FCC ID QDS-BRCM1055

802.11agn WLAN + Bluetooth PCIE Minicard

by Broadcom Corporation

Grantee Code: QDS   Product Code: BRCM1055
Latest application date: 2016-02-19

Device Images

FCC ID Device Details

FCC IDQDS-BRCM1055
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQDS
Product CodeBRCM1055
Applicant BusinessBroadcom Corporation 🇺🇸
Related Domains broadcom.com
Equipment Class802.11agn WLAN + Bluetooth PCIE Minicard
Test FirmUL Verification Services Inc. (formerly UL CCS)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-02-19
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2013-01-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2013-01-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2012-03-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2012-03-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2012-03-02
2412-2462 MHzOriginal Equipment2011-01-22
5180-5240 MHzOriginal Equipment2011-01-22
2402-2480 MHzOriginal Equipment2011-01-22

Exhibits

DocumentTypeAvailableFile
A1278 UGUsers Manual2013-06-19PDF 3.4 MB
A1286UGUsers Manual2013-06-19PDF 3.3 MB
A1297UGUsers Manual2013-06-19PDF 3.3 MB
Users Manual-1Users Manual2011-07-10PDF 664.8 KB
Users Manual-2Users Manual2011-07-10PDF 250.7 KB
Internal PhotosInternal Photos2011-07-10PDF 313.2 KB
External PhotosExternal Photos2011-07-10PDF 375 KB
A1278 labelID Label/Location Info2013-01-17PDF 44.6 KB
A1286 labelID Label/Location Info2013-01-17PDF 41.4 KB
A1297 labelID Label/Location Info2013-01-17PDF 42.5 KB
Label_Label LocationID Label/Location Info2011-01-22PDF 79.1 KB
Label_Label locationID Label/Location Info2011-01-22PDF 79.1 KB
Test setup photosTest Setup Photos2016-02-19PDF 496.6 KB
13 inch SAR report photos onlyTest Setup Photos2013-06-19PDF 513.1 KB
13 inch SAR report test setup and antenna locationsTest Setup Photos2013-06-19PDF 513.1 KB
15 in SAR report photos and antenna locationsTest Setup Photos2013-06-19PDF 571 KB
15 inch SAR report test setup and antenna locationsTest Setup Photos2013-06-19PDF 571 KB
17 inch SAR report photos and atenna locationsTest Setup Photos2013-06-19PDF 525.8 KB
17 inch SAR report test setup and antenna locationsTest Setup Photos2013-06-19PDF 525.8 KB
Photos Test SetupTest Setup Photos2012-03-02PDF 185.4 KB
Photos Test SetupTest Setup Photos2012-03-02PDF 62 KB
Photos Test Setup BT LETest Setup Photos2012-03-02PDF 279.6 KB
Photos Test Setup WLANTest Setup Photos2012-03-02PDF 61.9 KB
Test Setup PhotosTest Setup Photos2011-07-10PDF 202.7 KB
Test Setup PhotosTest Setup Photos2011-07-10PDF 272.7 KB
Test Setup PhotosTest Setup Photos2011-07-10PDF 306.8 KB
Test Setup PhotosTest Setup Photos2011-07-10PDF 349.2 KB
Test reportTest Report2016-02-19PDF 3.4 MB
Test Report BT LETest Report2012-03-02PDF 495.9 KB
Test Report WLANTest Report2012-03-02PDF 465.3 KB
Test reportTest Report2012-03-02PDF 1.5 MB
Test reportTest Report2012-03-02PDF 141 KB
Test ReportTest Report2011-01-22PDF 2.4 MB
Test ReportTest Report2011-01-22PDF 1.2 MB
Test ReportTest Report2011-01-22PDF 131.1 KB
Test Report-1Test Report2011-01-22PDF 2.3 MB
Test Report-2Test Report2011-01-22PDF 2.2 MB
Test Report-3Test Report2011-01-22PDF 3.1 MB
BCM94331PCIEBT4 Host AttestationAttestation Statements2016-02-19PDF 246.7 KB
Attestation of Ad-HocAttestation Statements2011-01-22PDF 178 KB
attestation letterAttestation Statements2011-01-22PDF 22.4 KB
Agent authorizationCover Letter(s)2016-02-19PDF 537.4 KB
C2PC LetterCover Letter(s)2016-02-19PDF 200.3 KB
Request for confidentialCover Letter(s)2016-02-19PDF 259 KB
PC2 request letterCover Letter(s)2013-01-17PDF 23.9 KB
SAR limits declarationRF Exposure Info2013-01-17PDF 25.3 KB
SAR limits declaration letterRF Exposure Info2013-01-17PDF 25.3 KB
authorization letterCover Letter(s)2013-01-17PDF 115.5 KB
confidentiality requestCover Letter(s)2013-01-17PDF 37.2 KB
Agent LtrCover Letter(s)2012-03-02PDF 95.9 KB
C2PC LtrCover Letter(s)2012-03-02PDF 31.8 KB
Conf LtrCover Letter(s)2012-03-02PDF 31.4 KB
Agent Authorization-1Cover Letter(s)2011-01-22PDF 115.5 KB
Agent Authorization-2Cover Letter(s)2011-01-22PDF 95.9 KB
Modular Approval Request LetterCover Letter(s)2011-01-22PDF 25.8 KB
Request for ConfidentialityCover Letter(s)2011-01-22PDF 278.8 KB
SAR Report 13 Inch rev CRF Exposure Info2013-01-17PDF 2.1 MB
SAR Report 15 Inch rev CRF Exposure Info2013-01-17PDF 1.9 MB
SAR Report 17 Inch rev CRF Exposure Info2013-01-17PDF 2 MB
SAR test plot Wifi 5GHz 13 inchRF Exposure Info2013-01-17PDF 2.6 MB
SAR test plots 13 inch 2.4GHzRF Exposure Info2013-01-17PDF 980.7 KB
SAR test plots Wifi 2.4GHz 13 inchRF Exposure Info2013-01-17PDF 980.7 KB
SAR test plots Wifi 2.4GHz 15 inhRF Exposure Info2013-01-17PDF 666.4 KB
SAR test plots Wifi 5GHz 15 inchRF Exposure Info2013-01-17PDF 2.5 MB
SAR test plots Wifi 5GHz 17 inchRF Exposure Info2013-01-17PDF 2.4 MB
SAR test plots wifi 2.4 GHz 17 inchRF Exposure Info2013-01-17PDF 952.6 KB
System check plots 17 inchRF Exposure Info2013-01-17PDF 374.8 KB
System check plots 17 inch 2.4 GHzRF Exposure Info2013-01-17PDF 374.8 KB
System performance check plots 13 inchRF Exposure Info2013-01-17PDF 449.6 KB
System performance check plots 13 inch 5GHzRF Exposure Info2013-01-17PDF 2.6 MB
System performance check plots 15 inch 2.4 GHzRF Exposure Info2013-01-17PDF 404.2 KB
System performance check plots 17 inch 2.4GHzRF Exposure Info2013-01-17PDF 952.6 KB
Systm performance check plots 15 inchRF Exposure Info2013-01-17PDF 404.2 KB
cal certificate D2450V2RF Exposure Info2013-01-17PDF 632.5 KB
cal certificate D5GHz V2RF Exposure Info2013-01-17PDF 1.1 MB
cal certificate e field probeRF Exposure Info2013-01-17PDF 1.2 MB
system performance check plots 15 inch 5GHzRF Exposure Info2013-01-17PDF 2.5 MB
system performance check plots 17 inch 5GHzRF Exposure Info2013-01-17PDF 2.4 MB
MPERF Exposure Info2011-01-22PDF 126.2 KB
MPERF Exposure Info2011-01-22PDF 54.4 KB
MPERF Exposure Info2011-01-22PDF 123.5 KB
KDB 594280 D02 v01r03 U-NII Device SW Security Statement (BRCM) Metadata onlyOperational DescriptionPDF 76.3 KB
Operational description Metadata onlyOperational DescriptionPDF 119.1 KB

Application Information

Application IDlbLRs8OvBUn8jpH7UV+HUQ==
Final Action Date2016-02-19
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007091952
ModelBRCM1055
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11agn WLAN + Bluetooth PCIE Minicard
Responsible PartyAnne Liang, Manager, Compliance Engineering, aliang@broadcom.com , 4089225890
Test FirmJay Kogoma, UL Verification Services Inc. (formerly UL CCS), jay.kogoma@ul.com , 510-319-4135
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change to show compliance with new UNII rules for the host model A1278 granted in 01/17/2013 . Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. For Mobileonly configurations, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators must be provided with antenna installation instructions. OEM integrators and End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is: 1.11 W/kg.

Applications

Application IDDatePurpose
lbLRs8OvBUn8jpH7UV+HUQ==2016-02-19Class II permissive change or modification of presently authorized equipment
u4S2jegAevxA3b+FmdrJ0Q==2013-01-17Class II permissive change or modification of presently authorized equipment
TnEZtEPw59I7o+0ORiz8fQ==2013-01-17Class II permissive change or modification of presently authorized equipment
xTLAU5eWqct+9tZ0JXyV2g==2012-03-02Class II permissive change or modification of presently authorized equipment
TynVmcdSDPS7in9a3HfpGg==2012-03-02Class II permissive change or modification of presently authorized equipment
Bh0/ioMBWaKjUTJsggGvxQ==2012-03-02Class II permissive change or modification of presently authorized equipment
gRN/mm9IAHLp2NqHe1fZRw==2011-01-22Original Equipment
QXJa6KV+mHIomDx2DR4XLg==2011-01-22Original Equipment
GOn2+p9sF0vqlIS/dd3DjA==2011-01-22Original Equipment
89mrELs4/74nEhG2h9fa/w==2011-01-22Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.001100015CCC
2402-2480 MHz0.000870015CCC
2402-2480 MHz0.0008715CCC
2412-2462 MHz0.60115CCC
2412-2462 MHz0.40415CCC, MO
5180-5240 MHz0.03215E38, CC, MO
5180-5240 MHz0.03215ECC, MO
5190-5230 MHz0.04615E38, CC
5190-5230 MHz0.04615ECC
5190-5230 MHz0.04915E38, CC, MO
5190-5230 MHz0.04915ECC, MO
5190-5240 MHz0.04915ECC, MO
5260-5320 MHz0.07815E38, CC, ND
5260-5320 MHz0.07815ECC
5260-5320 MHz0.11315E38, CC, MO, ND
5260-5320 MHz0.11315ECC, MO
5270-5310 MHz0.14215E38, CC, ND
5270-5310 MHz0.14215ECC
5270-5310 MHz0.20515E38, CC, MO, ND
5270-5310 MHz0.20515ECC, MO
5500-5700 MHz0.13815E38, CC, MO, ND
5500-5700 MHz0.13815ECC, MO
5500-5700 MHz0.10615E38, CC, ND
5500-5700 MHz0.10615ECC
5510-5670 MHz0.17315E38, CC, ND
5510-5670 MHz0.17315ECC
5510-5670 MHz0.19515E38, CC, MO, ND
5510-5670 MHz0.19515ECC, MO
5745-5825 MHz0.03115E38, CC
5745-5825 MHz0.08515E38, CC, MO
5745-5825 MHz0.32915CCC, MO
5745-5825 MHz0.1215CCC, MO
5755-5795 MHz0.01715E38, CC
5755-5795 MHz0.08715E38, CC, MO
5755-5795 MHz0.1215CCC, MO

Grants

TCB Grant - Application xTLAU5eWqct+9tZ0JXyV2g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/02/2012

Application Dated: 03/02/2012
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11agn 3x3 MIMO WLAN + BT PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  
CC MO 15E 5180.0  -  5240.0 0.032  
CC 15E 5190.0  -  5230.0 0.046  
CC MO 15E 5190.0  -  5230.0 0.049  
CC 15E 5260.0  -  5320.0 0.078  
CC MO 15E 5260.0  -  5320.0 0.113  
CC 15E 5270.0  -  5310.0 0.142  
CC MO 15E 5270.0  -  5310.0 0.205  
CC 15E 5500.0  -  5700.0 0.106  
CC MO 15E 5500.0  -  5700.0 0.138  
CC 15E 5510.0  -  5670.0 0.173  
CC MO 15E 5510.0  -  5670.0 0.195  

Class II Permissive Change. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures or as described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor-only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application xTLAU5eWqct+9tZ0JXyV2g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 03/02/2012

Application Dated: 03/02/2012
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11agn 3x3 MIMO WLAN + BT PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  
CC MO 15E 5180.0  -  5240.0 0.032  
CC 15E 5190.0  -  5230.0 0.046  
CC MO 15E 5190.0  -  5230.0 0.049  
CC 15E 5260.0  -  5320.0 0.078  
CC MO 15E 5260.0  -  5320.0 0.113  
CC 15E 5270.0  -  5310.0 0.142  
CC MO 15E 5270.0  -  5310.0 0.205  
CC 15E 5500.0  -  5700.0 0.106  
CC MO 15E 5500.0  -  5700.0 0.138  
CC 15E 5510.0  -  5670.0 0.173  
CC MO 15E 5510.0  -  5670.0 0.195  

Class II Permissive Change. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures or as described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor-only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application u4S2jegAevxA3b+FmdrJ0Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/17/2013

Application Dated: 12/21/2012
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.601  
CC MO 15C 2412.0  -  2462.0 0.404  
CC MO 15C 5745.0  -  5825.0 0.329  
CC MO 15C 5745.0  -  5825.0 0.12  

Class II Permissive Change to include specific portable Notebook configurations using reduced RF power as documented in the filing. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. For Mobile-only configurations, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is: 1.19 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application u4S2jegAevxA3b+FmdrJ0Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/17/2013

Application Dated: 12/21/2012
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.601  
CC MO 15C 2412.0  -  2462.0 0.404  
CC MO 15C 5745.0  -  5825.0 0.329  
CC MO 15C 5745.0  -  5825.0 0.12  

Class II Permissive Change to include specific portable Notebook configurations using reduced RF power as documented in the filing. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. For Mobile-only configurations, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is: 1.19 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application TynVmcdSDPS7in9a3HfpGg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/02/2012

Application Dated: 03/02/2012
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11agn 3x3 MIMO WLAN + BT PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.601  
CC MO 15C 2412.0  -  2462.0 0.404  
CC MO 15C 5745.0  -  5825.0 0.329  
CC MO 15C 5755.0  -  5795.0 0.12  
CC 15C 2402.0  -  2480.0 0.00087  

Class II Permissive Change. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi -transmitter product procedures or as described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application TynVmcdSDPS7in9a3HfpGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 03/02/2012

Application Dated: 03/02/2012
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11agn 3x3 MIMO WLAN + BT PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.601  
CC MO 15C 2412.0  -  2462.0 0.404  
CC MO 15C 5745.0  -  5825.0 0.329  
CC MO 15C 5755.0  -  5795.0 0.12  
CC 15C 2402.0  -  2480.0 0.00087  

Class II Permissive Change. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi -transmitter product procedures or as described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application TnEZtEPw59I7o+0ORiz8fQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/17/2013

Application Dated: 12/21/2012
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  
CC MO 15E 5180.0  -  5240.0 0.032  
CC 15E 5190.0  -  5230.0 0.046  
CC MO 15E 5190.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.078  
CC MO 15E 5260.0  -  5320.0 0.113  
CC 15E 5270.0  -  5310.0 0.142  
CC MO 15E 5270.0  -  5310.0 0.205  
CC 15E 5500.0  -  5700.0 0.106  
CC MO 15E 5500.0  -  5700.0 0.138  
CC 15E 5510.0  -  5670.0 0.173  
CC MO 15E 5510.0  -  5670.0 0.195  

Class II Permissive Change to include specific portable Notebook configurations using reduced RF power as documented in the filing. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. For Mobile-only configurations, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is: 1.11 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application TnEZtEPw59I7o+0ORiz8fQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/17/2013

Application Dated: 12/21/2012
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  
CC MO 15E 5180.0  -  5240.0 0.032  
CC 15E 5190.0  -  5230.0 0.046  
CC MO 15E 5190.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.078  
CC MO 15E 5260.0  -  5320.0 0.113  
CC 15E 5270.0  -  5310.0 0.142  
CC MO 15E 5270.0  -  5310.0 0.205  
CC 15E 5500.0  -  5700.0 0.106  
CC MO 15E 5500.0  -  5700.0 0.138  
CC 15E 5510.0  -  5670.0 0.173  
CC MO 15E 5510.0  -  5670.0 0.195  

Class II Permissive Change to include specific portable Notebook configurations using reduced RF power as documented in the filing. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. For Mobile-only configurations, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is: 1.11 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application QXJa6KV+mHIomDx2DR4XLg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/22/2011

Application Dated: 01/22/2011
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  
CC MO 15E 5180.0  -  5240.0 0.032  
CC 15E 5190.0  -  5230.0 0.046  
CC MO 15E 5190.0  -  5230.0 0.049  
CC 15E 5260.0  -  5320.0 0.078  
CC MO 15E 5260.0  -  5320.0 0.113  
CC 15E 5270.0  -  5310.0 0.142  
CC MO 15E 5270.0  -  5310.0 0.205  
CC 15E 5500.0  -  5700.0 0.106  
CC MO 15E 5500.0  -  5700.0 0.138  
CC 15E 5510.0  -  5670.0 0.173  
CC MO 15E 5510.0  -  5670.0 0.195  

Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures or as described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor-only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application QXJa6KV+mHIomDx2DR4XLg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/22/2011

Application Dated: 01/22/2011
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  
CC MO 15E 5180.0  -  5240.0 0.032  
CC 15E 5190.0  -  5230.0 0.046  
CC MO 15E 5190.0  -  5230.0 0.049  
CC 15E 5260.0  -  5320.0 0.078  
CC MO 15E 5260.0  -  5320.0 0.113  
CC 15E 5270.0  -  5310.0 0.142  
CC MO 15E 5270.0  -  5310.0 0.205  
CC 15E 5500.0  -  5700.0 0.106  
CC MO 15E 5500.0  -  5700.0 0.138  
CC 15E 5510.0  -  5670.0 0.173  
CC MO 15E 5510.0  -  5670.0 0.195  

Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures or as described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device is restricted to indoor-only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lbLRs8OvBUn8jpH7UV+HUQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/19/2016

Application Dated: 02/19/2016
Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11agn WLAN + Bluetooth PCIE Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.043  
38 CC MO 15E 5180.0  -  5240.0 0.032  
38 CC 15E 5190.0  -  5230.0 0.046  
38 CC MO 15E 5190.0  -  5230.0 0.049  
38 CC ND 15E 5260.0  -  5320.0 0.078  
38 CC MO ND 15E 5260.0  -  5320.0 0.113  
38 CC ND 15E 5270.0  -  5310.0 0.142  
38 CC MO ND 15E 5270.0  -  5310.0 0.205  
38 CC ND 15E 5500.0  -  5700.0 0.106  
38 CC MO ND 15E 5500.0  -  5700.0 0.138  
38 CC ND 15E 5510.0  -  5670.0 0.173  
38 CC MO ND 15E 5510.0  -  5670.0 0.195  
38 CC 15E 5745.0  -  5825.0 0.031  
38 CC MO 15E 5745.0  -  5825.0 0.085  
38 CC 15E 5755.0  -  5795.0 0.017  
38 CC MO 15E 5755.0  -  5795.0 0.087  

Class II permissive change to show compliance with new UNII rules for the host model A1278 granted in 01/17/2013 . Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. For Mobileonly configurations, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators must be provided with antenna installation instructions. OEM integrators and End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is: 1.11 W/kg.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application lbLRs8OvBUn8jpH7UV+HUQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
270 Innovation Drive
San Jose, CA 95134
United States
  Date of Grant: 02/19/2016

Application Dated: 02/19/2016
 
Attention: Anne Liang , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11agn WLAN + Bluetooth PCIE Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.043  
38 CC MO 15E 5180.0  -  5240.0 0.032  
38 CC 15E 5190.0  -  5230.0 0.046  
38 CC MO 15E 5190.0  -  5230.0 0.049  
38 CC ND 15E 5260.0  -  5320.0 0.078  
38 CC MO ND 15E 5260.0  -  5320.0 0.113  
38 CC ND 15E 5270.0  -  5310.0 0.142  
38 CC MO ND 15E 5270.0  -  5310.0 0.205  
38 CC ND 15E 5500.0  -  5700.0 0.106  
38 CC MO ND 15E 5500.0  -  5700.0 0.138  
38 CC ND 15E 5510.0  -  5670.0 0.173  
38 CC MO ND 15E 5510.0  -  5670.0 0.195  
38 CC 15E 5745.0  -  5825.0 0.031  
38 CC MO 15E 5745.0  -  5825.0 0.085  
38 CC 15E 5755.0  -  5795.0 0.017  
38 CC MO 15E 5755.0  -  5795.0 0.087  

Class II permissive change to show compliance with new UNII rules for the host model A1278 granted in 01/17/2013 . Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. For Mobileonly configurations, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators must be provided with antenna installation instructions. OEM integrators and End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is: 1.11 W/kg.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application gRN/mm9IAHLp2NqHe1fZRw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/22/2011

Application Dated: 01/22/2011
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.601  
CC MO 15C 2412.0  -  2462.0 0.404  
CC MO 15C 5745.0  -  5825.0 0.329  
CC MO 15C 5755.0  -  5795.0 0.12  

Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi -transmitter product procedures or as described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application gRN/mm9IAHLp2NqHe1fZRw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/22/2011

Application Dated: 01/22/2011
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Digital Transmission System
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.601  
CC MO 15C 2412.0  -  2462.0 0.404  
CC MO 15C 5745.0  -  5825.0 0.329  
CC MO 15C 5755.0  -  5795.0 0.12  

Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is a 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi -transmitter product procedures or as described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application GOn2+p9sF0vqlIS/dd3DjA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/22/2011

Application Dated: 01/22/2011
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00087  

Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and endusers must be provided with specific operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application GOn2+p9sF0vqlIS/dd3DjA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/22/2011

Application Dated: 01/22/2011
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00087  

Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and endusers must be provided with specific operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Bh0/ioMBWaKjUTJsggGvxQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/02/2012

Application Dated: 03/02/2012
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11agn 3x3 MIMO WLAN + BT PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0011  

Class II Permissive Change. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Bh0/ioMBWaKjUTJsggGvxQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 03/02/2012

Application Dated: 03/02/2012
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11agn 3x3 MIMO WLAN + BT PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0011  

Class II Permissive Change. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 89mrELs4/74nEhG2h9fa/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/22/2011

Application Dated: 01/22/2011
Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 89mrELs4/74nEhG2h9fa/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broadcom Corporation
190 Mathilda Place
Sunnyvale, CA 94086
United States
  Date of Grant: 01/22/2011

Application Dated: 01/22/2011
 
Attention: Daniel Lawless , Director of Engineering, System Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QDS-BRCM1055
Name of Grantee:  Broadcom Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11agn WLAN + Bluetooth PCI-E Minicard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: