FCC ID QDS-BRCM1022-H

FCC ID	QDS-BRCM1022-H
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	QDS
Product Code	BRCM1022H
Applicant Business	Broadcom Corporation 🇺🇸
Related Domains	broadcom.com
Equipment Class	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Test Firm	Compliance Certification Services

Frequency Range	Application Purpose	Final Action Date
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-07-26
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2007-07-16
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-07-16
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2007-06-18
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-04-13
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2007-04-13
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2007-03-14
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-03-14
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2007-03-14
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2007-03-14
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2006-12-08
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2006-12-08
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1022 Grant Date: 06/14/2006	2006-08-18
2412-2462 MHz	Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1022 Grant Date: 06/14/2006	2006-08-18

Document	Type	Available	File
Notebook Regulatory Guide	Users Manual	2007-07-16	PDF 1.9 MB
User Manual	Users Manual	2007-07-16	PDF 3.5 MB
Manual 434155	Users Manual	2007-04-13	PDF 281 KB
Manual 435748	Users Manual	2007-04-13	PDF 2.5 MB
Manual 435751	Users Manual	2007-04-13	PDF 526.9 KB
Manual 435813	Users Manual	2007-04-13	PDF 526.1 KB
Manual 435816	Users Manual	2007-04-13	PDF 2.6 MB
Regulatory Manual	Users Manual	2007-04-13	PDF 1.8 MB
Manual 435748	Users Manual	2007-03-14	PDF 2.5 MB
Manual 435748	Users Manual	2007-03-14	PDF 2.5 MB
Manual 435816	Users Manual	2007-03-14	PDF 2.6 MB
Regulatory Statement	Users Manual	2006-12-08	PDF 7 KB
User Manual 1	Users Manual	2006-12-08	PDF 3.8 MB
User Manual 2	Users Manual	2006-12-08	PDF 2.9 MB
Internal Photos	Internal Photos	2007-07-16	PDF 3.4 MB
External Photos	External Photos	2007-07-16	PDF 1.1 MB
External Photos	External Photos	2006-12-08	PDF 421.3 KB
Host Photos	External Photos	2006-12-08	PDF 191.9 KB
External Photos	External Photos	2006-08-18	PDF 470.6 KB
ID Label and Location Info	ID Label/Location Info	2007-07-16	PDF 311.7 KB
Host Label	ID Label/Location Info	2006-12-08	PDF 9.5 KB
FCC ID Label and Location Info	ID Label/Location Info	2006-08-18	PDF 77.7 KB
FCC ID label	ID Label/Location Info	2006-08-18	PDF 77.7 KB
Setup Photos	Test Setup Photos	2007-07-26	PDF 117.1 KB
Test Setup Photos	Test Setup Photos	2007-07-16	PDF 1 MB
Setup Photos	Test Setup Photos	2007-06-18	PDF 91.7 KB
DTS Setup Photos	Test Setup Photos	2006-12-08	PDF 562.3 KB
UNII Setup Photos	Test Setup Photos	2006-12-08	PDF 687.5 KB
Report	Test Report	2007-07-26	PDF 450.6 KB
SAR Test Report	RF Exposure Info	2007-07-16	PDF 443.1 KB
SAR Test Report Appendix 1 Plots	RF Exposure Info	2007-07-16	PDF 372.3 KB
SAR Test Report Appendix 2 Photos	RF Exposure Info	2007-07-16	PDF 291.5 KB
SAR Test Report Appendix 3 Calibration Data	RF Exposure Info	2007-07-16	PDF 236.5 KB
Test Report 2400 bg mode	Test Report	2007-07-16	PDF 504.1 KB
Test Report 2400 n mode 20MHz	Test Report	2007-07-16	PDF 326.2 KB
Test Report 2400 n mode 40MHz	Test Report	2007-07-16	PDF 343.5 KB
Test Report 5800 a mode	Test Report	2007-07-16	PDF 339.9 KB
Test Report 5800 n mode 20MHz	Test Report	2007-07-16	PDF 304.8 KB
Test Report 5800 n mode 400MHz	Test Report	2007-07-16	PDF 277.6 KB
Test Report a mode	Test Report	2007-07-16	PDF 484.3 KB
Test Report n mode 20MHz	Test Report	2007-07-16	PDF 334.8 KB
Test Report n mode 40MHz	Test Report	2007-07-16	PDF 336.1 KB
Test Report	Test Report	2007-06-18	PDF 622.9 KB
DTS Report	Test Report	2006-12-08	PDF 2 MB
UNII Report	Test Report	2006-12-08	PDF 1.2 MB
Authorization Letter	Cover Letter(s)	2007-07-26	PDF 80.6 KB
Class II Permissive Change Letter	Cover Letter(s)	2007-07-26	PDF 21.5 KB
Request for Confidentiality	Cover Letter(s)	2007-07-26	PDF 19.7 KB
PC2 Request	Cover Letter(s)	2007-07-16	PDF 20.8 KB
Authorization Letter	Cover Letter(s)	2007-06-18	PDF 96.1 KB
Class II Permissive Change Letter	Cover Letter(s)	2007-06-18	PDF 25.5 KB
TCB Q and A	Cover Letter(s)	2007-06-18	PDF 12.5 KB
Authorization Letter	Cover Letter(s)	2007-04-13	PDF 54.4 KB
Class II Permissive Change Letter	Cover Letter(s)	2007-04-13	PDF 18 KB
Class II Permissive Change Letter	Cover Letter(s)	2007-03-14	PDF 19.9 KB
MPE	Cover Letter(s)	2007-03-14	PDF 111.6 KB
MPE	Cover Letter(s)	2007-03-14	PDF 111.2 KB
Class II Permissive Change Letter	Cover Letter(s)	2006-12-08	PDF 22.1 KB
Request for Confidentiality	Cover Letter(s)	2006-12-08	PDF 53.8 KB
Agency Letter	Cover Letter(s)	2006-08-18	PDF 54.4 KB
Application letter	Cover Letter(s)	2006-08-18	PDF 17 KB
SAR Probe 0016 Calibration	RF Exposure Info	2007-07-16	PDF 1.3 MB
SAR Probe M0024 Calibration	RF Exposure Info	2007-07-16	PDF 379.6 KB
SAR Vaidation Check	RF Exposure Info	2007-07-16	PDF 70.8 KB
SAR Validation Check	RF Exposure Info	2007-07-16	PDF 70.8 KB
Antennan 226	Parts List/Tune Up Info	2007-04-13	PDF 336.7 KB
Antennan 229	Parts List/Tune Up Info	2007-04-13	PDF 2.6 MB
MPE	RF Exposure Info	2007-04-13	PDF 38.6 KB
Antenna DT15	Parts List/Tune Up Info	2007-03-14	PDF 2.6 MB
Antenna Tecate	Parts List/Tune Up Info	2007-03-14	PDF 399.4 KB
Antennan D	Parts List/Tune Up Info	2007-03-14	PDF 2.6 MB
Antennan DT15	Parts List/Tune Up Info	2007-03-14	PDF 2.6 MB
Antennan T	Parts List/Tune Up Info	2007-03-14	PDF 399.4 KB
Antennan Tecate	Parts List/Tune Up Info	2007-03-14	PDF 399.4 KB
Antenna location photos	Parts List/Tune Up Info	2006-12-08	PDF 255.4 KB
Antennan Specification	Parts List/Tune Up Info	2006-12-08	PDF 461.1 KB
SAR Report	RF Exposure Info	2006-12-08	PDF 1.4 MB
SAR attachment 1	RF Exposure Info	2006-12-08	PDF 988.9 KB
SAR attachment 2 1	RF Exposure Info	2006-12-08	PDF 1.9 MB
SAR attachment 2 2	RF Exposure Info	2006-12-08	PDF 1.8 MB
SAR attachment 2 3	RF Exposure Info	2006-12-08	PDF 1.5 MB
SAR attachment 3	RF Exposure Info	2006-12-08	PDF 1.1 MB
SAR attachment 4	RF Exposure Info	2006-12-08	PDF 690.2 KB
SAR attachment 5	RF Exposure Info	2006-12-08	PDF 792.2 KB
SAR attachment 6	RF Exposure Info	2006-12-08	PDF 206.7 KB
WLAN Antenna Information	Parts List/Tune Up Info	2006-12-08	PDF 461.1 KB
Schematics Metadata only	Schematics		PDF 922.9 KB
Operational Description Metadata only	Operational Description		PDF 105.2 KB
Operational Description SAR Metadata only	Operational Description		PDF 114.5 KB
BOM Metadata only	Parts List/Tune Up Info		PDF 53.5 KB
Parts List Metadata only	Parts List/Tune Up Info		PDF 53.5 KB

Application ID	Lf7SiUg+5QgylCMB1Sf3fA==
Final Action Date	2007-07-26
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0007091952
Model	-BRCM1022-H
Frequency Range	2412-2462 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Responsible Party	Daniel Lawless, Director of Engineering, System Operations, ComplianceEngineering-list-CA-list@broadcom.com , 408-543-3300
Test Firm	Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
TCB Email	mkuo@ccsemc.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Limited Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Class II Permissive Change to improve band edge channel power in 802.11g mode for mobile operation. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Application ID	Date	Purpose
Lf7SiUg+5QgylCMB1Sf3fA==	2007-07-26	Class II permissive change or modification of presently authorized equipment
VUDiINiz4LgqkTOqZeGLYA==	2007-07-16	Class II permissive change or modification of presently authorized equipment
P7XaQ351GPh0gcFacskCGQ==	2007-07-16	Class II permissive change or modification of presently authorized equipment
M/JqI/uMAsSt6rQ4RKwv0A==	2007-06-18	Class II permissive change or modification of presently authorized equipment
khDgl7lXlhRIbQIMjb5qkQ==	2007-04-13	Class II permissive change or modification of presently authorized equipment
TdPWkcJw72IFqQA0CN5FTw==	2007-04-13	Class II permissive change or modification of presently authorized equipment
fJIK6EW8PbjOQXccL4+LZg==	2007-03-14	Class II permissive change or modification of presently authorized equipment
Z/oWRhiBGZiHH+Cwmmsrcg==	2007-03-14	Class II permissive change or modification of presently authorized equipment
1YA67bGB1KQpHL9q7pP7xQ==	2007-03-14	Class II permissive change or modification of presently authorized equipment
/v64cZv+G/ia2euAlSmwJQ==	2007-03-14	Class II permissive change or modification of presently authorized equipment
muYOe7rVqbDs2JEFexY6+Q==	2006-12-08	Class II permissive change or modification of presently authorized equipment
fbkvF9ArJ2CcJEXZXPNOBA==	2006-12-08	Class II permissive change or modification of presently authorized equipment
b2Rz7irNAPkhg5KGe7LquQ==	2006-08-18	Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1022 Grant Date: 06/15/2006
MmCAezdD35n4rZAwd6LCuw==	2006-08-18	Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1022 Grant Date: 06/14/2006
63pc+L+v5WloYyhgsiuUhA==	2006-08-18	Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1022 Grant Date: 06/14/2006

Frequency	Output	Rules	Grant Notes
		15B	CC
2412-2462 MHz	0.4	15C	36, CC
2412-2462 MHz	0.489	15C	36, CC, MO
5180-5240 MHz	0.01064	15E	36, CC
5180-5240 MHz	0.038	15E	36, CC, MO
5260-5320 MHz	0.088	15E	36, CC
5260-5320 MHz	0.088	15E	36, CC, ND
5260-5320 MHz	0.107	15E	36, CC, MO
5260-5320 MHz	0.107	15E	36, CC, MO, ND
5745-5825 MHz	0.265	15C	36, CC
5745-5825 MHz	0.406	15C	36, CC, MO

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 03/14/2007

Application Dated: 03/14/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissve change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 03/14/2007

Application Dated: 03/14/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissve change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

EA151539

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 07/16/2007

Application Dated: 07/16/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC ND	15E	5260.0 - 5320.0	0.088
36 CC MO ND	15E	5260.0 - 5320.0	0.107

Class II permissive change: Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

5.15-5.25 GHz band is limited for indoor operation only.

SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 07/16/2007

Application Dated: 07/16/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC ND	15E	5260.0 - 5320.0	0.088
36 CC MO ND	15E	5260.0 - 5320.0	0.107

Class II permissive change: Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

5.15-5.25 GHz band is limited for indoor operation only.

SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:

EA685055

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 04/13/2007

Application Dated: 04/13/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	QDS-BRCM1022-H
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 04/13/2007

Application Dated: 04/13/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	QDS-BRCM1022-H
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

EA949577

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 07/16/2007

Application Dated: 07/16/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	5745.0 - 5825.0	0.406

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change to add a portable configuration in specific host.

WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only.

For operation in mobile RF exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 07/16/2007

Application Dated: 07/16/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	5745.0 - 5825.0	0.406

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change to add a portable configuration in specific host.

WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only.

For operation in mobile RF exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

EA283231

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 12/08/2006

Application Dated: 12/08/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n Wireless LAN PCI-E MiniCard
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Class II permissive change filing. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power in MIMO mode. The maximum combined peak conducted output power in Legacy mode is: 0.753W in 2.4G band and 0.55W in 5.8G band. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID: QDS-BRCM1018), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 12/08/2006

Application Dated: 12/08/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n Wireless LAN PCI-E MiniCard
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Class II permissive change filing. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power in MIMO mode. The maximum combined peak conducted output power in Legacy mode is: 0.753W in 2.4G band and 0.55W in 5.8G band. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID: QDS-BRCM1018), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MmCAezdD35n4rZAwd6LCuw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 08/18/2006

Application Dated: 08/18/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 08/18/2006

Application Dated: 08/18/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application M/JqI/uMAsSt6rQ4RKwv0A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 06/18/2007

Application Dated: 06/18/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC ND	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO ND	15E	5260.0 - 5320.0	0.107

Class II permissve change: Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

5.15-5.25 GHz band is limited for indoor operation only.

SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID: QDS-BRCM1018), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 06/18/2007

Application Dated: 06/18/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC ND	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO ND	15E	5260.0 - 5320.0	0.107

Class II permissve change: Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

5.15-5.25 GHz band is limited for indoor operation only.

SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID: QDS-BRCM1018), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:

EA569271

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 07/26/2007

Application Dated: 07/26/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Class II Permissive Change to improve band edge channel power in 802.11g mode for mobile operation. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 07/26/2007

Application Dated: 07/26/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Class II Permissive Change to improve band edge channel power in 802.11g mode for mobile operation. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

EA855172

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 04/13/2007

Application Dated: 04/13/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 04/13/2007

Application Dated: 04/13/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

EA858437

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 03/14/2007

Application Dated: 03/14/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissve change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 03/14/2007

Application Dated: 03/14/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissve change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

EA913970

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 12/08/2006

Application Dated: 12/08/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Class II permissive change filing. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID: QDS-BRCM1018), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 12/08/2006

Application Dated: 12/08/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Class II permissive change filing. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID: QDS-BRCM1018), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.28 W/kg; 5.2 GHz-band 1.37 W/kg; 5.8 GHz-band 1.488 W/kg.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application b2Rz7irNAPkhg5KGe7LquQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 08/18/2006

Application Dated: 08/18/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 08/18/2006

Application Dated: 08/18/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 63pc+L+v5WloYyhgsiuUhA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 08/18/2006

Application Dated: 08/18/2006

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States

Date of Grant: 08/18/2006

Application Dated: 08/18/2006

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 1YA67bGB1KQpHL9q7pP7xQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 03/14/2007

Application Dated: 03/14/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissve change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 03/14/2007

Application Dated: 03/14/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.01064
36 CC	15E	5260.0 - 5320.0	0.088
36 CC MO	15E	5180.0 - 5240.0	0.038
36 CC MO	15E	5260.0 - 5320.0	0.107

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissve change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

5.15-5.25 GHz band is limited for indoor operation only.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

EA929058

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 03/14/2007

Application Dated: 03/14/2007

Broadcom Corporation

190 Mathilda Place

Sunnyvale, CA 94086

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissve change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States

Date of Grant: 03/14/2007

Application Dated: 03/14/2007

Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1022-H

Name of Grantee:	Broadcom Corporation

Equipment Class:	Digital Transmission System
Notes:	802.11ag/Draft 802.11n WLAN PCI-E Mini Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.4
36 CC	15C	5745.0 - 5825.0	0.265
36 CC MO	15C	2412.0 - 2462.0	0.489
36 CC MO	15C	5745.0 - 5825.0	0.406

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissve change: co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

EA524213

802.11ag/Draft 802.11n WLAN PCI-E Mini Card

by Broadcom Corporation

Grantee Code: QDS Product Code: BRCM1022H

Latest application date: 2007-07-26

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application Z/oWRhiBGZiHH+Cwmmsrcg==

EAS Grant - Application Z/oWRhiBGZiHH+Cwmmsrcg==

TCB Grant - Application VUDiINiz4LgqkTOqZeGLYA==

EAS Grant - Application VUDiINiz4LgqkTOqZeGLYA==

TCB Grant - Application TdPWkcJw72IFqQA0CN5FTw==

EAS Grant - Application TdPWkcJw72IFqQA0CN5FTw==

TCB Grant - Application P7XaQ351GPh0gcFacskCGQ==

EAS Grant - Application P7XaQ351GPh0gcFacskCGQ==

TCB Grant - Application muYOe7rVqbDs2JEFexY6+Q==

EAS Grant - Application muYOe7rVqbDs2JEFexY6+Q==

TCB Grant - Application MmCAezdD35n4rZAwd6LCuw==

EAS Grant - Application MmCAezdD35n4rZAwd6LCuw==

TCB Grant - Application M/JqI/uMAsSt6rQ4RKwv0A==

EAS Grant - Application M/JqI/uMAsSt6rQ4RKwv0A==

TCB Grant - Application Lf7SiUg+5QgylCMB1Sf3fA==

EAS Grant - Application Lf7SiUg+5QgylCMB1Sf3fA==

TCB Grant - Application khDgl7lXlhRIbQIMjb5qkQ==

EAS Grant - Application khDgl7lXlhRIbQIMjb5qkQ==

TCB Grant - Application fJIK6EW8PbjOQXccL4+LZg==

EAS Grant - Application fJIK6EW8PbjOQXccL4+LZg==

TCB Grant - Application fbkvF9ArJ2CcJEXZXPNOBA==

EAS Grant - Application fbkvF9ArJ2CcJEXZXPNOBA==

TCB Grant - Application b2Rz7irNAPkhg5KGe7LquQ==

EAS Grant - Application b2Rz7irNAPkhg5KGe7LquQ==

TCB Grant - Application 63pc+L+v5WloYyhgsiuUhA==

EAS Grant - Application 63pc+L+v5WloYyhgsiuUhA==

TCB Grant - Application 1YA67bGB1KQpHL9q7pP7xQ==

EAS Grant - Application 1YA67bGB1KQpHL9q7pP7xQ==

TCB Grant - Application /v64cZv+G/ia2euAlSmwJQ==

EAS Grant - Application /v64cZv+G/ia2euAlSmwJQ==