FCC ID QDS-BRCM1031

802.11a/g/draft 802.11n WLAN PCI-E Minicard

by Broadcom Corporation

Grantee Code: QDS   Product Code: BRCM1031
Latest application date: 2010-05-27

FCC ID Device Details

FCC IDQDS-BRCM1031
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQDS
Product CodeBRCM1031
Applicant BusinessBroadcom Corporation 🇺🇸
Related Domains broadcom.com
Equipment Class802.11a/g/draft 802.11n WLAN PCI-E Minicard
Test FirmNational Technical Systems - Silicon Valley

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2010-05-27
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-05-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2009-04-23
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-04-23
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-01-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2009-01-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-12-16
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-12-16
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-08-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-08-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-08-14
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-08-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-05-30
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-05-30
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-05-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-05-20
5180-5240 MHzOriginal Equipment2008-02-26
2412-2462 MHzOriginal Equipment2008-02-25

Exhibits

DocumentTypeAvailableFile
Bear ManualUsers Manual2009-09-19PDF 706 KB
Tiger ManualUsers Manual2009-09-19PDF 938.5 KB
User Manual Dell Regulatory Statement updatedUsers Manual2009-09-19PDF 260.5 KB
User ManualUsers Manual2009-07-16PDF 938.5 KB
User Manual StatementUsers Manual2009-07-16PDF 260.5 KB
User ManualUsers Manual2009-05-15PDF 692.8 KB
ManualUsers Manual2009-01-31PDF 660.1 KB
Manual StatementUsers Manual2009-01-31PDF 260.5 KB
ManualUsers Manual2008-10-29PDF 260.5 KB
User ManualUsers Manual2008-08-23PDF 726.7 KB
BT antenna placementInternal Photos2008-08-27PDF 116.2 KB
Int PhotosInternal Photos2008-08-23PDF 529.7 KB
Int photosInternal Photos2008-08-23PDF 529.7 KB
Internal photosInternal Photos2008-08-23PDF 529.7 KB
External Photos Laptop No Bump AntennaExternal Photos2009-05-15PDF 125.1 KB
External Photos Laptop no Bump AntennaExternal Photos2009-05-15PDF 125.1 KB
External Photos Laptop with Bump AntennaExternal Photos2009-05-15PDF 283.5 KB
Ext PhotosExternal Photos2008-08-23PDF 462.9 KB
LabelID Label/Location Info2009-04-23PDF 452.7 KB
Label InfoID Label/Location Info2008-12-16PDF 373.8 KB
LabelID Label/Location Info2008-02-26PDF 30.1 KB
LabelID Label/Location Info2008-02-26PDF 529.7 KB
Setup PhotosTest Setup Photos2010-11-12PDF 832.6 KB
Seup PhotosTest Setup Photos2010-11-12PDF 832.6 KB
SAR Photos 1Test Setup Photos2009-09-19PDF 246.7 KB
SAR Photos 2Test Setup Photos2009-09-19PDF 220.2 KB
Setup Photos 1Test Setup Photos2009-09-19PDF 246.7 KB
Setup Photos 2Test Setup Photos2009-09-19PDF 220.2 KB
SAR PhotosTest Setup Photos2009-07-16PDF 638.1 KB
SAR Report Appendix BTest Setup Photos2009-05-15PDF 160.8 KB
Test Setup PhotosTest Setup Photos2009-05-15PDF 168.8 KB
SAR PhotosTest Setup Photos2009-01-31PDF 232.5 KB
Setup PhotosTest Setup Photos2009-01-31PDF 154.9 KB
Setup PhotosTest Setup Photos2009-01-31PDF 155 KB
SAR Photos DiazTest Setup Photos2008-10-29PDF 313.8 KB
SAR Photos HepburnTest Setup Photos2008-10-29PDF 325.4 KB
SAR Photos PacinoTest Setup Photos2008-10-29PDF 327.8 KB
Setup Photos DiazTest Setup Photos2008-10-29PDF 165.1 KB
Setup Photos HepburnTest Setup Photos2008-10-29PDF 160.8 KB
Setup Photos PacinoTest Setup Photos2008-10-29PDF 171.4 KB
Test PhotosTest Setup Photos2008-08-23PDF 191.1 KB
Test Setup photosTest Setup Photos2008-08-23PDF 321.7 KB
Test setup photosTest Setup Photos2008-08-23PDF 191.1 KB
Test PhotosTest Setup Photos2008-08-14PDF 364 KB
SAR Photos HepburnyTest Setup Photos2008-07-04PDF 325.4 KB
Setup Photos DiazTest Setup Photos2008-07-04PDF 165.2 KB
Setup Photos HepburnTest Setup Photos2008-07-04PDF 160.7 KB
Setup Photos PacinoTest Setup Photos2008-07-04PDF 171.5 KB
Test ReportTest Report2010-05-27PDF 408.8 KB
Test Report_DTSTest Report2010-05-27PDF 336.5 KB
SAR Report P02T001RF Exposure Info2009-04-23PDF 822.4 KB
SAR Report PP19SRF Exposure Info2009-04-23PDF 813.3 KB
SAR Test ReportRF Exposure Info2008-12-16PDF 248.8 KB
Test Report RadiatedTest Report2008-12-16PDF 730.4 KB
Test Report RadiatedTest Report2008-12-16PDF 952.1 KB
ReportTest Report2008-08-27PDF 1.1 MB
Test ReportTest Report2008-08-27PDF 1.2 MB
Test RptTest Report2008-08-14PDF 738.7 KB
Test RptTest Report2008-08-14PDF 1.3 MB
DTS C2PC Report DiazTest Report2008-05-20PDF 719.2 KB
DTS C2PC Report HepburnTest Report2008-05-20PDF 735.1 KB
DTS C2PC Report PacinoTest Report2008-05-20PDF 809.8 KB
Diaz ReportTest Report2008-05-20PDF 616.2 KB
Hepburn ReportTest Report2008-05-20PDF 570.7 KB
Pacino ReportTest Report2008-05-20PDF 607.2 KB
DFS test reportTest Report2008-02-26PDF 1.6 MB
RF Test reportTest Report2008-02-26PDF 2.6 MB
Test reportTest Report2008-02-26PDF 237.8 KB
Test rptTest Report2008-02-25PDF 1.8 MB
Non US FrequenciesAttestation Statements2008-02-26PDF 19.7 KB
Agent AuthorizationCover Letter(s)2010-05-27PDF 29.3 KB
Confidentiality RequestCover Letter(s)2010-05-27PDF 33.6 KB
Cover letterCover Letter(s)2010-05-27PDF 18.8 KB
Authorization Letter 1Cover Letter(s)2009-04-23PDF 115.5 KB
Authorization Letter 2Cover Letter(s)2009-04-23PDF 95.9 KB
C2PC LetterCover Letter(s)2009-04-23PDF 33 KB
Request for ConfidentialityCover Letter(s)2009-04-23PDF 51 KB
C2PC LetterCover Letter(s)2009-01-23PDF 43.8 KB
Request for ConfidentialityCover Letter(s)2009-01-23PDF 20.7 KB
AuthorizationCover Letter(s)2008-12-16PDF 57.5 KB
Class 2 Permissive Change RequestCover Letter(s)2008-12-16PDF 50.3 KB
Confidentiality RequestCover Letter(s)2008-12-16PDF 77.8 KB
C2PC LetterCover Letter(s)2008-08-27PDF 20.4 KB
Request for ConfidentialityCover Letter(s)2008-08-27PDF 18.3 KB
TCB Q and ACover Letter(s)2008-08-27PDF 14.9 KB
Agent LtrCover Letter(s)2008-08-14PDF 21.3 KB
Confid LtrCover Letter(s)2008-08-14PDF 17.7 KB
Cvr LtrCover Letter(s)2008-08-14PDF 70.9 KB
Cvr LtrCover Letter(s)2008-08-14PDF 69.9 KB
Cvr Ltr 2Cover Letter(s)2008-08-14PDF 20.2 KB
Agent Authorization LetterCover Letter(s)2008-05-30PDF 95.9 KB
Agent authorization letterCover Letter(s)2008-05-30PDF 95.9 KB
Class II permissive change letterCover Letter(s)2008-05-30PDF 13.7 KB
FCC authorization letterCover Letter(s)2008-05-30PDF 115.5 KB
Request for confidentiality letterCover Letter(s)2008-05-30PDF 28.4 KB
Class II Permissive Change LetterCover Letter(s)2008-05-20PDF 81.7 KB
Request for ConfidentialityCover Letter(s)2008-05-20PDF 28.1 KB
TCB Q and ACover Letter(s)2008-05-20PDF 21.7 KB
Agent LtrCover Letter(s)2008-02-26PDF 19.8 KB
Agt LtrCover Letter(s)2008-02-26PDF 19.8 KB
Confid LtrCover Letter(s)2008-02-26PDF 18.4 KB
Confidentiality LtrCover Letter(s)2008-02-26PDF 18.4 KB
Cvr LtrCover Letter(s)2008-02-26PDF 71 KB
Modular LtrCover Letter(s)2008-02-26PDF 9.1 KB
Confid ltrCover Letter(s)2008-02-25PDF 18.4 KB
Modular ltrCover Letter(s)2008-02-25PDF 9.1 KB
MPE CalculationRF Exposure Info2010-05-27PDF 62.7 KB
MPE CalculationRF Exposure Info2010-05-27PDF 61.7 KB
Antenna 15Parts List/Tune Up Info2009-04-23PDF 709.1 KB
Antenna 16Parts List/Tune Up Info2009-04-23PDF 2.5 MB
Antenna 39 AuxParts List/Tune Up Info2009-04-23PDF 339.6 KB
Antenna 39 MainParts List/Tune Up Info2009-04-23PDF 341.7 KB
Antenna 40Parts List/Tune Up Info2009-04-23PDF 1.8 MB
Antenna 41Parts List/Tune Up Info2009-04-23PDF 1.2 MB
SAR attachment 1RF Exposure Info2009-04-23PDF 775.3 KB
SAR attachment 2RF Exposure Info2009-04-23PDF 650.5 KB
SAR attachment 3RF Exposure Info2009-04-23PDF 439.4 KB
SAR attachment 4RF Exposure Info2009-04-23PDF 1.2 MB
Antenna 18Parts List/Tune Up Info2009-01-23PDF 990.3 KB
Antenna 19Parts List/Tune Up Info2009-01-23PDF 893.5 KB
Antenna 20Parts List/Tune Up Info2009-01-23PDF 2.1 MB
Antenna 21Parts List/Tune Up Info2009-01-23PDF 2 MB
Antenna 22Parts List/Tune Up Info2009-01-23PDF 1 MB
SAR ReportRF Exposure Info2009-01-23PDF 499.7 KB
SAR attachment 1RF Exposure Info2009-01-23PDF 916.6 KB
SAR Probe Calibration DataRF Exposure Info2008-12-16PDF 658.3 KB
SAR ReportRF Exposure Info2008-12-16PDF 248.8 KB
SAR Report Appendix ARF Exposure Info2008-12-16PDF 398.9 KB
SAR Report Appendix CRF Exposure Info2008-12-16PDF 502.6 KB
SAR Report Appendix DRF Exposure Info2008-12-16PDF 43.5 KB
Antenna Specification 10Parts List/Tune Up Info2008-08-27PDF 1.4 MB
Antenna Specification 11Parts List/Tune Up Info2008-08-27PDF 1.3 MB
Antenna Specification 12Parts List/Tune Up Info2008-08-27PDF 1.6 MB
Antenna Specification 13Parts List/Tune Up Info2008-08-27PDF 3.7 MB
Antenna Specification 14Parts List/Tune Up Info2008-08-27PDF 3.7 MB
Antenna Specification 15Parts List/Tune Up Info2008-08-27PDF 3.8 MB
SAR ReportRF Exposure Info2008-08-27PDF 763.3 KB
SAR attachment 1RF Exposure Info2008-08-27PDF 708.1 KB
SAR attachment 2 1RF Exposure Info2008-08-27PDF 307 KB
SAR attachment 2 2RF Exposure Info2008-08-27PDF 1.2 MB
SAR attachment 3RF Exposure Info2008-08-27PDF 650.5 KB
SAR attachment 4RF Exposure Info2008-08-27PDF 439.4 KB
SAR attachment 5RF Exposure Info2008-08-27PDF 1.2 MB
MPERF Exposure Info2008-08-14PDF 68.9 KB
MPERF Exposure Info2008-08-14PDF 67.1 KB
Antennan 1Parts List/Tune Up Info2008-05-20PDF 2.3 MB
Antennan 2Parts List/Tune Up Info2008-05-20PDF 1,003.1 KB
Antennan 3Parts List/Tune Up Info2008-05-20PDF 1.3 MB
Antennan 4Parts List/Tune Up Info2008-05-20PDF 3.3 MB
Antennan 5Parts List/Tune Up Info2008-05-20PDF 505.2 KB
Antennan 5Parts List/Tune Up Info2008-05-20PDF 500.8 KB
Antennan 6 1Parts List/Tune Up Info2008-05-20PDF 3.3 MB
Antennan 6 2Parts List/Tune Up Info2008-05-20PDF 3.5 MB
Antennan 7Parts List/Tune Up Info2008-05-20PDF 1.3 MB
Diaz SAR ReportRF Exposure Info2008-05-20PDF 300.7 KB
Diaz SAR attachment 1RF Exposure Info2008-05-20PDF 692.4 KB
Diaz SAR attachment 2RF Exposure Info2008-05-20PDF 851.1 KB
Diaz SAR attachment 3RF Exposure Info2008-05-20PDF 650.5 KB
Diaz SAR attachment 4RF Exposure Info2008-05-20PDF 439.4 KB
Diaz SAR attachment 5RF Exposure Info2008-05-20PDF 1.2 MB
Hepburn SAR ReportRF Exposure Info2008-05-20PDF 313 KB
Hepburn SAR attachment 1RF Exposure Info2008-05-20PDF 702.6 KB
Hepburn SAR attachment 2RF Exposure Info2008-05-20PDF 1.3 MB
Hepburn SAR attachment 3RF Exposure Info2008-05-20PDF 650.5 KB
Hepburn SAR attachment 4RF Exposure Info2008-05-20PDF 439.4 KB
Hepburn SAR attachment 5RF Exposure Info2008-05-20PDF 1.2 MB
Pacino SAR ReportRF Exposure Info2008-05-20PDF 302.9 KB
Pacino SAR attachment 1RF Exposure Info2008-05-20PDF 692.4 KB
Pacino SAR attachment 2RF Exposure Info2008-05-20PDF 858.7 KB
Pacino SAR attachment 3RF Exposure Info2008-05-20PDF 650.5 KB
Pacino SAR attachment 4RF Exposure Info2008-05-20PDF 439.4 KB
Pacino SAR attachment 5RF Exposure Info2008-05-20PDF 1.2 MB
MPERF Exposure Info2008-02-26PDF 53.3 KB
MPERF Exposure Info2008-02-25PDF 26 KB

Application Information

Application IDzU53xweUitsRyVhPoZkjDA==
Final Action Date2010-05-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007091952
Model-BRCM1031
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/g/draft 802.11n WLAN PCI-E Minicard
Responsible PartyDaniel Lawless, Director of Engineering, System Operations, ComplianceEngineering-list-CA-list@broadcom.com , 408-543-3300
AgentMark Mark Mark, Elliott Laboratories, tcb@elliottlabs.com , 408-245-7800
Technical ContactMark Hill, Elliott Laboratories, mark.hill@ntscorp.com , 408-245-7800
Test FirmDavid Bare, National Technical Systems - Silicon Valley, david.bare@nts.com , 510-578-3500
TCB Emailtcb@elliottlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/12/2010
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. Permissive Change to add higher gain antennas as described in the filing.

Applications

Application IDDatePurpose
zU53xweUitsRyVhPoZkjDA==2010-05-27Class II permissive change or modification of presently authorized equipment
lG2rWHKLtrIqxDwM7pLkIg==2010-05-27Class II permissive change or modification of presently authorized equipment
wsWQgnps7dfEe43OzETRaQ==2009-04-23Class II permissive change or modification of presently authorized equipment
eJBRfoOUMFM5cO29KgCuvg==2009-04-23Class II permissive change or modification of presently authorized equipment
vrXGd6XojeRLH6mruYB+fA==2009-01-23Class II permissive change or modification of presently authorized equipment
XH6oX1EQ0dDtkCOhMj0rwQ==2009-01-23Class II permissive change or modification of presently authorized equipment
uwhFlu144iEDj63m0DXz1Q==2008-12-16Class II permissive change or modification of presently authorized equipment
02xANxWl0o/swkfHv6hneQ==2008-12-16Class II permissive change or modification of presently authorized equipment
dVIWh9Y3Gz+i2GitNZS+EQ==2008-08-27Class II permissive change or modification of presently authorized equipment
9ur9iWQzKRUre+C6Tly84Q==2008-08-27Class II permissive change or modification of presently authorized equipment
qFKw+sJ1/8mKsoO6+tAhHg==2008-08-14Class II permissive change or modification of presently authorized equipment
0ZEcxUH5tSMXLtB/rhgGjg==2008-08-14Class II permissive change or modification of presently authorized equipment
y1ctWEU77M3gNqZof8haPw==2008-05-30Class II permissive change or modification of presently authorized equipment
PUnp9wMpvI8PKwVySR6JWg==2008-05-30Class II permissive change or modification of presently authorized equipment
qEXR9BYQuEnM17v8indWQw==2008-05-20Class II permissive change or modification of presently authorized equipment
HnCV0WoGSateh2zAmHwhSA==2008-05-20Class II permissive change or modification of presently authorized equipment
daZNFP0ZTeHv9EBPjS4tmA==2008-02-26Original Equipment
RJDo2tY+ouqTs7Wb8mU/7A==2008-02-26Original Equipment
kuTA82pyNtTmv5PF2rfbng==2008-02-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2412-2462 MHz0.15915CCC
2412-2462 MHz0.15115CCC, MO
2422-2452 MHz0.04815CCC, MO
5180-5240 MHz0.0315ECC
5180-5240 MHz0.0215ECC, MO
5190-5230 MHz0.03415ECC, MO
5260-5320 MHz0.07415ECC, MO
5260-5320 MHz0.07415ECC, MO, ND
5260-5320 MHz0.06315ECC
5260-5320 MHz0.06315ECC, ND
5270-5310 MHz0.07415ECC, MO
5270-5310 MHz0.07415ECC, MO, ND
5500-5700 MHz0.06615ECC
5500-5700 MHz0.06615ECC, ND
5500-5700 MHz0.09115ECC, MO
5500-5700 MHz0.09115ECC, MO, ND

Grants

TCB Grant - Application zU53xweUitsRyVhPoZkjDA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 05/27/2010

Application Dated: 05/27/2010
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO ND 15E 5260.0  -  5320.0 0.074  
CC ND 15E 5260.0  -  5320.0 0.063  
CC MO ND 15E 5270.0  -  5310.0 0.074  
CC ND 15E 5500.0  -  5700.0 0.066  
CC MO ND 15E 5500.0  -  5700.0 0.091  
CC MO ND 15E 5510.0  -  5670.0 0.107  

Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. Permissive Change to add higher gain antennas as described in the filing.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application zU53xweUitsRyVhPoZkjDA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 05/27/2010

Application Dated: 05/27/2010
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO ND 15E 5260.0  -  5320.0 0.074  
CC ND 15E 5260.0  -  5320.0 0.063  
CC MO ND 15E 5270.0  -  5310.0 0.074  
CC ND 15E 5500.0  -  5700.0 0.066  
CC MO ND 15E 5500.0  -  5700.0 0.091  
CC MO ND 15E 5510.0  -  5670.0 0.107  

Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. Permissive Change to add higher gain antennas as described in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application y1ctWEU77M3gNqZof8haPw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/30/2008

Application Dated: 05/30/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO 15E 5260.0  -  5320.0 0.074  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change by implementing Bios-Lock features in specific notebook computer platform as documented in the filing to allow end user installation. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg.
Limited Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application y1ctWEU77M3gNqZof8haPw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 05/30/2008

Application Dated: 05/30/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO 15E 5260.0  -  5320.0 0.074  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change by implementing Bios-Lock features in specific notebook computer platform as documented in the filing to allow end user installation. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg.

Limited Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application XH6oX1EQ0dDtkCOhMj0rwQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/23/2009

Application Dated: 01/23/2009
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO 15E 5260.0  -  5320.0 0.074  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg. The highest SAR values in this filing are: 2.4 GHz: 0.009 W/kg, 5.15 – 5.85 GHz: 0.054 W/kg,

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application XH6oX1EQ0dDtkCOhMj0rwQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/23/2009

Application Dated: 01/23/2009
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO 15E 5260.0  -  5320.0 0.074  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg. The highest SAR values in this filing are: 2.4 GHz: 0.009 W/kg, 5.15 – 5.85 GHz: 0.054 W/kg,


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application wsWQgnps7dfEe43OzETRaQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/23/2009

Application Dated: 04/07/2009
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO 15E 5260.0  -  5320.0 0.074  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg. The highest SAR values in this filing are: 2.4 GHz: 0.03 W/kg, 5.15 – 5.85 GHz: 0.058 W/kg,

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application wsWQgnps7dfEe43OzETRaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 04/23/2009

Application Dated: 04/07/2009
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO 15E 5260.0  -  5320.0 0.074  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg. The highest SAR values in this filing are: 2.4 GHz: 0.03 W/kg, 5.15 – 5.85 GHz: 0.058 W/kg,


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application vrXGd6XojeRLH6mruYB+fA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/23/2009

Application Dated: 01/23/2009
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg. The highest SAR values in this filing are: 2.4 GHz: 0.009 W/kg, 5.15 – 5.85 GHz: 0.054 W/kg,

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application vrXGd6XojeRLH6mruYB+fA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/23/2009

Application Dated: 01/23/2009
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg. The highest SAR values in this filing are: 2.4 GHz: 0.009 W/kg, 5.15 – 5.85 GHz: 0.054 W/kg,


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application uwhFlu144iEDj63m0DXz1Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 12/16/2008

Application Dated: 12/16/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5260.0  -  5320.0 0.074  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change to add portable configuration in specific host as described in this filling. Limited Single Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.199 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application uwhFlu144iEDj63m0DXz1Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 12/16/2008

Application Dated: 12/16/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5260.0  -  5320.0 0.074  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change to add portable configuration in specific host as described in this filling. Limited Single Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.199 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application RJDo2tY+ouqTs7Wb8mU/7A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 02/26/2008

Application Dated: 02/25/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO ND 15E 5260.0  -  5320.0 0.074  
CC ND 15E 5260.0  -  5320.0 0.063  
CC MO ND 15E 5270.0  -  5310.0 0.074  
CC ND 15E 5500.0  -  5700.0 0.066  
CC MO ND 15E 5500.0  -  5700.0 0.091  
CC MO ND 15E 5510.0  -  5670.0 0.107  

Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application RJDo2tY+ouqTs7Wb8mU/7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 02/26/2008

Application Dated: 02/25/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO ND 15E 5260.0  -  5320.0 0.074  
CC ND 15E 5260.0  -  5320.0 0.063  
CC MO ND 15E 5270.0  -  5310.0 0.074  
CC ND 15E 5500.0  -  5700.0 0.066  
CC MO ND 15E 5500.0  -  5700.0 0.091  
CC MO ND 15E 5510.0  -  5670.0 0.107  

Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application qFKw+sJ1/8mKsoO6+tAhHg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 08/14/2008

Application Dated: 08/14/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5260.0  -  5320.0 0.074  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Limited Single Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg. Permissive change to add antenna type.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application qFKw+sJ1/8mKsoO6+tAhHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 08/14/2008

Application Dated: 08/14/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5260.0  -  5320.0 0.074  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Limited Single Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg. Permissive change to add antenna type.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application qEXR9BYQuEnM17v8indWQw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/20/2008

Application Dated: 05/20/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive change to add specific portable hosts Dell PP33L, PP31L, PP24L and co-location with UWB/BT module FCCID: QDS-BRCM1035 as described in the filing. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application qEXR9BYQuEnM17v8indWQw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 05/20/2008

Application Dated: 05/20/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive change to add specific portable hosts Dell PP33L, PP31L, PP24L and co-location with UWB/BT module FCCID: QDS-BRCM1035 as described in the filing. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application PUnp9wMpvI8PKwVySR6JWg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/30/2008

Application Dated: 05/30/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change by implementing Bios-Lock features in specific notebook computer platform as documented in the filing to allow end user installation. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg.
Limited Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application PUnp9wMpvI8PKwVySR6JWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 05/30/2008

Application Dated: 05/30/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change by implementing Bios-Lock features in specific notebook computer platform as documented in the filing to allow end user installation. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg.

Limited Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lG2rWHKLtrIqxDwM7pLkIg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 05/27/2010

Application Dated: 05/27/2010
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Permissive Change to add higher gain antennas as described in the filing.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application lG2rWHKLtrIqxDwM7pLkIg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 05/27/2010

Application Dated: 05/27/2010
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Permissive Change to add higher gain antennas as described in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application kuTA82pyNtTmv5PF2rfbng==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 02/25/2008

Application Dated: 02/25/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application kuTA82pyNtTmv5PF2rfbng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 02/25/2008

Application Dated: 02/25/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application HnCV0WoGSateh2zAmHwhSA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/20/2008

Application Dated: 05/20/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO ND 15E 5260.0  -  5320.0 0.074  
CC ND 15E 5260.0  -  5320.0 0.063  
CC MO ND 15E 5270.0  -  5310.0 0.074  
CC ND 15E 5500.0  -  5700.0 0.066  
CC MO ND 15E 5500.0  -  5700.0 0.091  
CC MO ND 15E 5510.0  -  5670.0 0.107  

Class II Permissive change to add specific portable hosts Dell PP33L, PP31L, PP24L and co-location with UWB/BT module FCCID: QDS-BRCM1035 as described in the filing. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application HnCV0WoGSateh2zAmHwhSA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 05/20/2008

Application Dated: 05/20/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO ND 15E 5260.0  -  5320.0 0.074  
CC ND 15E 5260.0  -  5320.0 0.063  
CC MO ND 15E 5270.0  -  5310.0 0.074  
CC ND 15E 5500.0  -  5700.0 0.066  
CC MO ND 15E 5500.0  -  5700.0 0.091  
CC MO ND 15E 5510.0  -  5670.0 0.107  

Class II Permissive change to add specific portable hosts Dell PP33L, PP31L, PP24L and co-location with UWB/BT module FCCID: QDS-BRCM1035 as described in the filing. Limited Modular Approval (LMA). Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user is not provided with instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application eJBRfoOUMFM5cO29KgCuvg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/23/2009

Application Dated: 04/07/2009
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CO 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filing. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg. The highest SAR values in this filing are: 2.4 GHz: 0.03 W/kg, 5.15 – 5.85 GHz: 0.058 W/kg,

CC: This device is certified pursuant to two different Part 15 rules sections.
CO: Transmitter meets technical requirements only for use at coast stations.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application eJBRfoOUMFM5cO29KgCuvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 04/23/2009

Application Dated: 04/07/2009
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CO 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filing. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg. The highest SAR values in this filing are: 2.4 GHz: 0.03 W/kg, 5.15 – 5.85 GHz: 0.058 W/kg,


CC: This device is certified pursuant to two different Part 15 rules sections.
CO: Transmitter meets technical requirements only for use at coast stations.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application dVIWh9Y3Gz+i2GitNZS+EQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/27/2008

Application Dated: 08/27/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application dVIWh9Y3Gz+i2GitNZS+EQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 08/27/2008

Application Dated: 08/27/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application daZNFP0ZTeHv9EBPjS4tmA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 02/26/2008

Application Dated: 02/25/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application daZNFP0ZTeHv9EBPjS4tmA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 02/26/2008

Application Dated: 02/25/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11abg/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9ur9iWQzKRUre+C6Tly84Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/27/2008

Application Dated: 08/27/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO 15E 5260.0  -  5320.0 0.074  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 9ur9iWQzKRUre+C6Tly84Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 08/27/2008

Application Dated: 08/27/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO 15E 5190.0  -  5230.0 0.034  
CC MO 15E 5260.0  -  5320.0 0.074  
CC 15E 5260.0  -  5320.0 0.063  
CC MO 15E 5270.0  -  5310.0 0.074  
CC 15E 5500.0  -  5700.0 0.066  
CC MO 15E 5500.0  -  5700.0 0.091  
CC MO 15E 5510.0  -  5670.0 0.107  

Class II Permissive Change to allow portable configurations in specific hosts and co-location in mobile configurations as described in this filling. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. In Mobile exposure conditions the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Device complies with DFS requirements as client only without radar detection. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 0ZEcxUH5tSMXLtB/rhgGjg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 08/14/2008

Application Dated: 08/14/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Limited Single Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg. Permissive change to add new antenna type.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 0ZEcxUH5tSMXLtB/rhgGjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 08/14/2008

Application Dated: 08/14/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Limited Single Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.158 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 Ghz: 0.681 W/kg, 5.8 Ghz: 0.722 W/kg. Permissive change to add new antenna type.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 02xANxWl0o/swkfHv6hneQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 12/16/2008

Application Dated: 12/16/2008
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change to add portable configuration in specific host as described in this filling. Limited Single Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.199 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 02xANxWl0o/swkfHv6hneQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 12/16/2008

Application Dated: 12/16/2008
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1031
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ag/Draft 802.11n WLAN PCI-E Minicard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.159  
CC MO 15C 2412.0  -  2462.0 0.151  
CC MO 15C 2422.0  -  2452.0 0.048  
CC 15C 5745.0  -  5825.0 0.047  
CC MO 15C 5745.0  -  5825.0 0.096  
CC MO 15C 5755.0  -  5795.0 0.098  

Class II Permissive Change to add portable configuration in specific host as described in this filling. Limited Single Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described under this FCC ID number. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported body SAR values for this FCC ID are: 2.4 GHz: 0.199 W/kg, 5.2 GHz: 0.603 W/kg, 5.5 GHz: 0.681 W/kg, 5.8 GHz: 0.722 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: