF 141.1 KB |
| Cover Letter PCII Request | Cover Letter(s) | 2005-04-08 | PDF 55.3 KB |
| Confidentiality Request | Cover Letter(s) | 2004-12-09 | PDF 54.7 KB |
| SAR Report | RF Exposure Info | 2005-07-22 | PDF 215.2 KB |
| SAR Report Appendix A | RF Exposure Info | 2005-07-22 | PDF 52.3 KB |
| SAR Report Appendix B | RF Exposure Info | 2005-07-22 | PDF 613.9 KB |
| SAR Report Appendix C | RF Exposure Info | 2005-07-22 | PDF 192.7 KB |
| SAR Appendix A | RF Exposure Info | 2005-04-08 | PDF 45.4 KB |
| SAR Appendix B | RF Exposure Info | 2005-04-08 | PDF 610 KB |
| SAR Appendix C | RF Exposure Info | 2005-04-08 | PDF 192.8 KB |
| SAR Probe Calibration | RF Exposure Info | 2005-04-08 | PDF 2.8 MB |
| SAR Report | RF Exposure Info | 2005-04-08 | PDF 263.1 KB |
| RF Exposure Info | RF Exposure Info | 2004-12-09 | PDF 100.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 68.1 KB | |
| BOM Metadata only | Schematics | PDF 54.9 KB | |
| Circuit Diagrams Metadata only | Schematics | PDF 477.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 87.1 KB |
Application Information
| Application ID | fzV1mYqTS1N3Pr/iaFI1Ug== |
|---|---|
| Final Action Date | 2005-07-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007091952 |
| Model | BRCM1016 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN miniPCI card |
| Responsible Party | Anne Liang, Manager, Compliance Engineering, aliang@broadcom.com , 4089225890 |
| Test Firm | Lothar Schmidt, Cetecom Inc., lothar.schmidt@cetecomusa.com  , 408-586-6200 |
| TCB Email | gerald.schmidt@ict.cetecom.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific host configuration. Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. The highest reported SAR value is 0.262 W/kg in lap position. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fzV1mYqTS1N3Pr/iaFI1Ug== | 2005-07-22 | Class II permissive change or modification of presently authorized equipment |
| sLwgP0z3ToMUHVW4qZdMqQ== | 2005-04-18 | Class II permissive change or modification of presently authorized equipment |
| adR6ErDo9df050popD6duA== | 2005-04-08 | Class II permissive change or modification of presently authorized equipment |
| wlm4sAy4Rh5s1tHOQWlQwg== | 2004-12-09 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.7900000 | 15C |
Grants
TCB Grant - Application wlm4sAy4Rh5s1tHOQWlQwg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 12/09/2004 Application Dated: 12/09/2004 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1016 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN mini PCI card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.79 |
| Module Approval.Power Output listed is conducted.Approval is limited to OEM installation only.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application wlm4sAy4Rh5s1tHOQWlQwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 12/09/2004 Application Dated: 12/09/2004 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1016 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN mini PCI card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.79 |
| Module Approval.Power Output listed is conducted.Approval is limited to OEM installation only.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 04/18/2005 Application Dated: 04/18/2005 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1016 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN miniPCI card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.79 |
| Class II Permissive Change to allow an alternate PA and to add an antenna for mobile configurations. Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application sLwgP0z3ToMUHVW4qZdMqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 04/18/2005 Application Dated: 04/18/2005 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1016 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN miniPCI card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.79 |
| Class II Permissive Change to allow an alternate PA and to add an antenna for mobile configurations. Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 07/22/2005 Application Dated: 07/22/2005 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1016 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN miniPCI card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.79 |
| Class II Permissive Change to add specific host configuration. Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. The highest reported SAR value is 0.262 W/kg in lap position. |
EAS Grant - Application fzV1mYqTS1N3Pr/iaFI1Ug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 07/22/2005 Application Dated: 07/22/2005 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1016 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN miniPCI card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.79 |
| Class II Permissive Change to add specific host configuration. Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. The highest reported SAR value is 0.262 W/kg in lap position. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 04/08/2005 Application Dated: 04/08/2005 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1016 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN miniPCI card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.79 |
| Class II Permissive Change to add specific host configurations. Module Approval. Power Output listed is conducted.Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. The highest reported SAR value is 0.262 W/kg in lap position. |
EAS Grant - Application adR6ErDo9df050popD6duA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 04/08/2005 Application Dated: 04/08/2005 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1016 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN miniPCI card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.79 |
| Class II Permissive Change to add specific host configurations. Module Approval. Power Output listed is conducted.Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. The highest reported SAR value is 0.262 W/kg in lap position. |
| Mail To: |