FCC ID QDS-BRCM1056
802.11b/g/n WLAN + Bluetooth Module Combo
by Broadcom Corporation
Grantee Code: QDS Product Code: BRCM1056
Latest application date: 2011-06-16
FCC ID Device Details
| FCC ID | QDS-BRCM1056 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QDS |
| Product Code | BRCM1056 |
| Applicant Business | Broadcom Corporation 🇺🇸 |
| Related Domains |  broadcom.com |
| Equipment Class | 802.11b/g/n WLAN + Bluetooth Module Combo |
| Test Firm | Compliance Certification Services Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-16 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-16 |
| 2412-2462 MHz | Original Equipment | 2011-03-16 |
| 2402-2480 MHz | Original Equipment | 2011-03-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation Guide | Users Manual | 2011-08-28 | PDF 250.5 KB |
| Regulatory Users Guide | Users Manual | 2011-08-28 | PDF 786 KB |
| Regulatory Users Manual | Users Manual | 2011-08-28 | PDF 786 KB |
| Host user manual | Users Manual | 2011-08-01 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2011-08-28 | PDF 163.1 KB |
| Host internal photos 1 of 3 | Internal Photos | 2011-08-01 | PDF 2.9 MB |
| Host internal photos 2 of 3 | Internal Photos | 2011-08-01 | PDF 1.9 MB |
| Host internal photos 3 of 3 | Internal Photos | 2011-08-01 | PDF 1.4 MB |
| External Photos | External Photos | 2011-08-28 | PDF 836.7 KB |
| Host external photos | External Photos | 2011-08-01 | PDF 1.1 MB |
| Host label format | ID Label/Location Info | 2011-06-16 | PDF 1.1 MB |
| Label | ID Label/Location Info | 2011-03-16 | PDF 27.6 KB |
| BT Test Setup Photos | Test Setup Photos | 2011-08-28 | PDF 325.9 KB |
| DTS Test Setup Photos | Test Setup Photos | 2011-08-28 | PDF 246.9 KB |
| Test Setup Photos | Test Setup Photos | 2011-08-28 | PDF 187.6 KB |
| SAR Test setup photos | Test Setup Photos | 2011-08-01 | PDF 270.3 KB |
| Test setu photos | Test Setup Photos | 2011-08-01 | PDF 276.1 KB |
| Test setup photos | Test Setup Photos | 2011-08-01 | PDF 275.2 KB |
| Test report | Test Report | 2011-06-16 | PDF 429.5 KB |
| Test report | Test Report | 2011-06-16 | PDF 374.6 KB |
| BT Test Report | Test Report | 2011-03-16 | PDF 1.5 MB |
| DTS Test Report | Test Report | 2011-03-16 | PDF 1.9 MB |
| JBP Test Report | Test Report | 2011-03-16 | PDF 212.9 KB |
| AUthorization Letter 1 | Attestation Statements | 2011-03-16 | PDF 115.5 KB |
| Authorization Letter 1 | Attestation Statements | 2011-03-16 | PDF 115.5 KB |
| Authorization Letter 2 | Attestation Statements | 2011-03-16 | PDF 95.9 KB |
| Confidentiality Request | Attestation Statements | 2011-03-16 | PDF 34.7 KB |
| Confidentiality Request Letter | Attestation Statements | 2011-03-16 | PDF 34.7 KB |
| Modular Approval Cover | Attestation Statements | 2011-03-16 | PDF 20.4 KB |
| Modular Letter | Attestation Statements | 2011-03-16 | PDF 20.4 KB |
| no Ad-Hoc Attestation | Attestation Statements | 2011-03-16 | PDF 27.3 KB |
| Agent authorization | Cover Letter(s) | 2011-06-16 | PDF 71.3 KB |
| Host label format | Cover Letter(s) | 2011-06-16 | PDF 1.1 MB |
| Request for C2PC | Cover Letter(s) | 2011-06-16 | PDF 29 KB |
| Request for C2PC filing | Cover Letter(s) | 2011-06-16 | PDF 29 KB |
| Request for confidentiality | Cover Letter(s) | 2011-06-16 | PDF 23.5 KB |
| TCB Q and A | Cover Letter(s) | 2011-06-16 | PDF 56.9 KB |
| Antenna specification | Parts List/Tune Up Info | 2011-06-16 | PDF 499.8 KB |
| RF exposure Info 1 of 5 | RF Exposure Info | 2011-06-16 | PDF 367.3 KB |
| RF exposure Info 2 of 5 | RF Exposure Info | 2011-06-16 | PDF 1.4 MB |
| RF exposure Info 4 of 5 | RF Exposure Info | 2011-06-16 | PDF 576.4 KB |
| RF exposure Info 5 of 5 | RF Exposure Info | 2011-06-16 | PDF 1.4 MB |
| RF exposure Info3 of 5 | RF Exposure Info | 2011-06-16 | PDF 183.6 KB |
Application Information
| Application ID | dStPq1nnso5I5bxIX+QrtQ== |
|---|---|
| Final Action Date | 2011-06-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007091952 |
| Model | -BRCM1056 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11b/g/n WLAN + Bluetooth Module Combo |
| Responsible Party | Daniel Lawless, Director of Engineering, System Operations, ComplianceEngineering-list-CA-list@broadcom.com , 408-543-3300 |
| Test Firm | Kurt Chen, Compliance Certification Services Inc., kurt.chen@ccsrf.com  , 886-3-3240332 |
| TCB Email | certnotice@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/01/2011 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add the portable configuration as documented in this filing. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| dStPq1nnso5I5bxIX+QrtQ== | 2011-06-16 | Class II permissive change or modification of presently authorized equipment |
| TJqaU1Zrn3YQmhjPKDMZSQ== | 2011-06-16 | Class II permissive change or modification of presently authorized equipment |
| q5kMuMTbSREqjR2fCxrqUw== | 2011-03-16 | Original Equipment |
| 6F8Mqi4mHSvUfaZnQ3WdkQ== | 2011-03-16 | Original Equipment |
| 5ayIh6eXjazYBh2W7USrrg== | 2011-03-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TJqaU1Zrn3YQmhjPKDMZSQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/16/2011 Application Dated: 06/16/2011 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.472 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.296 |
| Class II Permissive Change to add the portable configuration as documented in this filing. The highest measured SAR documented in this filing is 1.37W/kg.Power listed is the conducted. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TJqaU1Zrn3YQmhjPKDMZSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 06/16/2011 Application Dated: 06/16/2011 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.472 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.296 |
| Class II Permissive Change to add the portable configuration as documented in this filing. The highest measured SAR documented in this filing is 1.37W/kg.Power listed is the conducted. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/16/2011 Application Dated: 03/16/2011 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.472 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.296 |
| Power listed is the conducted. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application q5kMuMTbSREqjR2fCxrqUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 03/16/2011 Application Dated: 03/16/2011 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.472 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.296 |
| Power listed is the conducted. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/16/2011 Application Dated: 06/16/2011 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0015 |
| Class II Permissive Change to add the portable configuration as documented in this filing. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application dStPq1nnso5I5bxIX+QrtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 06/16/2011 Application Dated: 06/16/2011 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0015 |
| Class II Permissive Change to add the portable configuration as documented in this filing. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/16/2011 Application Dated: 03/16/2011 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 6F8Mqi4mHSvUfaZnQ3WdkQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 03/16/2011 Application Dated: 03/16/2011 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/16/2011 Application Dated: 03/16/2011 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0015 |
| Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 5ayIh6eXjazYBh2W7USrrg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 03/16/2011 Application Dated: 03/16/2011 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1056 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b/g/n WLAN + Bluetooth Module Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0015 |
| Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |