FCC ID QDS-BRCM1067
Tablet
by Broadcom Corporation
Grantee Code: QDS Product Code: BRCM1067
Latest application date: 2014-07-28
FCC ID Device Details
| FCC ID | QDS-BRCM1067 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QDS |
| Product Code | BRCM1067 |
| Applicant Business | Broadcom Corporation 🇺🇸 |
| Related Domains |  broadcom.com |
| Equipment Class | Tablet |
| Test Firm | Compliance Certification Services Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2014-07-28 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2014-07-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2014-07-28 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-02-06 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-02-06 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-10-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-10-19 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-10-19 |
| 5180-5240 MHz | Original Equipment | 2012-07-31 |
| 2412-2462 MHz | Original Equipment | 2012-07-31 |
| 2402-2480 MHz | Original Equipment | 2012-07-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| INP-110Q User Manual | Users Manual | 2014-10-31 | PDF 1,017.5 KB |
| Users Manual | Users Manual | 2013-08-05 | PDF 1.3 MB |
| USERS MANUAL HOST | Users Manual | 2013-04-15 | PDF 1.1 MB |
| USERS MANUAL MODULE | Users Manual | 2013-04-15 | PDF 160.4 KB |
| Users Manual Host | Users Manual | 2013-04-15 | PDF 1.1 MB |
| Users Manual Module | Users Manual | 2013-04-15 | PDF 160.4 KB |
| User Manual | Users Manual | 2013-01-28 | PDF 423.7 KB |
| INP-110Q Internal Photo | Internal Photos | 2014-10-31 | PDF 846.9 KB |
| Internal Photos - 1 | Internal Photos | 2013-08-05 | PDF 5.2 MB |
| Internal Photos - 2 | Internal Photos | 2013-08-05 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2013-04-15 | PDF 2.2 MB |
| Internal Photos | Internal Photos | 2013-01-28 | PDF 188.2 KB |
| INP-110Q External Photo | External Photos | 2014-10-31 | PDF 414 KB |
| External Photos - Host | External Photos | 2013-08-05 | PDF 1.3 MB |
| External Photos | External Photos | 2013-04-15 | PDF 1.3 MB |
| External Photos | External Photos | 2013-01-28 | PDF 396.6 KB |
| Label Sample & Location for Module | ID Label/Location Info | 2014-07-28 | PDF 95.3 KB |
| Label Sample & Location for system | ID Label/Location Info | 2014-07-28 | PDF 528.4 KB |
| Label | ID Label/Location Info | 2013-02-06 | PDF 93.7 KB |
| Label Location | ID Label/Location Info | 2013-02-06 | PDF 67 KB |
| LABEL SAMPLE AND LOCATION | ID Label/Location Info | 2012-10-19 | PDF 23.3 KB |
| Label Info | ID Label/Location Info | 2012-10-19 | PDF 23.3 KB |
| FCC ID Label & Label Location | ID Label/Location Info | 2012-07-31 | PDF 71.3 KB |
| INP-110Q SAR Setup Photos | Test Setup Photos | 2014-10-31 | PDF 222.5 KB |
| INP-110Q Test Setup Photo | Test Setup Photos | 2014-10-31 | PDF 334.4 KB |
| Test Setup Photos - RF | Test Setup Photos | 2013-08-05 | PDF 147.8 KB |
| Test Setup Photos - SAR | Test Setup Photos | 2013-08-05 | PDF 391.4 KB |
| RF EXPOSURE PHOTOS | Test Setup Photos | 2013-04-15 | PDF 769 KB |
| RF Exposure Photos | Test Setup Photos | 2013-04-15 | PDF 769 KB |
| Test Setup Photos for DFS | Test Setup Photos | 2013-01-28 | PDF 151.4 KB |
| Test Setup Photos for RF | Test Setup Photos | 2013-01-28 | PDF 432.6 KB |
| SAR Test Report | RF Exposure Info | 2014-07-28 | PDF 1.3 MB |
| Test Report (BT 15.247) | Test Report | 2013-02-06 | PDF 1 MB |
| Test Report (WLAN 15.247) | Test Report | 2013-02-06 | PDF 966.2 KB |
| Test Report (WLAN 15.407) | Test Report | 2013-02-06 | PDF 573.1 KB |
| Co-location Report | Test Report | 2012-07-31 | PDF 110.5 KB |
| Test report for DFS | Test Report | 2012-07-31 | PDF 943.1 KB |
| Test report for DSS | Test Report | 2012-07-31 | PDF 1.4 MB |
| Test report for DSS_BT4.0 | Test Report | 2012-07-31 | PDF 1.1 MB |
| Test report for DTS_WLAN | Test Report | 2012-07-31 | PDF 1.5 MB |
| Test report for NII | Test Report | 2012-07-31 | PDF 1.9 MB |
| Class II permissive change letter Revised 0725 | Attestation Statements | 2014-07-28 | PDF 15.2 KB |
| Attestation - Power Declaration | Attestation Statements | 2013-02-06 | PDF 41.8 KB |
| FCC (DoC) Revised 0725 | Cover Letter(s) | 2014-07-28 | PDF 71 KB |
| INP-110Q Authorization letter | Cover Letter(s) | 2014-07-28 | PDF 25.8 KB |
| INP-110Q Confidentiality Letter | Cover Letter(s) | 2014-07-28 | PDF 13.8 KB |
| INP-110Q POA | Cover Letter(s) | 2014-07-28 | PDF 19.1 KB |
| Confidentiality Request | Cover Letter(s) | 2013-02-06 | PDF 26.3 KB |
| Cover Letter - Agent Authorization | Cover Letter(s) | 2013-02-06 | PDF 22.4 KB |
| Cover Letter - Class II Permissive Change | Cover Letter(s) | 2013-02-06 | PDF 21.2 KB |
| Cover Letter - DoC | Cover Letter(s) | 2013-02-06 | PDF 18.3 KB |
| C2PC LETTER | Cover Letter(s) | 2012-10-19 | PDF 32.1 KB |
| CONFIDENTIAL REQUEST LETTER | Cover Letter(s) | 2012-10-19 | PDF 44.7 KB |
| Class II Letter | Cover Letter(s) | 2012-10-19 | PDF 32.1 KB |
| Confidential Letter | Cover Letter(s) | 2012-10-19 | PDF 44.7 KB |
| POA | Cover Letter(s) | 2012-10-19 | PDF 25.2 KB |
| Declaration Letter for Module Approval | Cover Letter(s) | 2012-07-31 | PDF 469.9 KB |
| Declaration Letter for TPC | Cover Letter(s) | 2012-07-31 | PDF 22.6 KB |
| Declaration Letter_For Ad Hoc | Cover Letter(s) | 2012-07-31 | PDF 27.1 KB |
| LTC & STC request letter | Cover Letter(s) | 2012-07-31 | PDF 34.8 KB |
| POA | Cover Letter(s) | 2012-07-31 | PDF 61 KB |
| SAR report attachment _1 | RF Exposure Info | 2014-07-28 | PDF 3.8 MB |
| SAR report attachment_ 2 | RF Exposure Info | 2014-07-28 | PDF 3.8 MB |
| RF Exposure Info - WLAN SAR | RF Exposure Info | 2013-02-06 | PDF 4.7 MB |
| RF EXPOSURE APPENDIX A | RF Exposure Info | 2012-10-19 | PDF 264.1 KB |
| RF EXPOSURE APPENDIX B | RF Exposure Info | 2012-10-19 | PDF 664.4 KB |
| RF EXPOSURE APPENDIX C1 | RF Exposure Info | 2012-10-19 | PDF 3.2 MB |
| RF EXPOSURE APPENDIX C2 | RF Exposure Info | 2012-10-19 | PDF 3.5 MB |
| RF Exposure | RF Exposure Info | 2012-10-19 | PDF 1 MB |
| RF Exposure | RF Exposure Info | 2012-10-19 | PDF 1.1 MB |
| RF Exposure Appendix A | RF Exposure Info | 2012-10-19 | PDF 264.1 KB |
| RF Exposure Appendix B | RF Exposure Info | 2012-10-19 | PDF 664.4 KB |
| RF Exposure Appendix C1 | RF Exposure Info | 2012-10-19 | PDF 3.2 MB |
| RF Exposure Appendix C2 | RF Exposure Info | 2012-10-19 | PDF 3.5 MB |
| MPE Report | RF Exposure Info | 2012-07-31 | PDF 106.1 KB |
| INP-110Q Block Diagram Metadata only | Block Diagram | PDF 58.6 KB | |
| INP-110Q Schematics Metadata only | Schematics | PDF 549.4 KB | |
| INP-110Q Antenna Specification Metadata only | Operational Description | PDF 458.7 KB | |
| INP-110Q Operation Description Metadata only | Operational Description | PDF 72.2 KB |
Application Information
| Application ID | baxKTOSxfLmJGlZspUd7ew== |
|---|---|
| Final Action Date | 2014-07-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007091952 |
| Model | BRCM1067 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Tablet |
| Responsible Party | Anne Liang, Manager, Compliance Engineering, aliang@broadcom.com , 4089225890 |
| Test Firm | Hank Lee, Compliance Certification Services Inc., hank.lee@sgs.com  , 886-2-22999720 |
| TCB Email | nathan.emery@babt.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/31/2014 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet with model number: INP-110Q shown in this filing only by OEM or OEM integrators – user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| baxKTOSxfLmJGlZspUd7ew== | 2014-07-28 | Class II permissive change or modification of presently authorized equipment |
| TDhOWYrrzwYwcH0W03ZSRg== | 2014-07-28 | Class II permissive change or modification of presently authorized equipment |
| MTObN3ivQREaAxEM7KvMZA== | 2014-07-28 | Class II permissive change or modification of presently authorized equipment |
| xXSESVxxbeW7qdE6V57hJQ== | 2013-02-06 | Class II permissive change or modification of presently authorized equipment |
| Rr/zHd/wBqXvTZzxkj9EjA== | 2013-02-06 | Class II permissive change or modification of presently authorized equipment |
| tsEZrV46mKNV+iHydLYVeg== | 2012-10-19 | Class II permissive change or modification of presently authorized equipment |
| eDPS1iTMFtdF+99CCaRXXw== | 2012-10-19 | Class II permissive change or modification of presently authorized equipment |
| HNt/rPB+T1AApbjNggiO8Q== | 2012-10-19 | Class II permissive change or modification of presently authorized equipment |
| zovHs57kvlZro0sRiOUM8w== | 2012-07-31 | Original Equipment |
| cAs5sPAOrVTIv9uLLdzxBw== | 2012-07-31 | Original Equipment |
| 69KHQmGVgOzT8P2jMHCY8Q== | 2012-07-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zovHs57kvlZro0sRiOUM8w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/31/2012 Application Dated: 07/31/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 abgn WLAN+Bluetooth Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.021 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.022 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application zovHs57kvlZro0sRiOUM8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 07/31/2012 Application Dated: 07/31/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 abgn WLAN+Bluetooth Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.021 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.022 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 02/06/2013 Application Dated: 02/06/2013 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 abgn WLAN & BLUETOOTH CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.179 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.125 |
| Class II Permissive Change for adding a tablet host, VIZIO Model: MT11X-A1, as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission use conditions are 1.17 W/kg and 1.27 W/kg, respectively. Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xXSESVxxbeW7qdE6V57hJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 02/06/2013 Application Dated: 02/06/2013 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 abgn WLAN & BLUETOOTH CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.179 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.125 |
| Class II Permissive Change for adding a tablet host, VIZIO Model: MT11X-A1, as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission use conditions are 1.17 W/kg and 1.27 W/kg, respectively. Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/19/2012 Application Dated: 10/17/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 abgn WLAN+BLUETOOTH CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.179 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.125 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. (07/31/2012) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to add this module to a portable platform, HP TPN-P104 FCC ID:B94TNP104. The Highest reported SAR value is 0.40W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application tsEZrV46mKNV+iHydLYVeg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 10/19/2012 Application Dated: 10/17/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 abgn WLAN+BLUETOOTH CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.179 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.125 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. (07/31/2012) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to add this module to a portable platform, HP TPN-P104 FCC ID:B94TNP104. The Highest reported SAR value is 0.40W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 07/28/2014 Application Dated: 07/28/2014 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Tablet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.179 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.125 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet with model number: INP-110Q shown in this filing only by OEM or OEM integrators – user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value is 1.347 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TDhOWYrrzwYwcH0W03ZSRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 07/28/2014 Application Dated: 07/28/2014 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Tablet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.179 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.125 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet with model number: INP-110Q shown in this filing only by OEM or OEM integrators – user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value is 1.347 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 02/06/2013 Application Dated: 02/06/2013 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 abgn WLAN & BLUETOOTH CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.021 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.022 |
| Class II Permissive Change for adding a tablet host, VIZIO Model: MT11X-A1, as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission use conditions are 1.24 W/kg and 1.34 W/kg, respectively. Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Rr/zHd/wBqXvTZzxkj9EjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 02/06/2013 Application Dated: 02/06/2013 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 abgn WLAN & BLUETOOTH CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.021 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.022 |
| Class II Permissive Change for adding a tablet host, VIZIO Model: MT11X-A1, as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission use conditions are 1.24 W/kg and 1.34 W/kg, respectively. Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 07/28/2014 Application Dated: 07/28/2014 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Tablet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.021 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.022 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet with model number: INP-110Q shown in this filing only by OEM or OEM integrators – user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value is 1.328 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application MTObN3ivQREaAxEM7KvMZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 07/28/2014 Application Dated: 07/28/2014 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Tablet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.021 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.022 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet with model number: INP-110Q shown in this filing only by OEM or OEM integrators – user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value is 1.328 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/19/2012 Application Dated: 10/17/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 abgn WLAN+BLUETOOTH CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.021 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.022 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. (07/31/2012) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to add this module to a portable platform, HP TPN-P104 FCC ID:B94TNP104. The Highest reported SAR value is 0.42W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application HNt/rPB+T1AApbjNggiO8Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 10/19/2012 Application Dated: 10/17/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 abgn WLAN+BLUETOOTH CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.021 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.022 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. (07/31/2012) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to add this module to a portable platform, HP TPN-P104 FCC ID:B94TNP104. The Highest reported SAR value is 0.42W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/19/2012 Application Dated: 10/17/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ABGN WLAN+BLUETOOTH CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (07/31/2012) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to add this module to a portable platform, HP TPN-P104 FCC ID:B94TNP104. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application eDPS1iTMFtdF+99CCaRXXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 10/19/2012 Application Dated: 10/17/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ABGN WLAN+BLUETOOTH CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (07/31/2012) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to add this module to a portable platform, HP TPN-P104 FCC ID:B94TNP104. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/31/2012 Application Dated: 07/31/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 abgn WLAN+Bluetooth Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.179 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.125 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application cAs5sPAOrVTIv9uLLdzxBw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 07/31/2012 Application Dated: 07/31/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 abgn WLAN+Bluetooth Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.179 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.125 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 07/28/2014 Application Dated: 07/28/2014 |
| Broadcom Corporation |
| 270 Innovation Drive |
| San Jose, CA 95134 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Tablet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet with model number: INP-110Q shown in this filing only by OEM or OEM integrators – user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application baxKTOSxfLmJGlZspUd7ew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States |
Date of Grant: 07/28/2014 Application Dated: 07/28/2014 |
| Attention: Anne Liang , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Tablet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet with model number: INP-110Q shown in this filing only by OEM or OEM integrators – user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/31/2012 Application Dated: 07/31/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 abgn WLAN+Bluetooth Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 69KHQmGVgOzT8P2jMHCY8Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 07/31/2012 Application Dated: 07/31/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1067 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 abgn WLAN+Bluetooth Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |