FCC ID QDS-BRCM1007

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 06/25/2003 Application Dated: 06/25/2003

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Dual-Band Wireless LAN Mini PCI Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5320.0	0.158

In this Class II permissive change filing, two alternate antennas are included and to be used with specific notebook computer as mobile device per section 2.1091 of FCC rules. Limited Modular Approval. Power output listed is conducted. Operations in 5.15-5.25 GHz band are restricted to indoor use only. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 06/25/2003 Application Dated: 06/25/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Dual-Band Wireless LAN Mini PCI Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5320.0	0.158

In this Class II permissive change filing, two alternate antennas are included and to be used with specific notebook computer as mobile device per section 2.1091 of FCC rules. Limited Modular Approval. Power output listed is conducted. Operations in 5.15-5.25 GHz band are restricted to indoor use only. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application qipWOXa7ZV7Nwx9NvWPz7w==

EAS Grant - Application qipWOXa7ZV7Nwx9NvWPz7w==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 06/09/2003 Application Dated: 05/19/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5320.0	0.158

Limited Modular Approval. Power output listed is conducted. Operations in 5.15-5.25 GHz band are restricted to indoor use only. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device with two antenna-system options in two notebook computers as described in the original filing, and two antenna-system options in two notebook computers as described in this filing; other configurations require separate RF exposure evaluation. The highest reported SAR value for all filings approved under this FCC ID is: 1.2 W/kg

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application OHFQnUWw73RRpcoCywjWBA==

EAS Grant - Application OHFQnUWw73RRpcoCywjWBA==

Mail To:

Lothar Schmidt, Technical Manager

CETECOM Inc.

411 Dixon Landing Road

Milpitas, CA 95035

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 06/09/2003 Application Dated: 12/20/2002

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	Dual-Band Wireless LAN Mini PCI Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.095

Limited Modular Approval. Power output listed is conducted. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device with two antenna-system options in two notebook computers as described in this filing; other configurations require separate RF exposure evaluation. The highest reported SAR value is: 0.48 W/kg.

This application was originally granted on 03/07/2003.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application K2OQcO3AY3QirLkmATobbQ==

EAS Grant - Application K2OQcO3AY3QirLkmATobbQ==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 08/31/2004 Application Dated: 06/09/2004

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Dual band WLAN mini PCI card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5745.0  -  5805.0	0.112

Limited Modular Approval. Power output listed is conducted. Operations in 5.15-5.25 GHz band are restricted to indoor use only. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Certain antenna-system options used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. SAR compliance was evaluated for device with four antenna-system options in several notebook computers as described in the original and Class II permissive change filings under this FCC ID; other configurations require separate RF exposure evaluation. The highest reported SAR value for all filings approved under this FCC ID is: 1.3 W/kg.

TCB Grant - Application JdwV2sRGzTwyeXrR6UeG7Q==

EAS Grant - Application JdwV2sRGzTwyeXrR6UeG7Q==

TCB Grant - Application IexQo1tdydHKNfKWlB/xig==

EAS Grant - Application IexQo1tdydHKNfKWlB/xig==

Mail To:

Harpreet Sidhu, EMC & Radio Engineer

Cetecom Inc.

411 Dixon landing rd

Milpitas, CA 95035

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 02/20/2004 Application Dated: 12/05/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	Dual-band WLAN Mini PCI card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.095

Limited Modular Approval. Power output listed is conducted. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Certain antenna-system options used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. SAR compliance was evaluated for device with four antenna-system options in several notebook computers as described in the original and previous Class II permissive change filings; other configurations require separate RF exposure evaluation. The highest reported SAR value for all filings approved under this FCC ID is: 0.83 W/kg.

TCB Grant - Application DYlkXgDfgHb/V/5qIn/eig==

EAS Grant - Application DYlkXgDfgHb/V/5qIn/eig==

Mail To:

Lothar Schmidt, Technical Manager

CETECOM Inc.

411 Dixon Landing Road

Milpitas, CA 95035

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 06/09/2003 Application Dated: 04/16/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	Dual-Band Wireless LAN Mini PCI Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.095

Limited Modular Approval. Power output listed is conducted. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device with two antenna-system options in two notebook computers as described in the original filing, and two antenna-system options in two notebook computers as described in this filing; other configurations require separate RF exposure evaluation. The highest reported SAR value for all filings approved under this FCC ID is: 0.82 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application ACZOi3O44KtU4nEarYFelg==

Mail To:

Lothar Schmidt,

CETECOM Inc.

411 Dixon Landing Road

Milpitas, CA 95035

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 06/25/2003 Application Dated: 06/25/2003

Broadcom Corporation

270 Innovation Drive

San Jose, CA 95134

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	Dual-Band Wireless LAN Mini PCI Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.095

In this Class II permissive change filing, two alternate antennas are included and to be used with specific notebook computer as mobile device per section 2.1091 of FCC rules. Limited Modular Approval. Power output listed is conducted. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 06/25/2003 Application Dated: 06/25/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Digital Transmission System
Notes:	Dual-Band Wireless LAN Mini PCI Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.095

In this Class II permissive change filing, two alternate antennas are included and to be used with specific notebook computer as mobile device per section 2.1091 of FCC rules. Limited Modular Approval. Power output listed is conducted. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 7GsJIOtuxoUaw89VD2VtMg==

EAS Grant - Application 7GsJIOtuxoUaw89VD2VtMg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 02/20/2004 Application Dated: 12/05/2003

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Dual-band WLAN Mini PCI card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0  -  5320.0	0.158	100.0  PM

Limited Modular Approval. Power output listed is conducted. Operations in 5.15-5.25 GHz band are restricted to indoor use only. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Certain antenna-system options used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. SAR compliance was evaluated for device with four antenna-system options in several notebook computers as described in the original and previous Class II permissive change filings; other configurations require separate RF exposure evaluation. The highest reported SAR value for all filings approved under this FCC ID is: 1.2 W/kg.

TCB Grant - Application 500K00JkWAcsFKrmaR86Lg==

EAS Grant - Application 500K00JkWAcsFKrmaR86Lg==

Mail To:

Lothar Schmidt, Technical Manager

CETECOM Inc.

411 Dixon Landing Road

Milpitas, CA 95035

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Broadcom Corporation 270 Innovation Drive San Jose, CA 95134 United States

Date of Grant: 03/14/2003 Application Dated: 12/20/2002

Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QDS-BRCM1007
Name of Grantee:	Broadcom Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Dual-Band Wireless LAN Mini PCI Card
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5320.0	0.158	100.0  PM

Limited Modular Approval. Power output listed is conducted. Approval is limited to OEM installation in specific notebook computers described in this filing. OEM integrators must be provided with antenna and transmitter installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device with two antenna-system options in two notebook computers as described in this filing; other configurations require separate RF exposure evaluation. The highest reported SAR value is: 1.1 W/kg.

Indoor use only.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: