FCC ID QDS-BRCM1070

802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combination Card

by Broadcom Corporation

Grantee Code: QDS   Product Code: BRCM1070
Latest application date: 2016-01-27

FCC ID Device Details

FCC IDQDS-BRCM1070
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQDS
Product CodeBRCM1070
Applicant BusinessBroadcom Corporation 🇺🇸
Related Domains broadcom.com ul.com
Equipment Class802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combination Card
Test FirmUL Verification Services Inc. (formerly UL CCS)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-01-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2014-05-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2014-05-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2013-08-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2013-08-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2013-04-26
2402-2480 MHzOriginal Equipment2013-02-08
2402-2480 MHzOriginal Equipment2013-02-08
5180-5240 MHzOriginal Equipment2013-02-08

Exhibits

DocumentTypeAvailableFile
Installation instructions to OEMUsers Manual2013-08-04PDF 111.1 KB
OEM Installation GuideUsers Manual2013-08-04PDF 111.1 KB
User ManualUsers Manual2013-08-04PDF 768 KB
Internal PhotosInternal Photos2013-08-04PDF 77 KB
External PhotosExternal Photos2014-02-17PDF 385.7 KB
External PhotoExternal Photos2013-08-04PDF 134.3 KB
External PhotosExternal Photos2013-08-04PDF 134.3 KB
ID Label and locationID Label/Location Info2013-02-08PDF 29.2 KB
Label and LocationID Label/Location Info2013-02-08PDF 29.2 KB
Label and label locationID Label/Location Info2013-02-08PDF 29.2 KB
15U22130-E1V3 FCC SETUP PHOTOS UNII WLAN_C2PC_5.8 Band HIGH GAIN 0114.pdfTest Setup Photos2016-07-13PDF 363.1 KB
15U22130-E2V3 FCC SETUP PHOTOS UNII WLAN_C2PC_5.8 Band LOW GAIN 0126.pdfTest Setup Photos2016-07-13PDF 471.8 KB
BLE_Setup photoTest Setup Photos2014-11-02PDF 187.1 KB
BLUETOOTH_Setup PhotosTest Setup Photos2014-11-02PDF 122.7 KB
Test Set Up PhotosTest Setup Photos2014-02-17PDF 86.3 KB
Test Set Up PhotosTest Setup Photos2014-02-17PDF 86.4 KB
Test set up photosTest Setup Photos2014-02-17PDF 53.2 KB
Test Set UpTest Setup Photos2013-10-20PDF 143 KB
Test Set UpTest Setup Photos2013-08-04PDF 634.8 KB
Test Set Up (LE)Test Setup Photos2013-08-04PDF 323.3 KB
Test Set Up WiFiTest Setup Photos2013-08-04PDF 472.7 KB
Test Set up photosTest Setup Photos2013-08-04PDF 193.2 KB
Test Set up photosTest Setup Photos2013-08-04PDF 323.8 KB
15U22130-E1V3 FCC REPORT UNII WLAN_C2PC_5.8 Band HIGH GAIN 0114.pdfTest Report2016-01-27PDF 4.4 MB
15U22130-E2V3 FCC REPORT UNII WLAN_C2PC_5.8 Band LOW GAIN 0126.pdfTest Report2016-01-27PDF 4.5 MB
BLE ReportTest Report2014-05-06PDF 1.1 MB
BLUETOOTH C2PC ReportTest Report2014-05-06PDF 1.5 MB
Test ReportTest Report2013-08-21PDF 3.3 MB
Test Report - high gain antennaTest Report2013-08-21PDF 3.9 MB
Test Report - lower gain antennaTest Report2013-08-21PDF 3.6 MB
MPE ExhibitTest Report2013-04-26PDF 192.1 KB
Test Report Part 1 of 2Test Report2013-04-26PDF 3.7 MB
Test Report Part 2 of 2Test Report2013-04-26PDF 5.4 MB
Test ReportTest Report2013-02-08PDF 1.3 MB
Test ReportTest Report2013-02-08PDF 450.2 KB
Test Report - 802.11Test Report2013-02-08PDF 5.1 MB
Test Report - Bluetooth LETest Report2013-02-08PDF 750.9 KB
Test Report part 1 of 2Test Report2013-02-08PDF 5.1 MB
Test Report part 2 of 2Test Report2013-02-08PDF 4.1 MB
Attestation for KDB 644545Attestation Statements2013-04-26PDF 45.9 KB
802.11ac attestations (KDB644545)Attestation Statements2013-02-08PDF 50 KB
Passive-active scanning KDB848637Attestation Statements2013-02-08PDF 26.6 KB
TCB Q&A finalAttestation Statements2013-02-08PDF 138.4 KB
TCB Q&A revisedAttestation Statements2013-02-08PDF 138.4 KB
BCM94360CD FCC C2PC (New FCC UNII rule).pdfCover Letter(s)2016-01-27PDF 206.8 KB
BCM94360CD FCC conf req (New FCC UNII rule).pdfCover Letter(s)2016-01-27PDF 257.3 KB
FCC Agent Authorization Letter (UL) Sept 2015.pdfCover Letter(s)2016-01-27PDF 537.4 KB
C2PC LetterCover Letter(s)2014-05-06PDF 50 KB
authorization letterCover Letter(s)2014-05-06PDF 62.6 KB
conf requestCover Letter(s)2014-05-06PDF 30.1 KB
Agent AuthorizationCover Letter(s)2013-08-21PDF 62.6 KB
C2PC RequestCover Letter(s)2013-08-21PDF 54.3 KB
TCB Q&ACover Letter(s)2013-08-21PDF 204.7 KB
revised Confidentiality LetterCover Letter(s)2013-08-21PDF 29.9 KB
C2PC RequestCover Letter(s)2013-04-26PDF 54 KB
Confidentiality RequestCover Letter(s)2013-04-26PDF 66.4 KB
Agent authorizationCover Letter(s)2013-02-08PDF 62.6 KB
Confidentiaility RequestCover Letter(s)2013-02-08PDF 34.1 KB
Modular Approval RequestCover Letter(s)2013-02-08PDF 29.1 KB
Modular Approval requestCover Letter(s)2013-02-08PDF 29.1 KB
15U22130-E3V1-FCC REPORT RF EXPOSURE 0112.pdfRF Exposure Info2016-01-27PDF 249.6 KB
RF EXPOSURE ReportRF Exposure Info2014-05-06PDF 237.3 KB
MPE ExhibitRF Exposure Info2013-08-21PDF 236.6 KB
MPE CalculationsRF Exposure Info2013-02-08PDF 192.1 KB
MPE ExhibitRF Exposure Info2013-02-08PDF 192.1 KB
BCM94360CD_X51_FCC operational_description_HighGain_Update_5.8_Power.pdf Metadata onlyOperational DescriptionPDF 314.4 KB
BCM94360CD_X51_FCC operational_description_LowGain_Update_5.8_Power (1-26-16).pd Metadata onlyOperational DescriptionPDF 357.4 KB
KDB 594280 D02 v01r03 U-NII Device SW Security Statement (BRCM) 0112.pdf Metadata onlyOperational DescriptionPDF 76.3 KB
WLAN Antenna Spec (Host 5) Metadata onlyOperational DescriptionPDF 738.7 KB
WLAN Antenna Spec (Host4) Metadata onlyOperational DescriptionPDF 5.7 MB

Application Information

Application IDnZ5nn8xZxA3B9I4NL7YQXw==
Final Action Date2016-01-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007091952
ModelBRCM1070
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combination Card
Responsible PartyAnne Liang, Manager, Compliance Engineering, aliang@broadcom.com , 4089225890
Technical ContactAna Aumentado, UL VERIFICATION SERVICES INC., Ana.M.Aumentado@ul.com , 510.771.1087
Non-Technical ContactAna Aumentado, UL VERIFICATION SERVICES INC., Ana.M.Aumentado@ul.com , 510.771.1087
Test FirmJay Kogoma, UL Verification Services Inc. (formerly UL CCS), jay.kogoma@ul.com , 510-319-4135
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/13/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to add U-NII-3 Band. Output power listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
nZ5nn8xZxA3B9I4NL7YQXw==2016-01-27Class II permissive change or modification of presently authorized equipment
j5HKjE0x454aOHfuO5Z8Xw==2014-05-06Class II permissive change or modification of presently authorized equipment
XO4zlkgAlg+FpDxJyTD1eA==2014-05-06Class II permissive change or modification of presently authorized equipment
iGiV5RFrZWWHNayt4DYfaQ==2013-08-21Class II permissive change or modification of presently authorized equipment
8wzeYBcPsayIEIv1mJFlMA==2013-08-21Class II permissive change or modification of presently authorized equipment
RirQqg9/OMAMJzqKO1vT8g==2013-04-26Class II permissive change or modification of presently authorized equipment
api6+gB9+Sg4QdKg4xgIVQ==2013-02-08Original Equipment
TdjSsm9/dPkKpz0/x/hKYw==2013-02-08Original Equipment
OVk6VNBYUNmN1Mq2tg6j0g==2013-02-08Original Equipment
7AcASc+bjYpIl29/PFgAig==2013-02-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.007500015CCC
2402-2480 MHz0.002815CCC
2412-2462 MHz0.42615CCC, MO
2412-2472 MHz0.42615C36, CC, MO
5180-5240 MHz0.049315E36, 38, CC, MO
5180-5240 MHz0.049315ECC, MO
5180-5240 MHz0.049315E36, CC, MO
5260-5320 MHz0.24815E36, 38, CC, MO
5260-5320 MHz0.24815ECC, MO
5260-5320 MHz0.24815E36, CC, MO
5500-5720 MHz0.25915E36, 38, CC, MO
5500-5700 MHz0.24915ECC, MO
5500-5700 MHz0.24915E36, CC, MO
5690-5720 MHz0.25915E36, CC, MO
5690-5720 MHz0.25915ECC, MO
5710-5720 MHz0.25915ECC, MO
5745-5825 MHz0.58115CCC, MO
5745-5825 MHz0.58115C36, CC, MO
5745-5825 MHz0.37615E36, 38, CC, MO

Grants

TCB Grant - Application XO4zlkgAlg+FpDxJyTD1eA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/06/2014

Application Dated: 05/06/2014
Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  

C2PC to add higher gain antennas as documented in this filing for Bluetooth transmit chain.

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application XO4zlkgAlg+FpDxJyTD1eA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States
  Date of Grant: 05/06/2014

Application Dated: 05/06/2014
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  

C2PC to add higher gain antennas as documented in this filing for Bluetooth transmit chain.

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application TdjSsm9/dPkKpz0/x/hKYw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/08/2013

Application Dated: 02/08/2013
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.426  
CC MO 15C 5745.0  -  5825.0 0.581  
CC 15C 2402.0  -  2480.0 0.0028  

Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in the 5GHz bands. Only 20MHz bandwidths are supported in the 2.4GHz band for the 2412-2462 MHz line item. 2402-2480MHz is for Bluetooth LE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application TdjSsm9/dPkKpz0/x/hKYw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 02/08/2013

Application Dated: 02/08/2013
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.426  
CC MO 15C 5745.0  -  5825.0 0.581  
CC 15C 2402.0  -  2480.0 0.0028  

Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in the 5GHz bands. Only 20MHz bandwidths are supported in the 2.4GHz band for the 2412-2462 MHz line item. 2402-2480MHz is for Bluetooth LE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application RirQqg9/OMAMJzqKO1vT8g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/26/2013

Application Dated: 04/24/2013
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0493  
CC MO 15E 5260.0  -  5320.0 0.248  
CC MO 15E 5500.0  -  5700.0 0.249  
CC MO 15E 5690.0  -  5720.0 0.259  

C2PC to add 80MHz bandwidths in the 5250-5350 and 5470-5725 MHz bands, including channel 138. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application RirQqg9/OMAMJzqKO1vT8g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 04/26/2013

Application Dated: 04/24/2013
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0493  
CC MO 15E 5260.0  -  5320.0 0.248  
CC MO 15E 5500.0  -  5700.0 0.249  
CC MO 15E 5690.0  -  5720.0 0.259  

C2PC to add 80MHz bandwidths in the 5250-5350 and 5470-5725 MHz bands, including channel 138. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application OVk6VNBYUNmN1Mq2tg6j0g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/08/2013

Application Dated: 02/08/2013
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application OVk6VNBYUNmN1Mq2tg6j0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 02/08/2013

Application Dated: 02/08/2013
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nZ5nn8xZxA3B9I4NL7YQXw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/27/2016

Application Dated: 01/27/2016
Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combination Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 38 CC MO 15E 5180.0  -  5240.0 0.0493  
36 38 CC MO 15E 5260.0  -  5320.0 0.248  
36 38 CC MO 15E 5500.0  -  5720.0 0.259  
36 38 CC MO 15E 5745.0  -  5825.0 0.376  

C2PC to add U-NII-3 Band. Output power listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application nZ5nn8xZxA3B9I4NL7YQXw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States
  Date of Grant: 01/27/2016

Application Dated: 01/27/2016
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combination Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 38 CC MO 15E 5180.0  -  5240.0 0.0493  
36 38 CC MO 15E 5260.0  -  5320.0 0.248  
36 38 CC MO 15E 5500.0  -  5720.0 0.259  
36 38 CC MO 15E 5745.0  -  5825.0 0.376  

C2PC to add U-NII-3 Band. Output power listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application j5HKjE0x454aOHfuO5Z8Xw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/06/2014

Application Dated: 05/06/2014
Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.426  
CC MO 15C 5745.0  -  5825.0 0.581  
CC 15C 2402.0  -  2480.0 0.0028  

C2PC to add higher gain antennas as documented in this filing for Bluetooth transmit chain.

Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in the 5GHz bands. Only 20MHz bandwidths are supported in the 2.4GHz band for the 2412-2472 MHz line item. 2402-2480MHz is for Bluetooth LE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application j5HKjE0x454aOHfuO5Z8Xw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States
  Date of Grant: 05/06/2014

Application Dated: 05/06/2014
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.426  
CC MO 15C 5745.0  -  5825.0 0.581  
CC 15C 2402.0  -  2480.0 0.0028  

C2PC to add higher gain antennas as documented in this filing for Bluetooth transmit chain.

Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in the 5GHz bands. Only 20MHz bandwidths are supported in the 2.4GHz band for the 2412-2472 MHz line item. 2402-2480MHz is for Bluetooth LE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application iGiV5RFrZWWHNayt4DYfaQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/21/2013

Application Dated: 08/19/2013
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC MO 15E 5180.0  -  5240.0 0.0493  
36 CC MO 15E 5260.0  -  5320.0 0.248  
36 CC MO 15E 5500.0  -  5700.0 0.249  
36 CC MO 15E 5690.0  -  5720.0 0.259  

C2PC to add higher gain antennas documented in this filing. This C2PC also incorporates previous C2PC (4/26/2013) to include 80MHz bandwidth capabilities. Output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application iGiV5RFrZWWHNayt4DYfaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 08/21/2013

Application Dated: 08/19/2013
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC MO 15E 5180.0  -  5240.0 0.0493  
36 CC MO 15E 5260.0  -  5320.0 0.248  
36 CC MO 15E 5500.0  -  5700.0 0.249  
36 CC MO 15E 5690.0  -  5720.0 0.259  

C2PC to add higher gain antennas documented in this filing. This C2PC also incorporates previous C2PC (4/26/2013) to include 80MHz bandwidth capabilities. Output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application api6+gB9+Sg4QdKg4xgIVQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/08/2013

Application Dated: 02/08/2013
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application api6+gB9+Sg4QdKg4xgIVQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 02/08/2013

Application Dated: 02/08/2013
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8wzeYBcPsayIEIv1mJFlMA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/21/2013

Application Dated: 08/20/2013
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC MO 15C 2412.0  -  2472.0 0.426  
36 CC MO 15C 5745.0  -  5825.0 0.581  
CC 15C 2402.0  -  2480.0 0.0028  

C2PC to add operations on channels 12 and 13 for 802.11bgn operations in the 2.4GHz band and to add higher gain antennas as documented in this filing for 802.11 transmit chains. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in the 5GHz bands. Only 20MHz bandwidths are supported in the 2.4GHz band for the 2412-2472 MHz line item. 2402-2480MHz is for Bluetooth LE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 8wzeYBcPsayIEIv1mJFlMA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 08/21/2013

Application Dated: 08/20/2013
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC MO 15C 2412.0  -  2472.0 0.426  
36 CC MO 15C 5745.0  -  5825.0 0.581  
CC 15C 2402.0  -  2480.0 0.0028  

C2PC to add operations on channels 12 and 13 for 802.11bgn operations in the 2.4GHz band and to add higher gain antennas as documented in this filing for 802.11 transmit chains. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz and 80MHz bandwidths in the 5GHz bands. Only 20MHz bandwidths are supported in the 2.4GHz band for the 2412-2472 MHz line item. 2402-2480MHz is for Bluetooth LE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7AcASc+bjYpIl29/PFgAig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/08/2013

Application Dated: 02/08/2013
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0493  
CC MO 15E 5260.0  -  5320.0 0.248  
CC MO 15E 5500.0  -  5700.0 0.249  
CC MO 15E 5710.0  -  5720.0 0.259  

Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz bandwidths in all bands and also supports 80MHz bandwidths in the 5150-5250 MHz band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7AcASc+bjYpIl29/PFgAig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 02/08/2013

Application Dated: 02/08/2013
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1070
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/g/n/ac WLAN & Bluetooth PCI-E Custom Combo
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0493  
CC MO 15E 5260.0  -  5320.0 0.248  
CC MO 15E 5500.0  -  5700.0 0.249  
CC MO 15E 5710.0  -  5720.0 0.259  

Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20MHz, 40MHz bandwidths in all bands and also supports 80MHz bandwidths in the 5150-5250 MHz band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: