FCC ID QDS-BRCM1017

QDSBRCM1017, QDS BRCM1017, QDS-BRCM1017, QDS-BRCM1O17, QDS-BRCMI0I7, QD5-BRCM1017, ODS-BRCM1017, 0DS-BRCM1017

Broadcom Corporation 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card BRCM1017

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: QDS-BRCM1017 is QDS. The remaining characters of the FCC ID, -BRCM1017, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card

App # Purpose Date Unique ID
1 Original Equipment 2005-03-08 /W/zJxch0rdhmwuJLQZrEQ==
2 Original Equipment 2005-03-08 iSSCo1nUGryH4Ys8zsPcIA==
3 Class II Permissive Change 2005-05-20 PWhzG7N3Ih3b34DJ5lw02g==
4 Class II Permissive Change 2005-05-20 xZioggkj4K8NPN05DK/6/g==
5 Class II Permissive Change 2005-05-24 im/k+bUfPXaNcJrUm0xlKQ==
6 Class II Permissive Change 2005-05-24 k9vUISOCHvcmQ2UkSSTIKA==
7 Class II Permissive Change 2005-10-04 fw3Jmlt/CdeMLQ3R8TL6Gg==
8 Class II Permissive Change 2005-10-04 x0AGQrLjWa0NYU1ah5VqLQ==
9 Class II Permissive Change 2006-01-06 giWZA6tGuVrCBnu+bNJzZQ==
10 Class II Permissive Change 2006-01-06 KKbozHPZEuVpmBQG2aVVyg==
11 Class II Permissive Change 2007-05-02 jsmueBsNcYrIYlKld5Btxw==
12 Class II Permissive Change 2007-05-02 UMXBvABrCOyALBm5kN5Uug==
13 Class II Permissive Change 2007-06-22 t1afO3GFxjDSJtOaryiFGg==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
Frequency RangePower OutputRule PartsGrant Notes App #
2.412-2.472 GHz 2.4 GHz WiFi82 mW15CCC 1.1
2.412-2.472 GHz 2.4 GHz WiFi82 mW15CCC 11.1
2.412-2.472 GHz 2.4 GHz WiFi82 mW15CCC 6.1
2.412-2.472 GHz 2.4 GHz WiFi82 mW15C 10.1
2.412-2.472 GHz 2.4 GHz WiFi82 mW15C 8.1
2.412-2.472 GHz 2.4 GHz WiFi82 mW15CCC 4.1
5.18-5.24 GHz 5 GHz WiFi19 mW15E 7.1
5.18-5.24 GHz 5 GHz WiFi19 mW15E 9.1
5.18-5.24 GHz 5 GHz WiFi19 mW15ECC 5.1
5.18-5.24 GHz 5 GHz WiFi19 mW15ECC 2.1
5.18-5.24 GHz 5 GHz WiFi19 mW15ECC 3.1
5.18-5.24 GHz 5 GHz WiFi19 mW15ECC 13.1
5.18-5.24 GHz 5 GHz WiFi19 mW15ECC, ND 12.1
5.26-5.32 GHz 5 GHz WiFi DFS27 mW15E 7.2
5.26-5.32 GHz 5 GHz WiFi DFS27 mW15E 9.2
5.26-5.32 GHz 5 GHz WiFi DFS27 mW15ECC 5.2
5.26-5.32 GHz 5 GHz WiFi DFS27 mW15ECC 2.2
5.26-5.32 GHz 5 GHz WiFi DFS27 mW15ECC 3.2
5.26-5.32 GHz 5 GHz WiFi DFS27 mW15ECC, ND 13.2
5.26-5.32 GHz 5 GHz WiFi DFS27 mW15ECC, ND 12.2
5.5-5.7 GHz 5 GHz WiFi228 mW15ECC, ND 13.3
5.745-5.825 GHz 5 GHz WiFi26 mW15CCC 1.2
5.745-5.825 GHz 5 GHz WiFi26 mW15CCC 11.2
5.745-5.825 GHz 5 GHz WiFi26 mW15CCC 6.2
5.745-5.825 GHz 5 GHz WiFi26 mW15C 10.2
5.745-5.825 GHz 5 GHz WiFi26 mW15C 8.2
5.745-5.825 GHz 5 GHz WiFi26 mW15CCC 4.2

Exhibits

Available Exhibits

App #Document Type Submitted
Available
13 Non Occupancy StatementAttestation Statements
Adobe Acrobat PDF (17 kB)
2007-08-20
2007-06-22
13 Regulatory WLAN Antenna HitachiOperational Description
Adobe Acrobat PDF (453 kB)
2007-06-22
2007-06-22
13 Test ReportTest Report
Adobe Acrobat PDF (1021 kB)
2007-06-22
2007-06-22
13 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (810 kB)
2007-06-22
2007-06-22
13 RF Exposure Info MPERF Exposure Info
Adobe Acrobat PDF (112 kB)
2007-06-22
2007-06-22
13 DFS ReportTest Report
Adobe Acrobat PDF (438 kB)
2007-06-22
2007-06-22
13 abg Antenna SpecificationOperational Description
Adobe Acrobat PDF (86 kB)
2007-06-22
2007-06-22
13 C2PC RequestCover Letter(s)
Adobe Acrobat PDF (23 kB)
2007-06-22
2007-06-22
13 Attestation Statment No Ad hoc mode and DFS AttestationAttestation Statements
Adobe Acrobat PDF (18 kB)
2007-06-22
2007-06-22
11 Host Manual 2Users Manual
Adobe Acrobat PDF (93 kB)
2007-05-02
2007-05-02
11 Host Manual 1Users Manual
Adobe Acrobat PDF (574 kB)
2007-05-02
2007-05-02
11 External PhotosExternal Photos
Adobe Acrobat PDF (1371 kB)
2007-05-02
2007-05-02
11 Antennan Specification BTParts List/Tune Up Info
Adobe Acrobat PDF (97 kB)
2007-05-02
2007-05-02
11 Antennan Specification WLANParts List/Tune Up Info
Adobe Acrobat PDF (86 kB)
2007-05-02
2007-05-02
11 Antenna Location PhotosParts List/Tune Up Info
Adobe Acrobat PDF (1060 kB)
2007-05-02
2007-05-02
11 RF Exposure InformationRF Exposure Info
Adobe Acrobat PDF (66 kB)
2007-05-02
2007-05-02
11 attestation letterCover Letter(s)
Adobe Acrobat PDF (97 kB)
2007-05-02
2007-05-02
11 Collocation Cover LetterCover Letter(s)
Adobe Acrobat PDF (93 kB)
2007-05-02
2007-05-02
11 Class II Permissive Change LetterCover Letter(s)
Adobe Acrobat PDF (23 kB)
2007-05-02
2007-05-02
11 Authorization LetterCover Letter(s)
Adobe Acrobat PDF (54 kB)
2007-05-02
2007-05-02
12 Setup PhotosTest Setup Photos
Adobe Acrobat PDF (102 kB)
2007-05-02
2007-05-02
12 ReportTest Report
Adobe Acrobat PDF (438 kB)
2007-05-02
2007-05-02
12 attestation letterCover Letter(s)
Adobe Acrobat PDF (97 kB)
2007-05-02
2007-05-02
12 Host Manual 2Users Manual
Adobe Acrobat PDF (93 kB)
2007-05-02
2007-05-02
12 Host Manual 1Users Manual
Adobe Acrobat PDF (574 kB)
2007-05-02
2007-05-02
12 Antenna Spec for BTParts List/Tune Up Info
Adobe Acrobat PDF (97 kB)
2007-05-02
2007-05-02
12 Antenna Spec for WLANParts List/Tune Up Info
Adobe Acrobat PDF (86 kB)
2007-05-02
2007-05-02
12 Antenna Location PhotosParts List/Tune Up Info
Adobe Acrobat PDF (1060 kB)
2007-05-02
2007-05-02
12 External PhotosExternal Photos
Adobe Acrobat PDF (1371 kB)
2007-05-02
2007-05-02
12 RF Exposure InformationRF Exposure Info
Adobe Acrobat PDF (66 kB)
2007-05-02
2007-05-02
12 TCB Q and ACover Letter(s)
Adobe Acrobat PDF (12 kB)
2007-05-02
2007-05-02
12 Collocation Cover LetterCover Letter(s)
Adobe Acrobat PDF (93 kB)
2007-05-02
2007-05-02
12 Class II Permissive Change LetterCover Letter(s)
Adobe Acrobat PDF (23 kB)
2007-05-02
2007-05-02
12 Authorization LetterCover Letter(s)
Adobe Acrobat PDF (54 kB)
2007-05-02
2007-05-02
10 rad channel 13Test Report
Adobe Acrobat PDF (137 kB)
2006-01-10
2006-01-06
10 Test ReportTest Report
Adobe Acrobat PDF (440 kB)
2006-01-06
2006-01-06
9 Test ReportTest Report
Adobe Acrobat PDF (440 kB)
2006-01-06
2006-01-06
9 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (413 kB)
2006-01-06
2006-01-06
9 PhotosInternal Photos
Adobe Acrobat PDF (447 kB)
2006-01-06
2006-01-06
9 Cover LetterCover Letter(s)
Adobe Acrobat PDF (17 kB)
2006-01-06
2006-01-06
10 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (413 kB)
2006-01-06
2006-01-06
10 PhotosInternal Photos
Adobe Acrobat PDF (447 kB)
2006-01-06
2006-01-06
10 Cover LetterCover Letter(s)
Adobe Acrobat PDF (17 kB)
2006-01-06
2006-01-06
8 Bluetooth labelID Label/Location Info
Adobe Acrobat PDF (341 kB)
2005-09-20
2005-10-04
8 SAR side plot setup photoRF Exposure Info
Adobe Acrobat PDF (79 kB)
2005-09-20
2005-10-04
8 SAR side plotRF Exposure Info
Adobe Acrobat PDF (104 kB)
2005-09-20
2005-10-04
8 users manualUsers Manual
Adobe Acrobat PDF (584 kB)
2005-09-20
2005-10-04
8 correspondence letterAttestation Statements
Adobe Acrobat PDF (65 kB)
2005-09-20
2005-10-04
7 SAR setup photoRF Exposure Info
Adobe Acrobat PDF (79 kB)
2005-09-20
2005-10-04
7 users manualUsers Manual
Adobe Acrobat PDF (820 kB)
2005-09-20
2005-10-04
7 SAR plotRF Exposure Info
Adobe Acrobat PDF (104 kB)
2005-09-20
2005-10-04
7 corespondence letterAttestation Statements
Adobe Acrobat PDF (69 kB)
2005-09-20
2005-10-04
7 Tablet edge at phantomRF Exposure Info
Adobe Acrobat PDF (17 kB)
2005-08-22
2005-10-04
7 Label BluetoothID Label/Location Info
Adobe Acrobat PDF (341 kB)
2005-08-22
2005-10-04
7 Label for WLANID Label/Location Info
Adobe Acrobat PDF (54 kB)
2005-08-22
2005-10-04
7 SAR report annex MiscRF Exposure Info
Adobe Acrobat PDF (37 kB)
2005-07-25
2005-10-04
7 SAR report annex photosRF Exposure Info
Adobe Acrobat PDF (579 kB)
2005-07-25
2005-10-04
7 SAR rport annex diagramRF Exposure Info
Adobe Acrobat PDF (87 kB)
2005-07-25
2005-10-04
7 SAR reportRF Exposure Info
Adobe Acrobat PDF (213 kB)
2005-07-25
2005-10-04
7 cover letterCover Letter(s)
Adobe Acrobat PDF (17 kB)
2005-07-25
2005-10-04
8 Cover letterCover Letter(s)
Adobe Acrobat PDF (56 kB)
2005-07-21
2005-10-04
8 SAR 2 GHz AppCRF Exposure Info
Adobe Acrobat PDF (192 kB)
2005-07-21
2005-10-04
8 SAR 2GHz AppBRF Exposure Info
Adobe Acrobat PDF (579 kB)
2005-07-21
2005-10-04
8 SAR 2GHz AppARF Exposure Info
Adobe Acrobat PDF (57 kB)
2005-07-21
2005-10-04
8 SAR report 2GHzRF Exposure Info
Adobe Acrobat PDF (216 kB)
2005-07-21
2005-10-04
8 SAR report 5GHz AppCRF Exposure Info
Adobe Acrobat PDF (37 kB)
2005-07-21
2005-10-04
8 SAR report 5GHz AppBRF Exposure Info
Adobe Acrobat PDF (579 kB)
2005-07-21
2005-10-04
8 SAR report 5GHz AppARF Exposure Info
Adobe Acrobat PDF (87 kB)
2005-07-21
2005-10-04
8 SAR report 5GHzRF Exposure Info
Adobe Acrobat PDF (213 kB)
2005-07-21
2005-10-04
5 Test SetupTest Setup Photos
Adobe Acrobat PDF (254 kB)
2005-05-24
2005-05-24
5 Internal PhotosInternal Photos
Adobe Acrobat PDF (115 kB)
2005-05-24
2005-05-24
5 Test Report 5 GHzTest Report
Adobe Acrobat PDF (297 kB)
2005-05-24
2005-05-24
5 Cover letterCover Letter(s)
Adobe Acrobat PDF (76 kB)
2005-05-24
2005-05-24
6 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (254 kB)
2005-05-24
2005-05-24
6 Internal PhotosInternal Photos
Adobe Acrobat PDF (115 kB)
2005-05-24
2005-05-24
6 Test Report 2 4 GHzTest Report
Adobe Acrobat PDF (328 kB)
2005-05-24
2005-05-24
6 Test Report 5 8 GHzTest Report
Adobe Acrobat PDF (272 kB)
2005-05-24
2005-05-24
6 Cover letterCover Letter(s)
Adobe Acrobat PDF (76 kB)
2005-05-24
2005-05-24
3 SAR plotRF Exposure Info
Adobe Acrobat PDF (66 kB)
2005-05-18
2005-05-20
3 Declaration worst case SAR platformRF Exposure Info
Adobe Acrobat PDF (63 kB)
2005-05-18
2005-05-20
3 User guide PPTUsers Manual
Adobe Acrobat PDF (2834 kB)
2005-05-18
2005-05-20
3 User guide PP07LUsers Manual
Adobe Acrobat PDF (2341 kB)
2005-05-18
2005-05-20
3 User guide PP05L part 2Users Manual
Adobe Acrobat PDF (1881 kB)
2005-05-18
2005-05-20
3 User guide PP05L part 1Users Manual
Adobe Acrobat PDF (2714 kB)
2005-05-18
2005-05-20
3 User guide PP02X part 2Users Manual
Adobe Acrobat PDF (2580 kB)
2005-05-18
2005-05-20
3 User guide PP02X part 1Users Manual
Adobe Acrobat PDF (1756 kB)
2005-05-18
2005-05-20
3 Updated User guide partable platformUsers Manual
Adobe Acrobat PDF (583 kB)
2005-05-18
2005-05-20
3 Correspondence cover letterCover Letter(s)
Adobe Acrobat PDF (65 kB)
2005-05-18
2005-05-20
4 PP05L user guide part 2Users Manual
Adobe Acrobat PDF (1881 kB)
2005-05-18
2005-05-20
4 PP05L user guide part 1Users Manual
Adobe Acrobat PDF (2714 kB)
2005-05-18
2005-05-20
4 PP02X user guide part 2Users Manual
Adobe Acrobat PDF (2580 kB)
2005-05-18
2005-05-20
4 PP02X user guide part 1Users Manual
Adobe Acrobat PDF (1756 kB)
2005-05-18
2005-05-20
4 SAR plotRF Exposure Info
Adobe Acrobat PDF (66 kB)
2005-05-18
2005-05-20
4 Declaration worst case SAR platformRF Exposure Info
Adobe Acrobat PDF (63 kB)
2005-05-18
2005-05-20
4 user guide PPTUsers Manual
Adobe Acrobat PDF (2834 kB)
2005-05-18
2005-05-20
4 user guide PP07LUsers Manual
Adobe Acrobat PDF (2341 kB)
2005-05-18
2005-05-20
4 Updated portable user guideUsers Manual
Adobe Acrobat PDF (583 kB)
2005-05-18
2005-05-20
4 Correspondence Cover letterCover Letter(s)
Adobe Acrobat PDF (65 kB)
2005-05-18
2005-05-20
3 cover letter 3Cover Letter(s)
Adobe Acrobat PDF (55 kB)
2005-04-12
2005-05-20
3 cover letter 2 - SARRF Exposure Info
Adobe Acrobat PDF (124 kB)
2005-04-12
2005-05-20
3 cover letter 1Cover Letter(s)
Adobe Acrobat PDF (104 kB)
2005-04-12
2005-05-20
4 updated cover letter 3Cover Letter(s)
Adobe Acrobat PDF (55 kB)
2005-04-12
2005-05-20
4 updated cover lettter 2 - SARRF Exposure Info
Adobe Acrobat PDF (124 kB)
2005-04-12
2005-05-20
4 updated cover letter 1 - EMCCover Letter(s)
Adobe Acrobat PDF (104 kB)
2005-04-12
2005-05-20
3 test report original approvalTest Report
Adobe Acrobat PDF (501 kB)
2005-03-30
2005-05-20
3 test report PP07LTest Report
Adobe Acrobat PDF (505 kB)
2005-03-30
2005-05-20
3 liquid confidentaliry requestCover Letter(s)
Adobe Acrobat PDF (56 kB)
2005-03-30
2005-05-20
3 probe calRF Exposure Info
Adobe Acrobat PDF (2896 kB)
2005-03-30
2005-05-20
3 appd cRF Exposure Info
Adobe Acrobat PDF (337 kB)
2005-03-30
2005-05-20
3 appd bRF Exposure Info
Adobe Acrobat PDF (634 kB)
2005-03-30
2005-05-20
3 appd aRF Exposure Info
Adobe Acrobat PDF (136 kB)
2005-03-30
2005-05-20
3 sar reportRF Exposure Info
Adobe Acrobat PDF (496 kB)
2005-03-30
2005-05-20
3 int photos cardInternal Photos
Adobe Acrobat PDF (217 kB)
2005-03-30
2005-05-20
3 ext photos cardExternal Photos
Adobe Acrobat PDF (221 kB)
2005-03-30
2005-05-20
3 user guideUsers Manual
Adobe Acrobat PDF (623 kB)
2005-03-30
2005-05-20
3 confidentiality requestCover Letter(s)
Adobe Acrobat PDF (54 kB)
2005-03-30
2005-05-20
3 Authorization letterAttestation Statements
Adobe Acrobat PDF (72 kB)
2005-03-30
2005-05-20
3 test setup photos PP07LTest Setup Photos
Adobe Acrobat PDF (148 kB)
2005-03-30
2005-05-20
3 ext photos PP07LExternal Photos
Adobe Acrobat PDF (248 kB)
2005-03-30
2005-05-20
3 antenna spec PP07lRF Exposure Info
Adobe Acrobat PDF (414 kB)
2005-03-30
2005-05-20
3 worst case SAR platformRF Exposure Info
Adobe Acrobat PDF (122 kB)
2005-03-30
2005-05-20
3 worst case emission platformCover Letter(s)
Adobe Acrobat PDF (103 kB)
2005-03-30
2005-05-20
4 user guideUsers Manual
Adobe Acrobat PDF (623 kB)
2005-03-30
2005-05-20
4 int photos cardInternal Photos
Adobe Acrobat PDF (217 kB)
2005-03-30
2005-05-20
4 ext photos cardExternal Photos
Adobe Acrobat PDF (221 kB)
2005-03-30
2005-05-20
4 ext photos PP07LExternal Photos
Adobe Acrobat PDF (248 kB)
2005-03-30
2005-05-20
4 test setup photos PP07LTest Setup Photos
Adobe Acrobat PDF (148 kB)
2005-03-30
2005-05-20
4 appd CRF Exposure Info
Adobe Acrobat PDF (374 kB)
2005-03-30
2005-05-20
4 appd BRF Exposure Info
Adobe Acrobat PDF (634 kB)
2005-03-30
2005-05-20
4 appd ARF Exposure Info
Adobe Acrobat PDF (136 kB)
2005-03-30
2005-05-20
4 SAR probe calRF Exposure Info
Adobe Acrobat PDF (2896 kB)
2005-03-30
2005-05-20
4 test report - 2.4ghzRF Exposure Info
Adobe Acrobat PDF (491 kB)
2005-03-30
2005-05-20
4 SAR Liquids Confidentailiry requestCover Letter(s)
Adobe Acrobat PDF (56 kB)
2005-03-30
2005-05-20
4 SAR Probe Cal 5GRF Exposure Info
Adobe Acrobat PDF (2896 kB)
2005-03-30
2005-05-20
4 test report 5G uppder bandRF Exposure Info
Adobe Acrobat PDF (496 kB)
2005-03-30
2005-05-20
4 origianl approval test reportTest Report
Adobe Acrobat PDF (546 kB)
2005-03-30
2005-05-20
4 Antenna specRF Exposure Info
Adobe Acrobat PDF (414 kB)
2005-03-30
2005-05-20
4 C2P chage reportTest Report
Adobe Acrobat PDF (539 kB)
2005-03-30
2005-05-20
4 Confidentiality request letterCover Letter(s)
Adobe Acrobat PDF (54 kB)
2005-03-30
2005-05-20
4 Authorization letterAttestation Statements
Adobe Acrobat PDF (72 kB)
2005-03-30
2005-05-20
4 worst case SAR platform cover letterRF Exposure Info
Adobe Acrobat PDF (122 kB)
2005-03-30
2005-05-20
4 worst case emissions paltform cover letterCover Letter(s)
Adobe Acrobat PDF (103 kB)
2005-03-30
2005-05-20
1 Test ReportTest Report
Adobe Acrobat PDF (408 kB)
2005-03-14
2005-03-08
2 RF Exposure InfoRF Exposure Info
Adobe Acrobat PDF (104 kB)
2005-03-08
2005-03-08
2 Test ReportTest Report
Adobe Acrobat PDF (501 kB)
2005-03-08
2005-03-08
2 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (286 kB)
2005-03-08
2005-03-08
2 Modular Approval RequestCover Letter(s)
Adobe Acrobat PDF (68 kB)
2005-03-08
2005-03-08
2 LabelID Label/Location Info
Adobe Acrobat PDF (596 kB)
2005-03-08
2005-03-08
2 Internal PhotosInternal Photos
Adobe Acrobat PDF (217 kB)
2005-03-08
2005-03-08
2 External PhotosExternal Photos
Adobe Acrobat PDF (221 kB)
2005-03-08
2005-03-08
2 Confidentiality RequestCover Letter(s)
Adobe Acrobat PDF (54 kB)
2005-03-08
2005-03-08
2 Users GuideUsers Manual
Adobe Acrobat PDF (623 kB)
2005-03-08
2005-03-08
1 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (286 kB)
2005-03-08
2005-03-08
1 Modular Approval Request LetterCover Letter(s)
Adobe Acrobat PDF (68 kB)
2005-03-08
2005-03-08
1 LabelID Label/Location Info
Adobe Acrobat PDF (596 kB)
2005-03-08
2005-03-08
1 Internal PhotosInternal Photos
Adobe Acrobat PDF (217 kB)
2005-03-08
2005-03-08
1 External PhotosExternal Photos
Adobe Acrobat PDF (221 kB)
2005-03-08
2005-03-08
1 EMC 2 GHzTest Report
Adobe Acrobat PDF (546 kB)
2005-03-08
2005-03-08
1 Confidentiality RequestCover Letter(s)
Adobe Acrobat PDF (54 kB)
2005-03-08
2005-03-08
1 Users GuideUsers Manual
Adobe Acrobat PDF (623 kB)
2005-03-08
2005-03-08

APP # 13 (2007-06-22)

App # Document Type Submitted
Available
13 Non Occupancy Statement Attestation Statements
Adobe Acrobat PDF (17 kB)
2007-08-20 00:00:00
2007-06-22 00:00:00
13 Regulatory WLAN Antenna Hitachi Operational Description
Adobe Acrobat PDF (453 kB)
2007-06-22 00:00:00
2007-06-22 00:00:00
13 Test Report Test Report
Adobe Acrobat PDF (1021 kB)
2007-06-22 00:00:00
2007-06-22 00:00:00
13 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (810 kB)
2007-06-22 00:00:00
2007-06-22 00:00:00
13 RF Exposure Info MPE RF Exposure Info
Adobe Acrobat PDF (112 kB)
2007-06-22 00:00:00
2007-06-22 00:00:00
13 DFS Report Test Report
Adobe Acrobat PDF (438 kB)
2007-06-22 00:00:00
2007-06-22 00:00:00
13 abg Antenna Specification Operational Description
Adobe Acrobat PDF (86 kB)
2007-06-22 00:00:00
2007-06-22 00:00:00
13 C2PC Request Cover Letter(s)
Adobe Acrobat PDF (23 kB)
2007-06-22 00:00:00
2007-06-22 00:00:00
13 Attestation Statment No Ad hoc mode and DFS Attestation Attestation Statements
Adobe Acrobat PDF (18 kB)
2007-06-22 00:00:00
2007-06-22 00:00:00

APP # 11 (2007-05-02)

App # Document Type Submitted
Available
11 Host Manual 2 Users Manual
Adobe Acrobat PDF (93 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 Host Manual 1 Users Manual
Adobe Acrobat PDF (574 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 External Photos External Photos
Adobe Acrobat PDF (1371 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 Antennan Specification BT Parts List/Tune Up Info
Adobe Acrobat PDF (97 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 Antennan Specification WLAN Parts List/Tune Up Info
Adobe Acrobat PDF (86 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 Antenna Location Photos Parts List/Tune Up Info
Adobe Acrobat PDF (1060 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 RF Exposure Information RF Exposure Info
Adobe Acrobat PDF (66 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 attestation letter Cover Letter(s)
Adobe Acrobat PDF (97 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 Collocation Cover Letter Cover Letter(s)
Adobe Acrobat PDF (93 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 Class II Permissive Change Letter Cover Letter(s)
Adobe Acrobat PDF (23 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
11 Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (54 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00

APP # 12 (2007-05-02)

App # Document Type Submitted
Available
12 Setup Photos Test Setup Photos
Adobe Acrobat PDF (102 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Report Test Report
Adobe Acrobat PDF (438 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 attestation letter Cover Letter(s)
Adobe Acrobat PDF (97 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Host Manual 2 Users Manual
Adobe Acrobat PDF (93 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Host Manual 1 Users Manual
Adobe Acrobat PDF (574 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Antenna Spec for BT Parts List/Tune Up Info
Adobe Acrobat PDF (97 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Antenna Spec for WLAN Parts List/Tune Up Info
Adobe Acrobat PDF (86 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Antenna Location Photos Parts List/Tune Up Info
Adobe Acrobat PDF (1060 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 External Photos External Photos
Adobe Acrobat PDF (1371 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 RF Exposure Information RF Exposure Info
Adobe Acrobat PDF (66 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 TCB Q and A Cover Letter(s)
Adobe Acrobat PDF (12 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Collocation Cover Letter Cover Letter(s)
Adobe Acrobat PDF (93 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Class II Permissive Change Letter Cover Letter(s)
Adobe Acrobat PDF (23 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00
12 Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (54 kB)
2007-05-02 00:00:00
2007-05-02 00:00:00

APP # 10 (2006-01-06)

App # Document Type Submitted
Available
10 rad channel 13 Test Report
Adobe Acrobat PDF (137 kB)
2006-01-10 00:00:00
2006-01-06 00:00:00
10 Test Report Test Report
Adobe Acrobat PDF (440 kB)
2006-01-06 00:00:00
2006-01-06 00:00:00

APP # 9 (2006-01-06)

App # Document Type Submitted
Available
9 Test Report Test Report
Adobe Acrobat PDF (440 kB)
2006-01-06 00:00:00
2006-01-06 00:00:00
9 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (413 kB)
2006-01-06 00:00:00
2006-01-06 00:00:00
9 Photos Internal Photos
Adobe Acrobat PDF (447 kB)
2006-01-06 00:00:00
2006-01-06 00:00:00
9 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (17 kB)
2006-01-06 00:00:00
2006-01-06 00:00:00

APP # 10 (2006-01-06)

App # Document Type Submitted
Available
10 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (413 kB)
2006-01-06 00:00:00
2006-01-06 00:00:00
10 Photos Internal Photos
Adobe Acrobat PDF (447 kB)
2006-01-06 00:00:00
2006-01-06 00:00:00
10 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (17 kB)
2006-01-06 00:00:00
2006-01-06 00:00:00

APP # 8 (2005-10-04)

App # Document Type Submitted
Available
8 Bluetooth label ID Label/Location Info
Adobe Acrobat PDF (341 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00
8 SAR side plot setup photo RF Exposure Info
Adobe Acrobat PDF (79 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00
8 SAR side plot RF Exposure Info
Adobe Acrobat PDF (104 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00
8 users manual Users Manual
Adobe Acrobat PDF (584 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00
8 correspondence letter Attestation Statements
Adobe Acrobat PDF (65 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00

APP # 7 (2005-10-04)

App # Document Type Submitted
Available
7 SAR setup photo RF Exposure Info
Adobe Acrobat PDF (79 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00
7 users manual Users Manual
Adobe Acrobat PDF (820 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00
7 SAR plot RF Exposure Info
Adobe Acrobat PDF (104 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00
7 corespondence letter Attestation Statements
Adobe Acrobat PDF (69 kB)
2005-09-20 00:00:00
2005-10-04 00:00:00
7 Tablet edge at phantom RF Exposure Info
Adobe Acrobat PDF (17 kB)
2005-08-22 00:00:00
2005-10-04 00:00:00
7 Label Bluetooth ID Label/Location Info
Adobe Acrobat PDF (341 kB)
2005-08-22 00:00:00
2005-10-04 00:00:00
7 Label for WLAN ID Label/Location Info
Adobe Acrobat PDF (54 kB)
2005-08-22 00:00:00
2005-10-04 00:00:00
7 SAR report annex Misc RF Exposure Info
Adobe Acrobat PDF (37 kB)
2005-07-25 00:00:00
2005-10-04 00:00:00
7 SAR report annex photos RF Exposure Info
Adobe Acrobat PDF (579 kB)
2005-07-25 00:00:00
2005-10-04 00:00:00
7 SAR rport annex diagram RF Exposure Info
Adobe Acrobat PDF (87 kB)
2005-07-25 00:00:00
2005-10-04 00:00:00
7 SAR report RF Exposure Info
Adobe Acrobat PDF (213 kB)
2005-07-25 00:00:00
2005-10-04 00:00:00
7 cover letter Cover Letter(s)
Adobe Acrobat PDF (17 kB)
2005-07-25 00:00:00
2005-10-04 00:00:00

APP # 8 (2005-10-04)

App # Document Type Submitted
Available
8 Cover letter Cover Letter(s)
Adobe Acrobat PDF (56 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00
8 SAR 2 GHz AppC RF Exposure Info
Adobe Acrobat PDF (192 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00
8 SAR 2GHz AppB RF Exposure Info
Adobe Acrobat PDF (579 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00
8 SAR 2GHz AppA RF Exposure Info
Adobe Acrobat PDF (57 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00
8 SAR report 2GHz RF Exposure Info
Adobe Acrobat PDF (216 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00
8 SAR report 5GHz AppC RF Exposure Info
Adobe Acrobat PDF (37 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00
8 SAR report 5GHz AppB RF Exposure Info
Adobe Acrobat PDF (579 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00
8 SAR report 5GHz AppA RF Exposure Info
Adobe Acrobat PDF (87 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00
8 SAR report 5GHz RF Exposure Info
Adobe Acrobat PDF (213 kB)
2005-07-21 00:00:00
2005-10-04 00:00:00

APP # 5 (2005-05-24)

App # Document Type Submitted
Available
5 Test Setup Test Setup Photos
Adobe Acrobat PDF (254 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00
5 Internal Photos Internal Photos
Adobe Acrobat PDF (115 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00
5 Test Report 5 GHz Test Report
Adobe Acrobat PDF (297 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00
5 Cover letter Cover Letter(s)
Adobe Acrobat PDF (76 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00

APP # 6 (2005-05-24)

App # Document Type Submitted
Available
6 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (254 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00
6 Internal Photos Internal Photos
Adobe Acrobat PDF (115 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00
6 Test Report 2 4 GHz Test Report
Adobe Acrobat PDF (328 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00
6 Test Report 5 8 GHz Test Report
Adobe Acrobat PDF (272 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00
6 Cover letter Cover Letter(s)
Adobe Acrobat PDF (76 kB)
2005-05-24 00:00:00
2005-05-24 00:00:00

APP # 3 (2005-05-20)

App # Document Type Submitted
Available
3 SAR plot RF Exposure Info
Adobe Acrobat PDF (66 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 Declaration worst case SAR platform RF Exposure Info
Adobe Acrobat PDF (63 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 User guide PPT Users Manual
Adobe Acrobat PDF (2834 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 User guide PP07L Users Manual
Adobe Acrobat PDF (2341 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 User guide PP05L part 2 Users Manual
Adobe Acrobat PDF (1881 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 User guide PP05L part 1 Users Manual
Adobe Acrobat PDF (2714 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 User guide PP02X part 2 Users Manual
Adobe Acrobat PDF (2580 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 User guide PP02X part 1 Users Manual
Adobe Acrobat PDF (1756 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 Updated User guide partable platform Users Manual
Adobe Acrobat PDF (583 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
3 Correspondence cover letter Cover Letter(s)
Adobe Acrobat PDF (65 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00

APP # 4 (2005-05-20)

App # Document Type Submitted
Available
4 PP05L user guide part 2 Users Manual
Adobe Acrobat PDF (1881 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 PP05L user guide part 1 Users Manual
Adobe Acrobat PDF (2714 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 PP02X user guide part 2 Users Manual
Adobe Acrobat PDF (2580 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 PP02X user guide part 1 Users Manual
Adobe Acrobat PDF (1756 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 SAR plot RF Exposure Info
Adobe Acrobat PDF (66 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 Declaration worst case SAR platform RF Exposure Info
Adobe Acrobat PDF (63 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 user guide PPT Users Manual
Adobe Acrobat PDF (2834 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 user guide PP07L Users Manual
Adobe Acrobat PDF (2341 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 Updated portable user guide Users Manual
Adobe Acrobat PDF (583 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00
4 Correspondence Cover letter Cover Letter(s)
Adobe Acrobat PDF (65 kB)
2005-05-18 00:00:00
2005-05-20 00:00:00

APP # 3 (2005-05-20)

App # Document Type Submitted
Available
3 cover letter 3 Cover Letter(s)
Adobe Acrobat PDF (55 kB)
2005-04-12 00:00:00
2005-05-20 00:00:00
3 cover letter 2 - SAR RF Exposure Info
Adobe Acrobat PDF (124 kB)
2005-04-12 00:00:00
2005-05-20 00:00:00
3 cover letter 1 Cover Letter(s)
Adobe Acrobat PDF (104 kB)
2005-04-12 00:00:00
2005-05-20 00:00:00

APP # 4 (2005-05-20)

App # Document Type Submitted
Available
4 updated cover letter 3 Cover Letter(s)
Adobe Acrobat PDF (55 kB)
2005-04-12 00:00:00
2005-05-20 00:00:00
4 updated cover lettter 2 - SAR RF Exposure Info
Adobe Acrobat PDF (124 kB)
2005-04-12 00:00:00
2005-05-20 00:00:00
4 updated cover letter 1 - EMC Cover Letter(s)
Adobe Acrobat PDF (104 kB)
2005-04-12 00:00:00
2005-05-20 00:00:00

APP # 3 (2005-05-20)

App # Document Type Submitted
Available
3 test report original approval Test Report
Adobe Acrobat PDF (501 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 test report PP07L Test Report
Adobe Acrobat PDF (505 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 liquid confidentaliry request Cover Letter(s)
Adobe Acrobat PDF (56 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 probe cal RF Exposure Info
Adobe Acrobat PDF (2896 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 appd c RF Exposure Info
Adobe Acrobat PDF (337 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 appd b RF Exposure Info
Adobe Acrobat PDF (634 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 appd a RF Exposure Info
Adobe Acrobat PDF (136 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 sar report RF Exposure Info
Adobe Acrobat PDF (496 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 int photos card Internal Photos
Adobe Acrobat PDF (217 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 ext photos card External Photos
Adobe Acrobat PDF (221 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 user guide Users Manual
Adobe Acrobat PDF (623 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 confidentiality request Cover Letter(s)
Adobe Acrobat PDF (54 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 Authorization letter Attestation Statements
Adobe Acrobat PDF (72 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 test setup photos PP07L Test Setup Photos
Adobe Acrobat PDF (148 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 ext photos PP07L External Photos
Adobe Acrobat PDF (248 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 antenna spec PP07l RF Exposure Info
Adobe Acrobat PDF (414 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 worst case SAR platform RF Exposure Info
Adobe Acrobat PDF (122 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
3 worst case emission platform Cover Letter(s)
Adobe Acrobat PDF (103 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00

APP # 4 (2005-05-20)

App # Document Type Submitted
Available
4 user guide Users Manual
Adobe Acrobat PDF (623 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 int photos card Internal Photos
Adobe Acrobat PDF (217 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 ext photos card External Photos
Adobe Acrobat PDF (221 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 ext photos PP07L External Photos
Adobe Acrobat PDF (248 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 test setup photos PP07L Test Setup Photos
Adobe Acrobat PDF (148 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 appd C RF Exposure Info
Adobe Acrobat PDF (374 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 appd B RF Exposure Info
Adobe Acrobat PDF (634 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 appd A RF Exposure Info
Adobe Acrobat PDF (136 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 SAR probe cal RF Exposure Info
Adobe Acrobat PDF (2896 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 test report - 2.4ghz RF Exposure Info
Adobe Acrobat PDF (491 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 SAR Liquids Confidentailiry request Cover Letter(s)
Adobe Acrobat PDF (56 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 SAR Probe Cal 5G RF Exposure Info
Adobe Acrobat PDF (2896 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 test report 5G uppder band RF Exposure Info
Adobe Acrobat PDF (496 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 origianl approval test report Test Report
Adobe Acrobat PDF (546 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 Antenna spec RF Exposure Info
Adobe Acrobat PDF (414 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 C2P chage report Test Report
Adobe Acrobat PDF (539 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 Confidentiality request letter Cover Letter(s)
Adobe Acrobat PDF (54 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 Authorization letter Attestation Statements
Adobe Acrobat PDF (72 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 worst case SAR platform cover letter RF Exposure Info
Adobe Acrobat PDF (122 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00
4 worst case emissions paltform cover letter Cover Letter(s)
Adobe Acrobat PDF (103 kB)
2005-03-30 00:00:00
2005-05-20 00:00:00

APP # 1 (2005-03-08)

App # Document Type Submitted
Available
1 Test Report Test Report
Adobe Acrobat PDF (408 kB)
2005-03-14 00:00:00
2005-03-08 00:00:00

APP # 2 (2005-03-08)

App # Document Type Submitted
Available
2 RF Exposure Info RF Exposure Info
Adobe Acrobat PDF (104 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
2 Test Report Test Report
Adobe Acrobat PDF (501 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
2 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (286 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
2 Modular Approval Request Cover Letter(s)
Adobe Acrobat PDF (68 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
2 Label ID Label/Location Info
Adobe Acrobat PDF (596 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
2 Internal Photos Internal Photos
Adobe Acrobat PDF (217 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
2 External Photos External Photos
Adobe Acrobat PDF (221 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
2 Confidentiality Request Cover Letter(s)
Adobe Acrobat PDF (54 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
2 Users Guide Users Manual
Adobe Acrobat PDF (623 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00

APP # 1 (2005-03-08)

App # Document Type Submitted
Available
1 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (286 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
1 Modular Approval Request Letter Cover Letter(s)
Adobe Acrobat PDF (68 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
1 Label ID Label/Location Info
Adobe Acrobat PDF (596 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
1 Internal Photos Internal Photos
Adobe Acrobat PDF (217 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
1 External Photos External Photos
Adobe Acrobat PDF (221 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
1 EMC 2 GHz Test Report
Adobe Acrobat PDF (546 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
1 Confidentiality Request Cover Letter(s)
Adobe Acrobat PDF (54 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00
1 Users Guide Users Manual
Adobe Acrobat PDF (623 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00

APP # 4 (2005-05-20)

App # Document Type Submitted
Available
4 OPERATIONAL DESCRIPTION Operational Description
Adobe Acrobat PDF (89 kB)
2005-03-30 00:00:00
N/A

APP # 1 (2005-03-08)

App # Document Type Submitted
Available
1 Operational Description Operational Description
Adobe Acrobat PDF (89 kB)
2005-03-08 00:00:00
N/A

APP # 3 (2005-05-20)

App # Document Type Submitted
Available
3 Users Manual BOM Parts List/Tune Up Info
Adobe Acrobat PDF (50 kB)
2005-03-30 00:00:00
N/A

APP # 1 (2005-03-08)

App # Document Type Submitted
Available
1 EMC 5 GHz Test Report
Adobe Acrobat PDF (408 kB)
2005-03-08 00:00:00
2005-03-08 00:00:00

APP # 2 (2005-03-08)

App # Document Type Submitted
Available
2 Block Diagram Block Diagram
Adobe Acrobat PDF (48 kB)
2005-03-08 00:00:00
N/A

APP # 3 (2005-05-20)

App # Document Type Submitted
Available
3 Operational descripiton Operational Description
Adobe Acrobat PDF (89 kB)
2005-03-30 00:00:00
N/A

APP # 4 (2005-05-20)

App # Document Type Submitted
Available
4 SAR Liquids Operational Description
Adobe Acrobat PDF (57 kB)
2005-03-30 00:00:00
N/A

APP # 1 (2005-03-08)

App # Document Type Submitted
Available
1 Block Diagram Block Diagram
Adobe Acrobat PDF (48 kB)
2005-03-08 00:00:00
N/A

APP # 3 (2005-05-20)

App # Document Type Submitted
Available
3 sar liquids Operational Description
Adobe Acrobat PDF (57 kB)
2005-03-30 00:00:00
N/A

APP # 4 (2005-05-20)

App # Document Type Submitted
Available
4 Users Manual BOM Parts List/Tune Up Info
Adobe Acrobat PDF (50 kB)
2005-03-30 00:00:00
N/A

APP # 1 (2005-03-08)

App # Document Type Submitted
Available
1 Schematics Schematics
Adobe Acrobat PDF (786 kB)
2005-03-08 00:00:00
N/A

APP # 3 (2005-05-20)

App # Document Type Submitted
Available
3 Block diagram Block Diagram
Adobe Acrobat PDF (48 kB)
2005-03-30 00:00:00
N/A

APP # 2 (2005-03-08)

App # Document Type Submitted
Available
2 Operational Description Operational Description
Adobe Acrobat PDF (89 kB)
2005-03-08 00:00:00
N/A
2 Schematics Schematics
Adobe Acrobat PDF (786 kB)
2005-03-08 00:00:00
N/A

APP # 4 (2005-05-20)

App # Document Type Submitted
Available
4 BLOCK DIAGRAM Block Diagram
Adobe Acrobat PDF (48 kB)
2005-03-30 00:00:00
N/A

Correspondence

All Correspondence

App # Document Date
7 Incoming Correspondence generated [Sep 20 2005]
7 Incoming Correspondence generated [Aug 22 2005]
7 Incoming Correspondence generated [Sep 20 2005]
7 Incoming Correspondence generated [Aug 22 2005]
7 Incoming Correspondence generated [Sep 20 2005]
7 Incoming Correspondence generated [Aug 22 2005]
7 [Re-Sent]E-Mail generated [Aug 3 2005]
7 Incoming Correspondence generated [Oct 4 2005]
7 Incoming Correspondence generated [Aug 22 2005]
7 [Re-Sent]E-Mail generated [Aug 3 2005]
7 [Re-Sent]E-Mail generated [Aug 25 2005]
7 [Re-Sent]E-Mail generated [Aug 12 2005]
7 Incoming Correspondence generated [Sep 20 2005]
7 Incoming Correspondence generated [Aug 17 2005]
5 [Re-Sent]RT Email Correspondence generated [Aug 26 2005]
5    Incoming Correspondence generated [Sep 6 2005]
6 [Re-Sent]RT Email Correspondence generated [Aug 26 2005]
6    Incoming Correspondence generated [Sep 6 2005]
3 Incoming Correspondence generated [May 18 2005]
3 Incoming Correspondence generated [May 18 2005]
3 Incoming Correspondence generated [May 18 2005]
3 Incoming Correspondence generated [May 18 2005]
3 [Re-Sent]E-Mail generated [Apr 11 2005]
3 Incoming Correspondence generated [May 18 2005]
3 Incoming Correspondence generated [May 18 2005]
3 Incoming Correspondence generated [Apr 18 2005]
3 [Re-Sent]Confidential letter to applicant generated [May 20 2005]
3 Incoming Correspondence generated [May 18 2005]
3 [Re-Sent]E-Mail generated [May 11 2005]
3 Incoming Correspondence generated [May 18 2005]
3 [Re-Sent]E-Mail generated [May 11 2005]
3 Incoming Correspondence generated [May 18 2005]
3 Incoming Correspondence generated [May 18 2005]
13 [Re-Sent]RT Email Correspondence generated [Aug 3 2007]
13    Incoming Correspondence generated [Aug 20 2007]
13    Incoming Correspondence generated [Aug 20 2007]
8 Incoming Correspondence generated [Sep 20 2005]
8 [Re-Sent]E-Mail generated [Jul 26 2005]
8    Incoming Correspondence generated [Sep 20 2005]
8 [Re-Sent]E-Mail generated [Jul 26 2005]
8 Incoming Correspondence generated [Aug 17 2005]
8 Incoming Correspondence generated [Sep 20 2005]
8 Incoming Correspondence generated [Sep 20 2005]
8 Incoming Correspondence generated [Sep 20 2005]
4 Incoming Correspondence generated [May 18 2005]
4 Incoming Correspondence generated [May 18 2005]
4 Incoming Correspondence generated [May 18 2005]
4 Incoming Correspondence generated [May 18 2005]
4 Incoming Correspondence generated [May 18 2005]
4 [Re-Sent]E-Mail generated [Apr 11 2005]
4 Incoming Correspondence generated [May 18 2005]
4 Incoming Correspondence generated [May 18 2005]
4 Incoming Correspondence generated [Apr 18 2005]
4 Incoming Correspondence generated [May 18 2005]
4 Incoming Correspondence generated [May 18 2005]
4 [Re-Sent]E-Mail generated [May 11 2005]
4 Incoming Correspondence generated [May 18 2005]
4 [Re-Sent]E-Mail generated [May 11 2005]
4 Incoming Correspondence generated [May 18 2005]

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0006267116
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: /W/zJxch0rdhmwuJLQZrEQ==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: gerald.schmidt@ict.cetecom.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval (LMA) Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0006267116
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: iSSCo1nUGryH4Ys8zsPcIA==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: gerald.schmidt@ict.cetecom.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval (LMA) Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: PWhzG7N3Ih3b34DJ5lw02g==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

Alternative Applicant Contact

Firm Name: Cetecom Inc.
Name: Harpreet Sidhu
Applicant Title: EMC & Radio Engineer
Line one: 411 Dixon landing rd
City: Milpitas
State: California
Country: United States
Zip Code: 95035

TCB Information

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com

Technical Contact
Firm Name:
Cetecom Inc.
First Name: Harpreet
Middle Name: S
Last Name: Sidhu
Line 1:
411 Dixon Landing Rd
City: Milpitas
State: California
Country:
United States
Zip Code: 95035
Telephone Number:
4085866210

Extension:
E-Mail:

Non Technical Contact
Firm Name: Cetecom Inc
First Name: Harpreet
Middle Name: s
Last Name: sidhu
Line 1: 411 Dixon Landing Rd
City: Milpitas
State: California
Country: United States
Zip Code: 95035
Telephone Number: 4085866210 Extension:
E-Mail: harpreet.sidhu@cetecomusa.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN mini PCI card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Harpreet Sidhu
Title of authorized signature:  EMC & Radio Engineer

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: xZioggkj4K8NPN05DK/6/g==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

Alternative Applicant Contact

Firm Name: Cetecom Inc.
Name: Harpreet Sidhu
Applicant Title: EMC & Radio Engineer
Line one: 411 Dixon landing rd
City: Milpitas
State: California
Country: United States
Zip Code: 95035

TCB Information

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com

Technical Contact
Firm Name:
Cetecom Inc.
First Name: Harpreet
Middle Name: S
Last Name: Sidhu
Line 1:
411 Dixon Landing Rd
City: Milpitas
State: California
Country:
United States
Zip Code: 95035
Telephone Number:
4085866210

Extension:
E-Mail:

Non Technical Contact
Firm Name: Cetecom Inc
First Name: Harpreet
Middle Name: S
Last Name: sidhu
Line 1: 411 Dixon Landing Rd
City: Milpitas
State: California
Country: United States
Zip Code: 95035
Telephone Number: 4085866210 Extension:
E-Mail: harpreet.sidhu@cetecomusa.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN mini PCI card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Harpreet Sidhu
Title of authorized signature:  EMC & Radio Engineer

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: im/k+bUfPXaNcJrUm0xlKQ==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: Gerald.Schmidt@ict.cetecom.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to allow an alternate PA. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature: 

Complete items below if agent signs the application:

Firm Name:  CETECOM Inc.
Name:  Lothar Lothar Lothar
Line 1:  Lothar
Line 2:  Lothar
P.O. Box:  Lothar
City:  Lothar
State:  Lothar
Country:  Lothar
Zip Code:  Lothar
Telephone Number:  +1 408 586 6214
Fax Number:  +1 408 586 6299
E-mail:  Lothar.Schmidt@cetecomusa.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: k9vUISOCHvcmQ2UkSSTIKA==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: gerald.schmidt@ict.cetecom.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to allow an alternate PA. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature: 

Complete items below if agent signs the application:

Firm Name:  CETECOM Inc.
Name:  Lothar Lothar Lothar
Line 1:  Lothar
Line 2:  Lothar
P.O. Box:  Lothar
City:  Lothar
State:  Lothar
Country:  Lothar
Zip Code:  Lothar
Telephone Number:  +1 408 586 6214
Fax Number:  +1 408 586 6299
E-mail:  Lothar.Schmidt@cetecomusa

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: fw3Jmlt/CdeMLQ3R8TL6Gg==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

Alternative Applicant Contact

Firm Name: CETECOM Inc.
Name: Lothar Schmidt
Applicant Title: Technical Manager
Line one: 411 Dixon Landing Road
City: M
State: California
Country: United States
Zip Code: 95035

TCB Information

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com

Technical Contact
Firm Name:
CETECOM Inc.
First Name: Lothar
Last Name: Schmidt
Line 1:
411 Dixon Landing Road
City: Milpitas
State: California
Country:
United States
Zip Code: 95035
Telephone Number:
408 586 6214

Extension:
Fax Number: 408 586 6299
E-Mail:

Non Technical Contact
Firm Name: CETECOM Inc.
First Name: Lothar
Last Name: Schmidt
Line 1: 411 Dixon Landing Road
City: Milpitas
State: California
Country: United States
Zip Code: 95035
Telephone Number: 408 586 6214 Extension:
Fax Number: 408 586 6299
E-Mail: Lothar.Schmidt@cetecomusa.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN mini PCI card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature:  Technical Manager

Complete items below if agent signs the application:

Firm Name:  CETECOM Inc.
Name:  Lothar Lothar Lothar
Line 1:  Lothar
Line 2:  Lothar
P.O. Box:  Lothar
City:  Lothar
State:  Lothar
Country:  Lothar
Zip Code:  Lothar
Telephone Number:  408 586 6214
Fax Number:  408 586 6299
E-mail:  Lothar.Schmidt@cetecomusa.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: x0AGQrLjWa0NYU1ah5VqLQ==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

Alternative Applicant Contact

Firm Name: CETECOM Inc.
Name: Lothar Schmidt
Applicant Title: Technical Manager
Line one: 411 Dixon Landing Road
City: Milpitas
State: California
Country: United States
Zip Code: 95035

TCB Information

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com

Technical Contact
Firm Name:
CETECOM Inc.
First Name: Lothar
Last Name: Schmidt
Line 1:
411 Dixon Landing Road
City: Milpitas
State: California
Country:
United States
Zip Code: 95035
Telephone Number:
408 586 6214

Extension:
Fax Number: 408 586 6299
E-Mail:

Non Technical Contact
Firm Name: CETECOM Inc.
First Name: Lothar
Last Name: Schmidt
Line 1: 411 Dixon Landing Road
City: Milpitas
State: California
Country: United States
Zip Code: 95035
Telephone Number: 408 586 6214 Extension:
Fax Number: 408 586 6299
E-Mail: Lothar.Schmidt@cetecomusa.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN mini PCI card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to allow an alternate PA is in filing(s) under this FCC ID. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature:  Technical Manager

Complete items below if agent signs the application:

Firm Name:  CETECOM Inc.
Name:  Lothar Lothar Lothar
Line 1:  Lothar
Line 2:  Lothar
P.O. Box:  Lothar
City:  Lothar
State:  Lothar
Country:  Lothar
Zip Code:  Lothar
Telephone Number:  408 586 6214
Fax Number:  408 586 6299
E-mail:  Lothar.Schmidt@cetecomusa.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: giWZA6tGuVrCBnu+bNJzZQ==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: gerald.schmidt@ict.cetecom.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN mini PCI card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to allow an alternate antenna for mobile configurations. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: KKbozHPZEuVpmBQG2aVVyg==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: gerald-schmidt@ict.cetecom.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN mini PCI card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Cetecom Inc.
First Name:   Lothar
Last Name:   Schmidt
Telephone Number: 408-586-6200 Extension:
Fax Number:  510-252-0559
E-mail:  lothar.schmidt@cetecomusa.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to allow an alternate antenna for mobile configurations. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: jsmueBsNcYrIYlKld5Btxw==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: mike.kuo@ccsemc.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN Mini PCI Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Compliance Certification Services
First Name:   Thu
Last Name:   Chan
Telephone Number: 510-771-1122 Extension:
Fax Number:  510-661-0888
E-mail:  thu.chan@ccsemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change filing. Limited Modular Approval (LMA). Power output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in this filing. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in filings under this FCC ID. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Thu Chan
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: UMXBvABrCOyALBm5kN5Uug==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: mike.kuo@ccsemc.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN Mini PCI Card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Compliance Certification Services
First Name:   Thu
Last Name:   Chan
Telephone Number: 510-771-1122 Extension:
Fax Number:  510-661-0888
E-mail:  thu.chan@ccsemc.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change filing. Limited Modular Approval (LMA). Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client Device without Radar Detection. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in this filing. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in filings under this FCC ID. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Thu Chan
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Broadcom Corporation
FCC Registration Number (FRN): 0007091952
Alphanumeric FCC ID: QDSBRCM1017
Unique Application Identifier: t1afO3GFxjDSJtOaryiFGg==
Line one: 190 Mathilda Place
City: Sunnyvale
State: California
Country: United States
Zip Code: 94086

TCB Information
TCB Application Email Address: Joachim.Seewald@ict.cetecom.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QDS
Product Code: -BRCM1017

Person at the applicant's address to receive grant or for contact
Name: Daniel Lawless
Title: Director of Engineering, System Operations
Telephone Number: 408-543-3300 Extension:
Fax Number: 408-543-3377
Email: ComplianceEngineering-list-CA-list@broadcom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Broadcom 802.11ag WLAN mini PCI card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CETECOM Inc.
First Name:   Franz
Last Name:   Engert
Telephone Number: 408-586-6249 Extension:
Fax Number:  408-586-6299
E-mail:  franz.engert@cetecom.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change filing to allow operation in 5470 - 5725 MHz band. Limited Modular Approval (LMA). Power output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Except for 5470 - 5725 MHz band operation, the device may be collocated with another mobile configuration as described in former filings. Except for 5470 - 5725 MHz band operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lap held and near-body configurations as shown in former filings under this FCC ID. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Lothar Schmidt
Title of authorized signature:  Director Regulatory and Antenna Services

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 03/08/2005

Application Dated: 03/08/2005
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.082  
CC 15C 5745.0  -  5825.0 0.026  

Limited Modular Approval (LMA) Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
>
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States
  Date of Grant: 10/04/2005

Application Dated: 07/25/2005
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.019  
15E 5260.0  -  5320.0 0.027  

Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.



Mail To:
Lothar Schmidt, Technical Manager
CETECOM Inc.
411 Dixon Landing Road
M, CA 95035


EA934366
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 01/06/2006

Application Dated: 01/06/2006
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.019  
15E 5260.0  -  5320.0 0.027  

Class II Permissive Change to allow an alternate antenna for mobile configurations. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/06/2006

Application Dated: 01/06/2006
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.019  
15E 5260.0  -  5320.0 0.027  

Class II Permissive Change to allow an alternate antenna for mobile configurations. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.



Mail To:


EA820510
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 05/24/2005

Application Dated: 05/24/2005
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.019  
CC 15E 5260.0  -  5320.0 0.027  

Class II Permissive Change to allow an alternate PA. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 05/24/2005

Application Dated: 05/24/2005
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.019  
CC 15E 5260.0  -  5320.0 0.027  

Class II Permissive Change to allow an alternate PA. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA950428
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 03/08/2005

Application Dated: 03/08/2005
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.019  
CC 15E 5260.0  -  5320.0 0.027  

Limited Modular Approval (LMA) Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period.

CC: This device is certified pursuant to two different Part 15 rules sections.
>
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/02/2007

Application Dated: 05/02/2007
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: Broadcom 802.11ag WLAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.082  
CC 15C 5745.0  -  5825.0 0.026  

Class II Permissive Change filing. Limited Modular Approval (LMA). Power output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in this filing. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in filings under this FCC ID. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
>
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 05/24/2005

Application Dated: 05/24/2005
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.082  
CC 15C 5745.0  -  5825.0 0.026  

Class II Permissive Change to allow an alternate PA. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 05/24/2005

Application Dated: 05/24/2005
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 2.4 GHz / 5 GHz 802.11a/b/g WLAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.082  
CC 15C 5745.0  -  5825.0 0.026  

Class II Permissive Change to allow an alternate PA. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA688452
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 01/06/2006

Application Dated: 01/06/2006
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2472.0 0.082  
15C 5745.0  -  5825.0 0.026  

Class II Permissive Change to allow an alternate antenna for mobile configurations. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/06/2006

Application Dated: 01/06/2006
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2472.0 0.082  
15C 5745.0  -  5825.0 0.026  

Class II Permissive Change to allow an alternate antenna for mobile configurations. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.



Mail To:


EA592276
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States
  Date of Grant: 05/20/2005

Application Dated: 03/29/2005
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.019  
CC 15E 5260.0  -  5320.0 0.027  

Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:
Harpreet Sidhu, EMC & Radio Engineer
Cetecom Inc.
411 Dixon landing rd
Milpitas, CA 95035


EA996570
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 06/22/2007

Application Dated: 06/22/2007
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.019  
CC ND 15E 5260.0  -  5320.0 0.027  
CC ND 15E 5500.0  -  5700.0 0.228  

Class II Permissive Change filing to allow operation in 5470 - 5725 MHz band. Limited Modular Approval (LMA). Power output listed is conducted.

Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device.

For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Except for 5470 - 5725 MHz band operation, the device may be collocated with another mobile configuration as described in former filings. Except for 5470 - 5725 MHz band operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lap held and near-body configurations as shown in former filings under this FCC ID.

The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
>
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/02/2007

Application Dated: 05/02/2007
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Broadcom 802.11ag WLAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5180.0  -  5240.0 0.019  
CC ND 15E 5260.0  -  5320.0 0.027  

Class II Permissive Change filing. Limited Modular Approval (LMA). Power output listed is conducted. This device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) as a Client Device without Radar Detection. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than described in this filing. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in filings under this FCC ID. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
>
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States
  Date of Grant: 10/04/2005

Application Dated: 07/21/2005
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2472.0 0.082  
15C 5745.0  -  5825.0 0.026  

Class II Permissive Change to allow an alternate PA is in filing(s) under this FCC ID. Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.



Mail To:
Lothar Schmidt, Technical Manager
CETECOM Inc.
411 Dixon Landing Road
Milpitas, CA 95035


EA542698
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States
  Date of Grant: 05/20/2005

Application Dated: 03/29/2005
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1017
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: Broadcom 802.11ag WLAN mini PCI card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.082  
CC 15C 5745.0  -  5825.0 0.026  

Limited Modular Approval (LMA). Power output listed is conducted. Operations of this composite device in the 5.25-5.35 GHz band are subject to Section 15.37(l) and FCC 05-43A1 transition period. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that end-users have no user-manual instructions to remove or install the device. For operation in mobile RF exposure conditions, the antenna(s) used for transmitters approved in filings under this FCC ID must be installed to provide separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) for lapheld and near-body configurations as shown in this filing. The highest reported body SAR values for this composite device are: 2.4 GHz-band 1.01 W/kg; 5.2 GHz-band 1.41 W/kg; 5.8 GHz-band 1.51 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:
Harpreet Sidhu, EMC & Radio Engineer
Cetecom Inc.
411 Dixon landing rd
Milpitas, CA 95035


EA510655

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details