FCC ID QDS-BRCM1047
802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard
by Broadcom Corporation
Grantee Code: QDS Product Code: BRCM1047
Latest application date: 2010-04-13
FCC ID Device Details
| FCC ID | QDS-BRCM1047 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QDS |
| Product Code | BRCM1047 |
| Applicant Business | Broadcom Corporation 🇺🇸 |
| Related Domains |  broadcom.com  ccsemc.com |
| Equipment Class | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-04-13 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2010-04-13 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-03-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2010-01-08 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-01-08 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2009-10-20 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-10-20 |
| 2412-2462 MHz | Original Equipment | 2009-08-26 |
| 2402-2480 MHz | Original Equipment | 2009-08-26 |
| 5180-5240 MHz | Original Equipment | 2009-08-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual 1 | Test Setup Photos | 2010-10-10 | PDF 2.7 MB |
| manual 1 | Users Manual | 2010-10-10 | PDF 2.7 MB |
| manual 2 | Users Manual | 2010-10-10 | PDF 3.5 MB |
| User manual | Users Manual | 2010-04-18 | PDF 4.2 MB |
| Users Manual | Users Manual | 2010-02-20 | PDF 772 KB |
| SAR Test Report_Photos | Internal Photos | 2010-10-10 | PDF 259.8 KB |
| Internal photos | Internal Photos | 2010-04-18 | PDF 17.1 KB |
| Internal Photos | Internal Photos | 2010-02-20 | PDF 373.2 KB |
| External Photos | External Photos | 2010-02-20 | PDF 295 KB |
| Label format and location | ID Label/Location Info | 2009-10-20 | PDF 23.7 KB |
| ID Label | ID Label/Location Info | 2009-08-26 | PDF 94.7 KB |
| SAR Test Report_Photos | Test Setup Photos | 2010-10-10 | PDF 259.8 KB |
| Test setup photos | Test Setup Photos | 2010-09-25 | PDF 220.6 KB |
| Setup Photos | Test Setup Photos | 2010-07-07 | PDF 185.6 KB |
| Setup Photos | Test Setup Photos | 2010-06-20 | PDF 137.7 KB |
| SAR test setup photos | Test Setup Photos | 2010-04-18 | PDF 134.8 KB |
| Test Setup Photos | Test Setup Photos | 2010-02-20 | PDF 250.1 KB |
| Test Setup Photos | Test Setup Photos | 2010-02-20 | PDF 299.5 KB |
| Test Setup Photos | Test Setup Photos | 2010-02-20 | PDF 242.9 KB |
| Test Setup Photos | Test Setup Photos | 2010-02-20 | PDF 248.4 KB |
| SAR Test Report | RF Exposure Info | 2010-04-13 | PDF 696 KB |
| Test report | Test Report | 2010-03-28 | PDF 4 MB |
| Report | Test Report | 2010-01-08 | PDF 231.4 KB |
| Report | Test Report | 2010-01-08 | PDF 1.3 MB |
| Report | Test Report | 2009-08-26 | PDF 4.2 MB |
| Report | Test Report | 2009-08-26 | PDF 4.7 MB |
| Test Report | Test Report | 2009-08-26 | PDF 1.6 MB |
| Test Report | Test Report | 2009-08-26 | PDF 429.4 KB |
| No Ad hoc attestation | Cover Letter(s) | 2009-08-26 | PDF 22.7 KB |
| Auth Letter | Cover Letter(s) | 2010-04-13 | PDF 115.5 KB |
| C2PC Letter | Cover Letter(s) | 2010-04-13 | PDF 22.3 KB |
| CCS Certification Auth Letter | Cover Letter(s) | 2010-04-13 | PDF 115.5 KB |
| Confi. Letter | Cover Letter(s) | 2010-04-13 | PDF 35.3 KB |
| Confidential Letter | Cover Letter(s) | 2010-04-13 | PDF 35.3 KB |
| agent authorization | Cover Letter(s) | 2010-04-13 | PDF 95.9 KB |
| Agent authorization | Cover Letter(s) | 2010-03-28 | PDF 115.5 KB |
| Request for C2PC | Cover Letter(s) | 2010-03-28 | PDF 21.2 KB |
| Request for confidentiality | Cover Letter(s) | 2010-03-28 | PDF 668.1 KB |
| Authorization Letter 1 | Cover Letter(s) | 2010-01-08 | PDF 115.5 KB |
| Authorization Letter 2 | Cover Letter(s) | 2010-01-08 | PDF 95.9 KB |
| C2PC Letter | Cover Letter(s) | 2010-01-08 | PDF 19.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2010-01-08 | PDF 668.1 KB |
| TCB Q and A | Cover Letter(s) | 2010-01-08 | PDF 82 KB |
| Authorization | Cover Letter(s) | 2009-10-20 | PDF 95.9 KB |
| C2PC letter | Cover Letter(s) | 2009-10-20 | PDF 24.7 KB |
| Request for confidentiality | Cover Letter(s) | 2009-10-20 | PDF 29.4 KB |
| Superseding request letter | Cover Letter(s) | 2009-10-20 | PDF 108.6 KB |
| Authorization Letter 1 | Cover Letter(s) | 2009-08-26 | PDF 115.5 KB |
| Authorization Letter 2 | Cover Letter(s) | 2009-08-26 | PDF 95.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-08-26 | PDF 62 KB |
| Modular Approval Letter | Cover Letter(s) | 2009-08-26 | PDF 21.1 KB |
| 2-1 17 inch_PT480109_2.4GH | RF Exposure Info | 2010-04-13 | PDF 193.2 KB |
| 2-1 17 inch_PT480109_2.4GHz | RF Exposure Info | 2010-04-13 | PDF 193.2 KB |
| 2-2 17 inch_PT480173_2.4GHz | RF Exposure Info | 2010-04-13 | PDF 173.2 KB |
| 2-3 15 inch_PT462541_2.4GHz | RF Exposure Info | 2010-04-13 | PDF 129.3 KB |
| 2-4 15 inch_PT482643_2.4GHz | RF Exposure Info | 2010-04-13 | PDF 128.3 KB |
| 3-1 17 inch_PT480109_5GHz | RF Exposure Info | 2010-04-13 | PDF 683.9 KB |
| 3-2 17 inch_PT480173_5GHz | RF Exposure Info | 2010-04-13 | PDF 2.9 MB |
| 3-3 15 inch_PT462541_5GHz | RF Exposure Info | 2010-04-13 | PDF 3.2 MB |
| 3-4 15 inch_PT482643_5GHz | RF Exposure Info | 2010-04-13 | PDF 3.6 MB |
| 5_Certificate of System Validation Dipole | RF Exposure Info | 2010-04-13 | PDF 439.4 KB |
| 6_Certificate of System Validation Dipole | RF Exposure Info | 2010-04-13 | PDF 693.6 KB |
| Certificate of E-Field Probe | RF Exposure Info | 2010-04-13 | PDF 677.3 KB |
| Certificate of System Validation Dipole 1 | RF Exposure Info | 2010-04-13 | PDF 439.4 KB |
| Certificate of System Validation Dipole 2 | RF Exposure Info | 2010-04-13 | PDF 693.6 KB |
| System Performance Check | RF Exposure Info | 2010-04-13 | PDF 594.4 KB |
| RF exposure 1 of 5 | RF Exposure Info | 2009-10-20 | PDF 1.4 MB |
| RF exposure 2 of 5 | RF Exposure Info | 2009-10-20 | PDF 677.3 KB |
| RF exposure 3 of 5 | RF Exposure Info | 2009-10-20 | PDF 439.4 KB |
| RF exposure 4 of 5 | RF Exposure Info | 2009-10-20 | PDF 1.2 MB |
| RF exposure 5 of 5 | RF Exposure Info | 2009-10-20 | PDF 1 MB |
| MPE | RF Exposure Info | 2009-08-26 | PDF 122 KB |
Application Information
| Application ID | a1pQefwTrDC789ZEJB2tTg== |
|---|---|
| Final Action Date | 2010-04-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007091952 |
| Model | -BRCM1047 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Responsible Party | Daniel Lawless, Director of Engineering, System Operations, ComplianceEngineering-list-CA-list@broadcom.com , 408-543-3300 |
| Technical Contact | Thu Chan, COMPLIANCE CERTIFICATION SERVICES, Thu.Chan@CCSEMC.COM , (510) 771-1000 |
| Non-Technical Contact | Thu Chan, COMPLIANCE CERTIFICATION SERVICES, Thu.Chan@CCSEMC.COM , (510) 771-1000 |
| Test Firm | Barbara Judge, Compliance Certification Services, barbara.judge@ccsemc.com , 510-771-1104 |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/10/2010 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to allow portable configurations in specific hosts as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing are 2.4 GHz: 1.06 W/kg; 5.8 GHz: 0.991 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| a1pQefwTrDC789ZEJB2tTg== | 2010-04-13 | Class II permissive change or modification of presently authorized equipment |
| 08GK2bcqPP2pNTMlBwBSaw== | 2010-04-13 | Class II permissive change or modification of presently authorized equipment |
| G1Igh5HxQuhRada1kGQkTg== | 2010-03-28 | Class II permissive change or modification of presently authorized equipment |
| DjYVPYZbnDIq2epBoARBEg== | 2010-01-08 | Class II permissive change or modification of presently authorized equipment |
| 6movO/3xCmrzhi2myWC3Zw== | 2010-01-08 | Class II permissive change or modification of presently authorized equipment |
| MtM09NLhrXxP8Ufo0a+qwg== | 2009-10-20 | Class II permissive change or modification of presently authorized equipment |
| MBDlRmVekIn7qgy8ZaW6Ew== | 2009-10-20 | Class II permissive change or modification of presently authorized equipment |
| zgshrJRW6nB/JIU3fTXf0w== | 2009-08-26 | Original Equipment |
| SpVgoH4Xp3auiqu7zR5S7g== | 2009-08-26 | Original Equipment |
| N5GvbkbbiDF5nZ7A2w35Mw== | 2009-08-26 | Original Equipment |
| 2us/q61YJxa3cO+mL/bC3w== | 2009-08-26 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0040900 | 15C | CC |
| 2412-2462 MHz | 0.36141 | 15C | CC, MO |
| 2412-2462 MHz | 0.36141 | 15C | CC |
| 2412-2462 MHz | 0.65695 | 15C | CC, MO |
| 2422-2452 MHz | 0.44624 | 15C | 12, CC, MO |
| 2422-2452 MHz | 0.44624 | 15C | CC, MO |
| 5180-5240 MHz | 0.0271 | 15E | 36, CC |
| 5180-5240 MHz | 0.0271 | 15E | 36, CC, MO |
| 5180-5240 MHz | 0.0271 | 15E | CC |
| 5180-5240 MHz | 0.02114 | 15E | 36, CC, MO |
| 5180-5240 MHz | 0.02114 | 15E | CC, MO |
| 5190-5230 MHz | 0.04539 | 15E | 36, CC, MO |
| 5190-5230 MHz | 0.04539 | 15E | CC, MO |
| 5260-5320 MHz | 0.05875 | 15E | 36, CC |
| 5260-5320 MHz | 0.05875 | 15E | 36, CC, MO |
| 5260-5320 MHz | 0.05875 | 15E | CC, ND |
| 5260-5320 MHz | 0.08083 | 15E | 36, CC, MO |
| 5260-5320 MHz | 0.08083 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.07173 | 15E | 36, CC, MO |
| 5270-5310 MHz | 0.07173 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.04571 | 15E | 36, CC |
| 5500-5700 MHz | 0.04571 | 15E | 36, CC, MO |
| 5500-5700 MHz | 0.04571 | 15E | CC, ND |
| 5500-5700 MHz | 0.08186 | 15E | 36, CC, MO |
| 5500-5700 MHz | 0.08186 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.1024 | 15E | 36, CC, MO |
| 5510-5670 MHz | 0.1024 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.1256 | 15C | 16, CC, MO |
| 5745-5825 MHz | 0.1256 | 15C | CC |
| 5745-5825 MHz | 0.21323 | 15C | 18, CC, MO |
| 5745-5825 MHz | 0.21323 | 15C | CC, MO |
| 5755-5795 MHz | 0.39631 | 15C | 17, CC, MO |
| 5755-5795 MHz | 0.39631 | 15C | CC, MO |
Grants
TCB Grant - Application zgshrJRW6nB/JIU3fTXf0w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/26/2009 Application Dated: 08/26/2009 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application zgshrJRW6nB/JIU3fTXf0w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 08/26/2009 Application Dated: 08/26/2009 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/26/2009 Application Dated: 08/26/2009 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00409 |
| Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Mobile RF Exposure category installations require the antennas used for this transmitter to be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SpVgoH4Xp3auiqu7zR5S7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 08/26/2009 Application Dated: 08/26/2009 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00409 |
| Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Mobile RF Exposure category installations require the antennas used for this transmitter to be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/26/2009 Application Dated: 08/26/2009 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0271 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.02114 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04539 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.05875 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.08083 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.07173 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.04571 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.08186 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.1024 |
| Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application N5GvbkbbiDF5nZ7A2w35Mw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 08/26/2009 Application Dated: 08/26/2009 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0271 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.02114 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04539 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.05875 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.08083 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.07173 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.04571 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.08186 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.1024 |
| Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/20/2009 Application Dated: 10/20/2009 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0271 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.02114 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04539 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.05875 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.08083 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.07173 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.04571 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.08186 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.1024 |
| Class II Permissive Change to allow portable configurations in specific host as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing is 0.056 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application MtM09NLhrXxP8Ufo0a+qwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 10/20/2009 Application Dated: 10/20/2009 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0271 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.02114 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04539 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.05875 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.08083 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.07173 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.04571 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.08186 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.1024 |
| Class II Permissive Change to allow portable configurations in specific host as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing is 0.056 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/20/2009 Application Dated: 10/20/2009 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Class II Permissive Change to allow portable configurations in specific host as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing is 0.056 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application MBDlRmVekIn7qgy8ZaW6Ew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 10/20/2009 Application Dated: 10/20/2009 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Class II Permissive Change to allow portable configurations in specific host as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing is 0.056 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/28/2010 Application Dated: 03/28/2010 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Class II permissive change to alternate antenna for 2.4GHz WLAN used. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application G1Igh5HxQuhRada1kGQkTg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 03/28/2010 Application Dated: 03/28/2010 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Class II permissive change to alternate antenna for 2.4GHz WLAN used. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/08/2010 Application Dated: 01/08/2010 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.0271 | ||
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.02114 | ||
| 36 CC MO | 15E | 5190.0 - 5230.0 | 0.04539 | ||
| 36 CC MO | 15E | 5260.0 - 5320.0 | 0.05875 | ||
| 36 CC MO | 15E | 5260.0 - 5320.0 | 0.08083 | ||
| 36 CC MO | 15E | 5270.0 - 5310.0 | 0.07173 | ||
| 36 CC MO | 15E | 5500.0 - 5700.0 | 0.04571 | ||
| 36 CC MO | 15E | 5500.0 - 5700.0 | 0.08186 | ||
| 36 CC MO | 15E | 5510.0 - 5670.0 | 0.1024 |
| Class II Permissive Change. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application DjYVPYZbnDIq2epBoARBEg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 01/08/2010 Application Dated: 01/08/2010 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.0271 | ||
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.02114 | ||
| 36 CC MO | 15E | 5190.0 - 5230.0 | 0.04539 | ||
| 36 CC MO | 15E | 5260.0 - 5320.0 | 0.05875 | ||
| 36 CC MO | 15E | 5260.0 - 5320.0 | 0.08083 | ||
| 36 CC MO | 15E | 5270.0 - 5310.0 | 0.07173 | ||
| 36 CC MO | 15E | 5500.0 - 5700.0 | 0.04571 | ||
| 36 CC MO | 15E | 5500.0 - 5700.0 | 0.08186 | ||
| 36 CC MO | 15E | 5510.0 - 5670.0 | 0.1024 |
| Class II Permissive Change. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/13/2010 Application Dated: 04/13/2010 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Class II Permissive Change to allow portable configurations in specific hosts as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing are 2.4 GHz: 1.06 W/kg; 5.8 GHz: 0.991 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application a1pQefwTrDC789ZEJB2tTg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 04/13/2010 Application Dated: 04/13/2010 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Class II Permissive Change to allow portable configurations in specific hosts as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing are 2.4 GHz: 1.06 W/kg; 5.8 GHz: 0.991 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/08/2010 Application Dated: 01/08/2010 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| 12 CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| 16 CC MO | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| 18 CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| 17 CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Class II Permissive Change. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 12: | This is a grant of Certification because receiver will tune frequencies allocated to Citizens Band Service. Section 2.904(d) of the Commission's rules applies to this grant. |
| 16: | If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| 17: | Computing devices into which this device is installed must employ shielded interconnect cables. |
| 18: | This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 6movO/3xCmrzhi2myWC3Zw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 01/08/2010 Application Dated: 01/08/2010 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.36141 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.65695 | ||
| 12 CC MO | 15C | 2422.0 - 2452.0 | 0.44624 | ||
| 16 CC MO | 15C | 5745.0 - 5825.0 | 0.1256 | ||
| 18 CC MO | 15C | 5745.0 - 5825.0 | 0.21323 | ||
| 17 CC MO | 15C | 5755.0 - 5795.0 | 0.39631 |
| Class II Permissive Change. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 12: | This is a grant of Certification because receiver will tune frequencies allocated to Citizens Band Service. Section 2.904(d) of the Commission's rules applies to this grant. |
| 16: | If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| 17: | Computing devices into which this device is installed must employ shielded interconnect cables. |
| 18: | This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/26/2009 Application Dated: 08/26/2009 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2us/q61YJxa3cO+mL/bC3w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 08/26/2009 Application Dated: 08/26/2009 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/13/2010 Application Dated: 04/13/2010 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5180.0 - 5240.0 | 0.0271 | ||
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.02114 | ||
| 36 CC MO | 15E | 5190.0 - 5230.0 | 0.04539 | ||
| 36 CC | 15E | 5260.0 - 5320.0 | 0.05875 | ||
| 36 CC MO | 15E | 5260.0 - 5320.0 | 0.08083 | ||
| 36 CC MO | 15E | 5270.0 - 5310.0 | 0.07173 | ||
| 36 CC | 15E | 5500.0 - 5700.0 | 0.04571 | ||
| 36 CC MO | 15E | 5500.0 - 5700.0 | 0.08186 | ||
| 36 CC MO | 15E | 5510.0 - 5670.0 | 0.1024 |
| Class II Permissive Change to allow portable configurations in specific host as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing is 5.2 GHz:1.16 W/kg; 5.6 GHz: 1.10 W/kg |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 08GK2bcqPP2pNTMlBwBSaw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 04/13/2010 Application Dated: 04/13/2010 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1047 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ag/Draft 802.11n WLAN + BT PCI-E Minicard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5180.0 - 5240.0 | 0.0271 | ||
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.02114 | ||
| 36 CC MO | 15E | 5190.0 - 5230.0 | 0.04539 | ||
| 36 CC | 15E | 5260.0 - 5320.0 | 0.05875 | ||
| 36 CC MO | 15E | 5260.0 - 5320.0 | 0.08083 | ||
| 36 CC MO | 15E | 5270.0 - 5310.0 | 0.07173 | ||
| 36 CC | 15E | 5500.0 - 5700.0 | 0.04571 | ||
| 36 CC MO | 15E | 5500.0 - 5700.0 | 0.08186 | ||
| 36 CC MO | 15E | 5510.0 - 5670.0 | 0.1024 |
| Class II Permissive Change to allow portable configurations in specific host as described in this filing. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO PCI-E Minicard Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing is 5.2 GHz:1.16 W/kg; 5.6 GHz: 1.10 W/kg |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |