FCC ID QDS-BRCM1062
802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card
by Broadcom Corporation
Grantee Code: QDS Product Code: BRCM1062
Latest application date: 2012-10-23
FCC ID Device Details
| FCC ID | QDS-BRCM1062 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QDS |
| Product Code | BRCM1062 |
| Applicant Business | Broadcom Corporation 🇺🇸 |
| Related Domains |  broadcom.com |
| Equipment Class | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-10-23 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-10-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-10-23 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-06-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-06-11 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-06-11 |
| 5180-5240 MHz | Original Equipment | 2012-02-07 |
| 2402-2480 MHz | Original Equipment | 2012-02-07 |
| 2402-2480 MHz | Original Equipment | 2012-02-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| installation guide | Users Manual | 2013-04-21 | PDF 388.7 KB |
| Revised Module installation instruction | Users Manual | 2012-11-27 | PDF 395.2 KB |
| Revised module installation instruction | Users Manual | 2012-11-27 | PDF 395.2 KB |
| Users Manual again | Users Manual | 2012-11-27 | PDF 1.4 MB |
| user manual | Users Manual | 2012-11-27 | PDF 2.4 MB |
| Module installation instruction | Users Manual | 2012-08-04 | PDF 390.7 KB |
| User Manual | Users Manual | 2012-08-04 | PDF 682.9 KB |
| Photos Int | Internal Photos | 2012-08-04 | PDF 174.2 KB |
| Photos Internal | Internal Photos | 2012-08-04 | PDF 174.2 KB |
| external photops | External Photos | 2013-04-21 | PDF 1.9 MB |
| external photos | External Photos | 2013-04-21 | PDF 1.9 MB |
| Photos Ext | External Photos | 2012-08-04 | PDF 263.1 KB |
| label | ID Label/Location Info | 2012-06-11 | PDF 117.6 KB |
| label and location | ID Label/Location Info | 2012-06-11 | PDF 117.6 KB |
| Label | ID Label/Location Info | 2012-02-07 | PDF 40.3 KB |
| SAR report photos only | Test Setup Photos | 2013-04-21 | PDF 217.6 KB |
| UNII WLAN report photos only | Test Setup Photos | 2013-04-21 | PDF 231.1 KB |
| WLAN report photos only | Test Setup Photos | 2013-04-21 | PDF 231.2 KB |
| DTS setup photos | Test Setup Photos | 2012-11-27 | PDF 307.8 KB |
| Revised SAR Test Setup Photos B2 | Test Setup Photos | 2012-11-27 | PDF 310 KB |
| Revised SAR test setup photo B2 | Test Setup Photos | 2012-11-27 | PDF 310 KB |
| UNII setup photos | Test Setup Photos | 2012-11-27 | PDF 294.5 KB |
| test setup | Test Setup Photos | 2012-11-27 | PDF 455.9 KB |
| Photos Test Setup | Test Setup Photos | 2012-08-04 | PDF 165.3 KB |
| Photos Test Setup | Test Setup Photos | 2012-08-04 | PDF 188.8 KB |
| Photos Test Setup BT BLE | Test Setup Photos | 2012-08-04 | PDF 190.1 KB |
| Photos Test Setup WLAN | Test Setup Photos | 2012-08-04 | PDF 278.7 KB |
| Photos Test Setup WLAN | Test Setup Photos | 2012-08-04 | PDF 394.8 KB |
| DTS WLAN report no photos | Test Report | 2012-10-23 | PDF 737.2 KB |
| UNII WLAN report no photos | Test Report | 2012-10-23 | PDF 723.3 KB |
| BT test report no photos | Test Report | 2012-06-11 | PDF 1.2 MB |
| DSS Test Report again | Test Report | 2012-06-11 | PDF 790 KB |
| DTS RF Report | Test Report | 2012-06-11 | PDF 1.7 MB |
| Revised SAR test report B2 | RF Exposure Info | 2012-06-11 | PDF 5.5 MB |
| UNII Test Report | Test Report | 2012-06-11 | PDF 2.1 MB |
| Revised DTS Test Report | Test Report | 2012-02-07 | PDF 3.9 MB |
| Test Report | Test Report | 2012-02-07 | PDF 235.2 KB |
| Test Report | Test Report | 2012-02-07 | PDF 930.9 KB |
| Test Report Pages 1-220 | Test Report | 2012-02-07 | PDF 1.8 MB |
| Test Report Pages 221-843 | Test Report | 2012-02-07 | PDF 5.6 MB |
| Test report BTBLE | Test Report | 2012-02-07 | PDF 506.3 KB |
| attestation on power table | Attestation Statements | 2012-10-23 | PDF 28.1 KB |
| Revised attestation letter on power table | Attestation Statements | 2012-06-11 | PDF 27.9 KB |
| Revised attestation statement on Power Table | Attestation Statements | 2012-06-11 | PDF 27.9 KB |
| Revised atttestation statement on power table | Attestation Statements | 2012-06-11 | PDF 27.9 KB |
| authorization letter | Cover Letter(s) | 2012-10-23 | PDF 62.6 KB |
| class II change letter | Cover Letter(s) | 2012-10-23 | PDF 22.5 KB |
| class II permissive change letter | Cover Letter(s) | 2012-10-23 | PDF 22.5 KB |
| confidentiality letter | Cover Letter(s) | 2012-10-23 | PDF 27.4 KB |
| confidentiality request | Cover Letter(s) | 2012-10-23 | PDF 27.4 KB |
| confientiality letter | Cover Letter(s) | 2012-10-23 | PDF 27.4 KB |
| Authorization letter | Cover Letter(s) | 2012-06-11 | PDF 787.9 KB |
| Revised C2PC cover letter | Cover Letter(s) | 2012-06-11 | PDF 23.8 KB |
| Revised C2PC letter | Cover Letter(s) | 2012-06-11 | PDF 23.8 KB |
| Sign authorizatio letter | Cover Letter(s) | 2012-06-11 | PDF 36.7 KB |
| Sign authorization letter | Cover Letter(s) | 2012-06-11 | PDF 36.7 KB |
| authorization letter | Cover Letter(s) | 2012-06-11 | PDF 787.9 KB |
| confidentiality letter | Cover Letter(s) | 2012-06-11 | PDF 27.4 KB |
| signature authorization letter | Cover Letter(s) | 2012-06-11 | PDF 36.7 KB |
| Ad Hoc Passive Scanning Ltr | Cover Letter(s) | 2012-02-07 | PDF 26 KB |
| Agent Auth Ltr | Cover Letter(s) | 2012-02-07 | PDF 95.9 KB |
| Auth Ltr | Cover Letter(s) | 2012-02-07 | PDF 115.5 KB |
| Conf Ltr | Cover Letter(s) | 2012-02-07 | PDF 36.6 KB |
| Confidential Ltr | Cover Letter(s) | 2012-02-07 | PDF 36.6 KB |
| Modular Ltr | Cover Letter(s) | 2012-02-07 | PDF 26.3 KB |
| Authorization | Cover Letter(s) | PDF 62.6 KB | |
| C2PC Cover Letter | Cover Letter(s) | PDF 22.5 KB | |
| Confidentiality Request | Cover Letter(s) | PDF 27.4 KB | |
| Cal certificate for e field probe | RF Exposure Info | 2012-10-23 | PDF 1.2 MB |
| SAR report no photos | RF Exposure Info | 2012-10-23 | PDF 2.7 MB |
| SAR test plots 5 G Part I | RF Exposure Info | 2012-10-23 | PDF 3.9 MB |
| SAR test plots 5G part I | RF Exposure Info | 2012-10-23 | PDF 3.9 MB |
| SAR test plots 5G part II | RF Exposure Info | 2012-10-23 | PDF 4.4 MB |
| SAR test plots for WiFi 2.4GHZ band w 11G | RF Exposure Info | 2012-10-23 | PDF 2.2 MB |
| SAR test plots for WiFi 2.4GHz band | RF Exposure Info | 2012-10-23 | PDF 1.6 MB |
| SAR test plots wifi 2.4Ghz w 11g mode | RF Exposure Info | 2012-10-23 | PDF 2.2 MB |
| SAR test plots wifi 2.4ghz | RF Exposure Info | 2012-10-23 | PDF 1.6 MB |
| System Performance Check Plots | RF Exposure Info | 2012-10-23 | PDF 503.7 KB |
| System Performance check plots | RF Exposure Info | 2012-10-23 | PDF 503.7 KB |
| cal certificate 5G | RF Exposure Info | 2012-10-23 | PDF 1.1 MB |
| cal certificate D2450V2 | RF Exposure Info | 2012-10-23 | PDF 901.6 KB |
| cal certificate e field probe | RF Exposure Info | 2012-10-23 | PDF 1.2 MB |
| Preliminary SAR evaluation on two antenna vendors | RF Exposure Info | 2012-06-11 | PDF 49.9 KB |
