FCC ID QDS-BRCM1019

FCC ID	QDS-BRCM1019
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	QDS
Product Code	BRCM1019
Applicant Business	Broadcom Corporation 🇺🇸
Related Domains	broadcom.com
Equipment Class	802.11ag Wireless LAN PCI-E Mini Card
Test Firm	CETECOM Inc.

Frequency Range	Application Purpose	Final Action Date
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2008-03-20
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2008-03-20
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-09-24
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2007-09-24
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-07-30
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2007-07-30
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2007-07-16
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-07-16
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2007-05-02
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2007-04-12
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-04-12
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2007-01-18
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-01-18
2412-2472 MHz	Class II permissive change or modification of presently authorized equipment	2006-04-27
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2006-04-27
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2006-04-21
2412-2472 MHz	Class II permissive change or modification of presently authorized equipment	2006-04-21
2412-2472 MHz	Class II permissive change or modification of presently authorized equipment	2006-02-08
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2006-02-08
2412-2472 MHz	Class II permissive change or modification of presently authorized equipment	2005-11-30
5180-5320 MHz	Class II permissive change or modification of presently authorized equipment	2005-11-30
5180-5320 MHz	Original Equipment	2005-08-03
2412-2472 MHz	Original Equipment	2005-08-03

Document	Type	Available	File
User Manual	Users Manual	2008-03-20	PDF 2 MB
Hawke User Manual	Users Manual	2007-09-24	PDF 1.8 MB
Parker User Manual	Users Manual	2007-09-24	PDF 2.7 MB
Spears User Manual	Users Manual	2007-09-24	PDF 2.3 MB
User Manual	Users Manual	2007-07-30	PDF 2.2 MB
User Manual Regulatory and RFx Staements	Users Manual	2007-07-30	PDF 11.8 KB
User Manual Regulatory and RFx Statements	Users Manual	2007-07-30	PDF 11.8 KB
Notebook Regulatory Guide	Users Manual	2007-07-16	PDF 1.9 MB
User Manual	Users Manual	2007-07-16	PDF 3.5 MB
Manual 434155	Users Manual	2007-04-12	PDF 281 KB
Manual 435748	Users Manual	2007-04-12	PDF 2.5 MB
Manual 435751	Users Manual	2007-04-12	PDF 526.9 KB
Manual 435813	Users Manual	2007-04-12	PDF 526.1 KB
Manual 435816	Users Manual	2007-04-12	PDF 2.6 MB
Regulatory Manual	Users Manual	2007-04-12	PDF 1.8 MB
Regulatory Info	Users Manual	2007-01-18	PDF 15.1 KB
USer Guide	Users Manual	2007-01-18	PDF 1 MB
User Guide	Users Manual	2007-01-18	PDF 1 MB
Users Guide	Users Manual	2006-04-21	PDF 586.2 KB
Users manual part A	Users Manual	2006-04-21	PDF 2.7 MB
Users manual part B	Users Manual	2006-04-21	PDF 2.3 MB
Users manual part C	Users Manual	2006-04-21	PDF 2.6 MB
Users manual part D	Users Manual	2006-04-21	PDF 2.4 MB
Users manual part E	Users Manual	2006-04-21	PDF 2.2 MB
Users manual part F	Users Manual	2006-04-21	PDF 2.2 MB
Users manual part G	Users Manual	2006-04-21	PDF 1.7 MB
Users Manual	Users Manual	2005-08-03	PDF 591.7 KB
Hawke Antenna Location	Internal Photos	2007-09-24	PDF 183.8 KB
Spears Antenna Location	Internal Photos	2007-09-24	PDF 64.1 KB
Internal Photos Antenna Routing	Internal Photos	2007-07-30	PDF 145.2 KB
Internal Photos	Internal Photos	2006-02-08	PDF 632.6 KB
Internal Photos	Internal Photos	2005-08-03	PDF 767.8 KB
External Photos	External Photos	2008-03-20	PDF 168.4 KB
External Photos Hawke Spears	External Photos	2007-09-24	PDF 186.1 KB
External Photos Parker	External Photos	2007-09-24	PDF 385.5 KB
External Photos	External Photos	2007-07-30	PDF 2.7 MB
External Photos	External Photos	2007-07-16	PDF 3.6 MB
External view Photos	External Photos	2007-07-16	PDF 1.1 MB
External Photos	External Photos	2007-01-18	PDF 932.8 KB
Antenna Photos	External Photos	2006-04-27	PDF 313.5 KB
External Photos	External Photos	2006-02-08	PDF 1.2 MB
External Photos	External Photos	2005-08-03	PDF 767.8 KB
Label	ID Label/Location Info	2007-07-30	PDF 12.6 KB
ID Label and Location Info	ID Label/Location Info	2007-07-16	PDF 315.8 KB
Label	ID Label/Location Info	2007-01-18	PDF 352.4 KB
Bluetooth Module Label	ID Label/Location Info	2006-04-21	PDF 530.6 KB
System Label	ID Label/Location Info	2006-04-21	PDF 35.3 KB
System Label BT	ID Label/Location Info	2006-04-21	PDF 530.6 KB
System label	ID Label/Location Info	2006-04-21	PDF 134.8 KB
ID Label Location Info	ID Label/Location Info	2005-08-03	PDF 94.4 KB
Anenna location	Operational Description	2006-04-21	PDF 101 KB
Antenna Description	Operational Description	2006-04-21	PDF 504.4 KB
Antenna location	Operational Description	2006-04-21	PDF 101 KB
Test Setup Photos	Test Setup Photos	2008-03-20	PDF 257.3 KB
Test Setup Photos Hawke Spears	Test Setup Photos	2007-09-24	PDF 323 KB
Test Setup Photos Parker	Test Setup Photos	2007-09-24	PDF 381.8 KB
Test Setup Photos	Test Setup Photos	2007-07-30	PDF 801.3 KB
Test Setup Photos	Test Setup Photos	2007-07-16	PDF 1 MB
Setup Photos	Test Setup Photos	2007-05-02	PDF 100.3 KB
Test Setup Photos	Test Setup Photos	2007-01-18	PDF 161.5 KB
Setup Photos	Test Setup Photos	2006-04-27	PDF 361.5 KB
Setup Photos	Test Setup Photos	2006-04-27	PDF 364.5 KB
Setup Photos	Test Setup Photos	2006-02-08	PDF 375.9 KB
Setup Photos	Test Setup Photos	2006-02-08	PDF 769.5 KB
Test Setup Photos	Test Setup Photos	2005-11-30	PDF 431.4 KB
Test Setup Photos	Test Setup Photos	2005-11-30	PDF 430.5 KB
Test Setup Photos	Test Setup Photos	2005-08-03	PDF 330.8 KB
Test Setup Photos	Test Setup Photos	2005-08-03	PDF 330.3 KB
Test Report	Test Report	2008-03-20	PDF 511.5 KB
for WNC Antenna	Test Report	2008-03-20	PDF 250.6 KB
for Yageo Antenna	Test Report	2008-03-20	PDF 250.1 KB
Summary Test Reports	Cover Letter(s)	2007-09-24	PDF 27.1 KB
Test Report Hawke Spears	Test Report	2007-09-24	PDF 587.3 KB
Test Report Hawke Spears UNII	Test Report	2007-09-24	PDF 330.1 KB
Test Report Parker	Test Report	2007-09-24	PDF 1.1 MB
Test Report Parker UNII	Test Report	2007-09-24	PDF 370 KB
Test Report	Test Report	2007-07-30	PDF 474.1 KB
Test Report	Test Report	2007-07-30	PDF 584.5 KB
SAR Test Report	RF Exposure Info	2007-07-16	PDF 362.7 KB
SAR Test Report Appendix 1 Plots	RF Exposure Info	2007-07-16	PDF 149.8 KB
SAR Test Report Appendix 2 Photos	RF Exposure Info	2007-07-16	PDF 241.5 KB
SAR Test Report Appendix 3 Calibration Data	RF Exposure Info	2007-07-16	PDF 236.2 KB
Test Report a mode	Test Report	2007-07-16	PDF 484.1 KB
Test Report a mode	Test Report	2007-07-16	PDF 322.8 KB
Test Report b g mode	Test Report	2007-07-16	PDF 498.4 KB
Test Report	Test Report	2007-05-02	PDF 457.9 KB
Test Report	Test Report	2007-01-18	PDF 204.3 KB
Test Report 2 GHz	Test Report	2007-01-18	PDF 321.2 KB
Test Report 5 GHz	Test Report	2007-01-18	PDF 178.6 KB
Test Report	Test Report	2006-04-27	PDF 1.6 MB
Test Report	Test Report	2006-04-27	PDF 1,009.6 KB
SAR Test Report	RF Exposure Info	2006-04-21	PDF 236 KB
Test Report	Test Report	2006-02-08	PDF 1.3 MB
Test Report	Test Report	2006-02-08	PDF 1.7 MB
Test Report	Test Report	2005-11-30	PDF 1.6 MB
Test Report	Test Report	2005-11-30	PDF 1,001.8 KB
Test Report	Test Report	2005-08-03	PDF 1.4 MB
Test Report	Test Report	2005-08-03	PDF 2.8 MB
WNC Antenna location and others	Attestation Statements	2008-03-20	PDF 355.6 KB
Yageo Antenna location and others	Attestation Statements	2008-03-20	PDF 1.1 MB
Antenna List Summary	Attestation Statements	2007-09-24	PDF 10.1 KB
Hawke Acon Antenna Spec	Attestation Statements	2007-09-24	PDF 1.1 MB
Parker Acon Antenna Spec and Location	Attestation Statements	2007-09-24	PDF 633.2 KB
Parker Amphenol Antenna Spec and Location	Attestation Statements	2007-09-24	PDF 346.6 KB
Spears Acon Antenna Spec	Attestation Statements	2007-09-24	PDF 378.5 KB
Antenna Distance	Attestation Statements	2007-07-30	PDF 65.4 KB
Antenna Information	Attestation Statements	2007-07-30	PDF 12 KB
Ad Hoc Attestation Letter	Cover Letter(s)	2007-05-02	PDF 53 KB
Statement	Attestation Statements	2007-01-18	PDF 18 KB
Correction request	Attestation Statements	2006-04-21	PDF 168.7 KB
PCII Letter	Cover Letter(s)	2008-03-20	PDF 18.2 KB
Request for Class II Permissive Change	Cover Letter(s)	2007-09-24	PDF 18.4 KB
Request for Class II Permissive Change	Cover Letter(s)	2007-07-30	PDF 18.3 KB
PC2 Request	Cover Letter(s)	2007-07-16	PDF 18.3 KB
Authorization Letter	Cover Letter(s)	2007-05-02	PDF 54.4 KB
Class II Permissive Change Letter	Cover Letter(s)	2007-05-02	PDF 23.4 KB
Class II Permissive Change Letter	Cover Letter(s)	2007-04-12	PDF 17.7 KB
Cover Letter	Cover Letter(s)	2007-01-18	PDF 18.1 KB
Class II Permissive Change Letter	Cover Letter(s)	2006-04-27	PDF 55.8 KB
C2PC Letter	Cover Letter(s)	2006-04-21	PDF 56.4 KB
C2PC Request Letter	Cover Letter(s)	2006-04-21	PDF 56.4 KB
reply to correspondence 30400	Cover Letter(s)	2006-04-21	PDF 11.9 KB
Authorization Letter	Cover Letter(s)	2006-02-08	PDF 28.3 KB
Class II Permissive Change Letter	Cover Letter(s)	2006-02-08	PDF 146.3 KB
Request for Confidentiality	Cover Letter(s)	2006-02-08	PDF 58.2 KB
Agency Letter	Cover Letter(s)	2005-11-30	PDF 28.3 KB
Class II change cover letter	Cover Letter(s)	2005-11-30	PDF 55.5 KB
Class II change letter	Cover Letter(s)	2005-11-30	PDF 55.5 KB
Authorization letter	Cover Letter(s)	2005-08-03	PDF 28.3 KB
Confidentiality Letter	Cover Letter(s)	2005-08-03	PDF 54.9 KB
Confidentiality letter	Cover Letter(s)	2005-08-03	PDF 54.9 KB
Modular Approval Cover Letter	Cover Letter(s)	2005-08-03	PDF 6.7 KB
Modular approval cover letter	Cover Letter(s)	2005-08-03	PDF 6.7 KB
TCB Q and A	Cover Letter(s)	2005-08-03	PDF 10.7 KB
TCB Q and A	Cover Letter(s)	2005-08-03	PDF 17.1 KB
SAR Report	RF Exposure Info	2008-03-20	PDF 238.3 KB
SAR Report Appendix A	RF Exposure Info	2008-03-20	PDF 200.6 KB
SAR Report Appendix B	RF Exposure Info	2008-03-20	PDF 132.7 KB
SAR Report Appendix C	RF Exposure Info	2008-03-20	PDF 503.2 KB
Hawke SAR Appendix A	RF Exposure Info	2007-09-24	PDF 123.3 KB
Hawke SAR Appendix B	RF Exposure Info	2007-09-24	PDF 95.5 KB
Hawke SAR Appendix C	RF Exposure Info	2007-09-24	PDF 503.9 KB
Hawke SAR Report	RF Exposure Info	2007-09-24	PDF 318.9 KB
Parker SAR Appendix A	RF Exposure Info	2007-09-24	PDF 187.9 KB
Parker SAR Appendix B	RF Exposure Info	2007-09-24	PDF 174.7 KB
Parker SAR Appendix C	RF Exposure Info	2007-09-24	PDF 504 KB
Parker SAR Appendix C	RF Exposure Info	2007-09-24	PDF 503.9 KB
Parker SAR Report	RF Exposure Info	2007-09-24	PDF 257.2 KB
SAR Probe Calibration Data	RF Exposure Info	2007-09-24	PDF 379.6 KB
Spears SAR Appendix A	RF Exposure Info	2007-09-24	PDF 123.3 KB
Spears SAR Appendix B	RF Exposure Info	2007-09-24	PDF 92.4 KB
Spears SAR Appendix C	RF Exposure Info	2007-09-24	PDF 503.9 KB
Spears SAR Report	RF Exposure Info	2007-09-24	PDF 312.5 KB
Calibration Data Part 2	RF Exposure Info	2007-07-30	PDF 1.3 MB
Calibration Data Part 3	RF Exposure Info	2007-07-30	PDF 295.8 KB
SAR Appendix Photos	RF Exposure Info	2007-07-30	PDF 119.1 KB
SAR Calibration Data Part 1	RF Exposure Info	2007-07-30	PDF 379.6 KB
SAR Calibration Data Part 3	RF Exposure Info	2007-07-30	PDF 1.3 MB
SAR Plots	RF Exposure Info	2007-07-30	PDF 204.8 KB
SAR Report	RF Exposure Info	2007-07-30	PDF 285.4 KB
SAR Probe 0016 Calibration	RF Exposure Info	2007-07-16	PDF 1.3 MB
SAR Probe M0024 Calibration	RF Exposure Info	2007-07-16	PDF 379.6 KB
SAR Validation Check	RF Exposure Info	2007-07-16	PDF 70.8 KB
Antennan 226	Parts List/Tune Up Info	2007-04-12	PDF 336.7 KB
Antennan 229	Parts List/Tune Up Info	2007-04-12	PDF 2.6 MB
MPE	RF Exposure Info	2007-04-12	PDF 91.1 KB
SAR Appendix A	RF Exposure Info	2007-01-18	PDF 305.6 KB
SAR Appendix B	RF Exposure Info	2007-01-18	PDF 135 KB
SAR Appendix C	RF Exposure Info	2007-01-18	PDF 336.9 KB
SAR Cal	RF Exposure Info	2007-01-18	PDF 1.3 MB
SAR Report	RF Exposure Info	2007-01-18	PDF 207.8 KB
Antenna	Parts List/Tune Up Info	2006-04-27	PDF 1.1 MB
2400 SAR appendix A	RF Exposure Info	2006-04-21	PDF 44.3 KB
2400 SAR appendix B	RF Exposure Info	2006-04-21	PDF 402 KB
2400 SAR appendix C	RF Exposure Info	2006-04-21	PDF 231.4 KB
2400 SAR report	RF Exposure Info	2006-04-21	PDF 232.4 KB
2400 main antenna side plot	RF Exposure Info	2006-04-21	PDF 69.8 KB
5000 SAR appendix A	RF Exposure Info	2006-04-21	PDF 423.9 KB
5000 SAR report	RF Exposure Info	2006-04-21	PDF 236.6 KB
5000 main antenna side plot	RF Exposure Info	2006-04-21	PDF 69.8 KB
SAR 2400MHz Appendix A	RF Exposure Info	2006-04-21	PDF 39 KB
SAR 2400MHz Appendix B	RF Exposure Info	2006-04-21	PDF 407.8 KB
SAR 2400MHz Appendix C	RF Exposure Info	2006-04-21	PDF 231.4 KB
SAR 2400MHz Report	RF Exposure Info	2006-04-21	PDF 232 KB
SAR 5000MHz Appendix A	RF Exposure Info	2006-04-21	PDF 61.1 KB
SAR 5000MHz Appendix B	RF Exposure Info	2006-04-21	PDF 407.9 KB
SAR 5000MHz Report	RF Exposure Info	2006-04-21	PDF 236 KB
SAR 5000MHz appendix C	RF Exposure Info	2006-04-21	PDF 37.4 KB
SAR Appendix A	RF Exposure Info	2006-04-21	PDF 61.1 KB
SAR Appendix B	RF Exposure Info	2006-04-21	PDF 407.9 KB
SAR Appendix C	RF Exposure Info	2006-04-21	PDF 37.4 KB
SAR Probe Calibration	RF Exposure Info	2006-04-21	PDF 2.8 MB
SAR probe cal	RF Exposure Info	2006-04-21	PDF 2.4 MB
SAR report	RF Exposure Info	2006-04-21	PDF 236.6 KB
SAR report appendix A	RF Exposure Info	2006-04-21	PDF 70.9 KB
SAR report appendix B	RF Exposure Info	2006-04-21	PDF 423.9 KB
SAR report appendix C	RF Exposure Info	2006-04-21	PDF 37.4 KB
Anatenna Specification	Parts List/Tune Up Info	2005-11-30	PDF 257.6 KB
Antenna Specification	Parts List/Tune Up Info	2005-11-30	PDF 257.6 KB
Antenna Specification 2G	Parts List/Tune Up Info	2005-08-03	PDF 232.2 KB
Antenna Specification 5G	Parts List/Tune Up Info	2005-08-03	PDF 501.5 KB
RF Exposure Info MPE	RF Exposure Info	2005-08-03	PDF 157.2 KB
Schematics Metadata only	Schematics		PDF 824.2 KB

Application ID	aibe0hGSvF50tw0bdx8lJA==
Final Action Date	2008-03-20
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0007091952
Model	-BRCM1019
Frequency Range	5180-5320 MHz
Equipment Class	NII - Unlicensed National Information Infrastructure TX
Device Description	802.11ag Wireless LAN PCI-E Mini Card
Responsible Party	Daniel Lawless, Director of Engineering, System Operations, ComplianceEngineering-list-CA-list@broadcom.com , 408-543-3300
Test Firm	Franz Engert, CETECOM Inc., franz.engert@cetecom.com , 408-586-6249
TCB Email	gerald.schmidt@ict.cetecom.de
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Class II Permissive Change to allow portable configuration in specific host as described in this filling. Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

Application ID	Date	Purpose
aibe0hGSvF50tw0bdx8lJA==	2008-03-20	Class II permissive change or modification of presently authorized equipment
BJVkHBkRxGOWjYqQTWC2XA==	2008-03-20	Class II permissive change or modification of presently authorized equipment
eSD2zBrdp9vC0RV5BHT4IQ==	2007-09-24	Class II permissive change or modification of presently authorized equipment
XiVquie6UuDK8GokPuh9sA==	2007-09-24	Class II permissive change or modification of presently authorized equipment
Rsp2Qy9/u1a/dxuximfi8g==	2007-07-30	Class II permissive change or modification of presently authorized equipment
LHGcCHwgqySmXNPXOw0voA==	2007-07-30	Class II permissive change or modification of presently authorized equipment
fPwnkqK2mXnlsDh8iatFCQ==	2007-07-16	Class II permissive change or modification of presently authorized equipment
5exJKlfLeDNZZAeqeJ6L3Q==	2007-07-16	Class II permissive change or modification of presently authorized equipment
Ah2jAJQK4UbFNbWFmGIEvw==	2007-05-02	Class II permissive change or modification of presently authorized equipment
z0GkaHIlfhuNImX9uvRAiQ==	2007-04-12	Class II permissive change or modification of presently authorized equipment
2KMCPMEP19hcokDZgmeecg==	2007-04-12	Class II permissive change or modification of presently authorized equipment
M4eG/t1MsNMn4TRy0YDxJQ==	2007-01-18	Class II permissive change or modification of presently authorized equipment
Dg3Yy09M6AnZTEgi9iB+KQ==	2007-01-18	Class II permissive change or modification of presently authorized equipment
jhOqNuXy0KmpMYKEo6PCcQ==	2006-04-27	Class II permissive change or modification of presently authorized equipment
MSyc+1DKJO5hRl35bBvYaA==	2006-04-27	Class II permissive change or modification of presently authorized equipment
mpfzN+sByrUAwsXhkN+pHg==	2006-04-21	Class II permissive change or modification of presently authorized equipment
bMDJG/H4+w6KAmOvqRF4iQ==	2006-04-21	Class II permissive change or modification of presently authorized equipment
lIZBaex3XOtSCcvbjqpDWw==	2006-02-08	Class II permissive change or modification of presently authorized equipment
AXv4aeilZg1u4EiFRa6UFA==	2006-02-08	Class II permissive change or modification of presently authorized equipment
KX1N4h4hOC+rRKF70szwLA==	2005-11-30	Class II permissive change or modification of presently authorized equipment
IbLDXhXJhaP0tCGAJ7cGOw==	2005-11-30	Class II permissive change or modification of presently authorized equipment
vEWWzb5AjpFsOuCiURHnUQ==	2005-08-03	Original Equipment
AA4GzPDgKrLG+F/k7HJvqw==	2005-08-03	Original Equipment

Frequency	Output	Rules	Grant Notes
2412-2472 MHz	0.0794	15C
2412-2472 MHz	0.4325	15C	CC
2412-2462 MHz	0.4325	15C	CC
2412-2462 MHz	0.4325	15C
5180-5320 MHz	0.0448000	15E	CC
5180-5320 MHz	0.0501000	15E
5180-5320 MHz	0.0448000	15E	CC, ND
5180-5320 MHz	0.0448000	15E
5745-5825 MHz	0.0501	15C
5745-5825 MHz	0.2328	15C	CC
5745-5825 MHz	0.2328	15C

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 04/12/2007

Application Dated: 04/12/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lapheld and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 04/12/2007

Application Dated: 04/12/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lapheld and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

EA653071

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 09/24/2007

Application Dated: 09/24/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 09/24/2007

Application Dated: 09/24/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application vEWWzb5AjpFsOuCiURHnUQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 08/03/2005

Application Dated: 08/03/2005

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 08/03/2005

Application Dated: 08/03/2005

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

EA617478

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 07/30/2007

Application Dated: 07/30/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 07/30/2007

Application Dated: 07/30/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

EA338464

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 04/27/2006

Application Dated: 04/27/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Class II permissive change filing. Grant conditions from filings under this FCC ID are applicable, also the following concerning this Class II permissive change: Only the antenna(s) documented in this filing and installed in the manner specified may be used with this device. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This composite device is restricted for indoor use only in 5150-5250MHz band.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 04/27/2006

Application Dated: 04/27/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Class II permissive change filing. Grant conditions from filings under this FCC ID are applicable, also the following concerning this Class II permissive change: Only the antenna(s) documented in this filing and installed in the manner specified may be used with this device. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This composite device is restricted for indoor use only in 5150-5250MHz band.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mpfzN+sByrUAwsXhkN+pHg==

This application does not exist.

EAS Grant - Application mpfzN+sByrUAwsXhkN+pHg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 04/21/2006

Application Dated: 01/09/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	801.11ag Wireless LAN PCI-E-Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0 - 5320.0	0.0501

Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was demonstrated for device with specific antenna-system in specific computer operating in portable RF exposure conditions as described in this filing; other antenna configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.24 W/kg; 5.2 GHz-band 0.72 W/kg; 5.8 GHz-band 1.03 W/kg.

TCB Grant - Application M4eG/t1MsNMn4TRy0YDxJQ==

Mail To:

Lothar Schmidt,

CETECOM Inc.

411 Dixon Landing

Milpitas, CA 95035

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 01/18/2007

Application Dated: 01/18/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0 - 5320.0	0.0448

Class II permissive change to allow portable configuration.

Modular approval.

Power output listed is conducted.

This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID.

OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration (associated FCC ID: QDS-BRCM1018) for lapheld and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 01/18/2007

Application Dated: 01/18/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0 - 5320.0	0.0448

Class II permissive change to allow portable configuration.

Modular approval.

Power output listed is conducted.

This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID.

OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration (associated FCC ID: QDS-BRCM1018) for lapheld and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

Mail To:

EA602663

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 02/08/2006

Application Dated: 02/08/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	Broadcom 802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2472.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II permissive change filing. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 02/08/2006

Application Dated: 02/08/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	Broadcom 802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2472.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II permissive change filing. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LHGcCHwgqySmXNPXOw0voA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 07/30/2007

Application Dated: 07/30/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 07/30/2007

Application Dated: 07/30/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:

EA759125

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 11/30/2005

Application Dated: 11/30/2005

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	Broadcom 802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2472.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II permissive change filing. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 11/30/2005

Application Dated: 11/30/2005

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	Broadcom 802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2472.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II permissive change filing. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application jhOqNuXy0KmpMYKEo6PCcQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 04/27/2006

Application Dated: 04/27/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2472.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II permissive change filing. Grant conditions from filings under this FCC ID are applicable, also the following concerning this Class II permissive change: Only the antenna(s) documented in this filing and installed in the manner specified may be used with this device. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 04/27/2006

Application Dated: 04/27/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2472.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II permissive change filing. Grant conditions from filings under this FCC ID are applicable, also the following concerning this Class II permissive change: Only the antenna(s) documented in this filing and installed in the manner specified may be used with this device. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IbLDXhXJhaP0tCGAJ7cGOw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 11/30/2005

Application Dated: 11/30/2005

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Broadcom 802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Class II permissive change filing. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This composite device is restricted for indoor use only in 5150-5250MHz band.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 11/30/2005

Application Dated: 11/30/2005

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Broadcom 802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Class II permissive change filing. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This composite device is restricted for indoor use only in 5150-5250MHz band.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application fPwnkqK2mXnlsDh8iatFCQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 07/16/2007

Application Dated: 07/16/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 07/16/2007

Application Dated: 07/16/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:

EA206783

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 09/24/2007

Application Dated: 09/24/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II Permissive Change to allow portable configuration in specific hosts as described in this filling.

Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 09/24/2007

Application Dated: 09/24/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II Permissive Change to allow portable configuration in specific hosts as described in this filling.

Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Dg3Yy09M6AnZTEgi9iB+KQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 01/18/2007

Application Dated: 01/18/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.4325
	15C	5745.0 - 5825.0	0.2328

Class II permissive change to allow portable configuration.

Modular approval.

Power output listed is conducted.

This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID.

OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration (associated FCC ID: QDS-BRCM1018) for lapheld and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 01/18/2007

Application Dated: 01/18/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.4325
	15C	5745.0 - 5825.0	0.2328

Class II permissive change to allow portable configuration.

Modular approval.

Power output listed is conducted.

This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID.

OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration (associated FCC ID: QDS-BRCM1018) for lapheld and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

Mail To:

EA956003

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 04/21/2006

Application Dated: 12/22/2005

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2472.0	0.0794
	15C	5745.0 - 5825.0	0.0501

Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was demonstrated for device with specific antenna-system in specific computer operating in portable RF exposure conditions as described in this filing; other antenna configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.24 W/kg; 5.2 GHz-band 0.72 W/kg; 5.8 GHz-band 1.03 W/kg.

TCB Grant - Application BJVkHBkRxGOWjYqQTWC2XA==

Mail To:

Lothar Schmidt, Technical Manager

CETECOM Inc.

411 Dixon Landing RD

Milpitas, CA 95035

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 03/20/2008

Application Dated: 03/20/2008

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II Permissive Change to allow portable configuration in specific hosts as described in this filling.

Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 03/20/2008

Application Dated: 03/20/2008

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.4325
CC	15C	5745.0 - 5825.0	0.2328

Class II Permissive Change to allow portable configuration in specific hosts as described in this filling.

Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application AXv4aeilZg1u4EiFRa6UFA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 02/08/2006

Application Dated: 02/08/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Broadcom 802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Class II permissive change filing. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This composite device is restricted for indoor use only in 5150-5250MHz band.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 02/08/2006

Application Dated: 02/08/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Broadcom 802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5320.0	0.0448

Class II permissive change filing. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This composite device is restricted for indoor use only in 5150-5250MHz band.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application aibe0hGSvF50tw0bdx8lJA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 03/20/2008

Application Dated: 03/20/2008

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 03/20/2008

Application Dated: 03/20/2008

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag Wireless LAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band.

For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.88 W/kg; 5.2 GHz-band 1.20 W/kg; 5.8 GHz-band 1.40 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Ah2jAJQK4UbFNbWFmGIEvw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 05/02/2007

Application Dated: 05/02/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Broadcom 802.11ag WLAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II permissive change filing. Modular approval. Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lapheld and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 05/02/2007

Application Dated: 05/02/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1019

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Broadcom 802.11ag WLAN PCI-E Mini Card
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0 - 5320.0	0.0448

Class II permissive change filing. Modular approval. Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client only without Radar Detection. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter op This module may only be installed by the OEM or an OEM integrator. This composite device is restricted to and must be marketed for indoor use only in 5150-5250 MHz band. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in filings under this FCC ID. OEM integrators, end-users, and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lapheld and other positions as shown in filings under this FCC ID. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.495 W/kg; 5.2 GHz-band 1.19 W/kg; 5.8 GHz-band 1.152 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:

EA366046

802.11ag Wireless LAN PCI-E Mini Card

by Broadcom Corporation

Grantee Code: QDS Product Code: BRCM1019

Latest application date: 2008-03-20

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application z0GkaHIlfhuNImX9uvRAiQ==

EAS Grant - Application z0GkaHIlfhuNImX9uvRAiQ==

TCB Grant - Application XiVquie6UuDK8GokPuh9sA==

EAS Grant - Application XiVquie6UuDK8GokPuh9sA==

TCB Grant - Application vEWWzb5AjpFsOuCiURHnUQ==

EAS Grant - Application vEWWzb5AjpFsOuCiURHnUQ==

TCB Grant - Application Rsp2Qy9/u1a/dxuximfi8g==

EAS Grant - Application Rsp2Qy9/u1a/dxuximfi8g==

TCB Grant - Application MSyc+1DKJO5hRl35bBvYaA==

EAS Grant - Application MSyc+1DKJO5hRl35bBvYaA==

TCB Grant - Application mpfzN+sByrUAwsXhkN+pHg==

EAS Grant - Application mpfzN+sByrUAwsXhkN+pHg==

TCB Grant - Application M4eG/t1MsNMn4TRy0YDxJQ==

EAS Grant - Application M4eG/t1MsNMn4TRy0YDxJQ==

TCB Grant - Application lIZBaex3XOtSCcvbjqpDWw==

EAS Grant - Application lIZBaex3XOtSCcvbjqpDWw==

TCB Grant - Application LHGcCHwgqySmXNPXOw0voA==

EAS Grant - Application LHGcCHwgqySmXNPXOw0voA==

TCB Grant - Application KX1N4h4hOC+rRKF70szwLA==

EAS Grant - Application KX1N4h4hOC+rRKF70szwLA==

TCB Grant - Application jhOqNuXy0KmpMYKEo6PCcQ==

EAS Grant - Application jhOqNuXy0KmpMYKEo6PCcQ==

TCB Grant - Application IbLDXhXJhaP0tCGAJ7cGOw==

EAS Grant - Application IbLDXhXJhaP0tCGAJ7cGOw==

TCB Grant - Application fPwnkqK2mXnlsDh8iatFCQ==

EAS Grant - Application fPwnkqK2mXnlsDh8iatFCQ==

TCB Grant - Application eSD2zBrdp9vC0RV5BHT4IQ==

EAS Grant - Application eSD2zBrdp9vC0RV5BHT4IQ==

TCB Grant - Application Dg3Yy09M6AnZTEgi9iB+KQ==

EAS Grant - Application Dg3Yy09M6AnZTEgi9iB+KQ==

TCB Grant - Application bMDJG/H4+w6KAmOvqRF4iQ==

EAS Grant - Application bMDJG/H4+w6KAmOvqRF4iQ==

TCB Grant - Application BJVkHBkRxGOWjYqQTWC2XA==

EAS Grant - Application BJVkHBkRxGOWjYqQTWC2XA==

TCB Grant - Application AXv4aeilZg1u4EiFRa6UFA==

EAS Grant - Application AXv4aeilZg1u4EiFRa6UFA==

TCB Grant - Application aibe0hGSvF50tw0bdx8lJA==

EAS Grant - Application aibe0hGSvF50tw0bdx8lJA==

TCB Grant - Application Ah2jAJQK4UbFNbWFmGIEvw==

EAS Grant - Application Ah2jAJQK4UbFNbWFmGIEvw==