| Revised 5GHz Plots | RF Exposure Info | 2012-06-11 | PDF 5.5 MB |
| Revised 5GHz SAR plots | RF Exposure Info | 2012-06-11 | PDF 5.5 MB |
| Revised SAR system check | RF Exposure Info | 2012-06-11 | PDF 999.3 KB |
| Revised SAR system performance check | RF Exposure Info | 2012-06-11 | PDF 999.3 KB |
| Revised SN 1075 calibratoin certificate | RF Exposure Info | 2012-06-11 | PDF 1.5 MB |
| SAR calibration certification 1075 | RF Exposure Info | 2012-06-11 | PDF 1.5 MB |
| SAR test plots | RF Exposure Info | 2012-06-11 | PDF 1 MB |
| cal cert for 2450V2 | RF Exposure Info | 2012-06-11 | PDF 888.2 KB |
| cal cert for 5G | RF Exposure Info | 2012-06-11 | PDF 1.1 MB |
| cal cert for e field probe | RF Exposure Info | 2012-06-11 | PDF 1.2 MB |
| calibration certificate for 2450V2 | RF Exposure Info | 2012-06-11 | PDF 888.2 KB |
| calibration certificate for 5GV2 | RF Exposure Info | 2012-06-11 | PDF 1.1 MB |
| calibration certificate for E field probe | RF Exposure Info | 2012-06-11 | PDF 1.2 MB |
| MPE Eval | RF Exposure Info | 2012-02-07 | PDF 50.3 KB |
| Revised MPE Calculation | RF Exposure Info | 2012-02-07 | PDF 47 KB |
Application Information
| Application ID | stDhw8t1KfgQEGBypEOm5A== |
|---|---|
| Final Action Date | 2012-10-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007091952 |
| Model | -BRCM1062 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Responsible Party | Daniel Lawless, Director of Engineering, System Operations, ComplianceEngineering-list-CA-list@broadcom.com , 408-543-3300 |
| Test Firm | Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com  , 510-771-1122 |
| TCB Email | LST.FRE.certnotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/21/2013 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1425 with higher gain antenna. Power listed is the maximum combined peak conducted output power. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| stDhw8t1KfgQEGBypEOm5A== | 2012-10-23 | Class II permissive change or modification of presently authorized equipment |
| UX6BpFzfB3xI+HbK6HsD4g== | 2012-10-23 | Class II permissive change or modification of presently authorized equipment |
| 1xlorcw0oww3Cbk8nUvAUQ== | 2012-10-23 | Class II permissive change or modification of presently authorized equipment |
| lV0hp94B1rji3+cQuOK/Jg== | 2012-09-12 | Class II permissive change or modification of presently authorized equipment |
| bC/v8Vc5NnStEoNnh/BvnQ== | 2012-09-12 | Class II permissive change or modification of presently authorized equipment |
| XX2Wk1uuFpIEMu0wo4dtwA== | 2012-09-12 | Class II permissive change or modification of presently authorized equipment |
| lL98Dih+rC/bUCqhHrIGvQ== | 2012-06-11 | Class II permissive change or modification of presently authorized equipment |
| FO11XDHc6teE46kLqXOLxQ== | 2012-06-11 | Class II permissive change or modification of presently authorized equipment |
| F3t4Eifz5JufQi8/kNWYeA== | 2012-06-11 | Class II permissive change or modification of presently authorized equipment |
| rXApekOjmt0OmeM8gwZa/Q== | 2012-02-07 | Original Equipment |
| o3bPYjh10V1AkIT4cgPZkg== | 2012-02-07 | Original Equipment |
| T6S/jy/meTcYaIW3Fe+wZQ== | 2012-02-07 | Original Equipment |
| G0aNBbeKCrKvQGwgPqj/vQ== | 2012-02-07 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0061500 | 15C | CC |
| 2402-2480 MHz | 0.005 | 15C | CC, MO |
| 2412-2462 MHz | 0.238 | 15C | CC, MO |
| 2412-2462 MHz | 0.247 | 15C | CC, MO |
| 5180-5240 MHz | 0.03184 | 15E | CC, MO |
| 5190-5230 MHz | 0.04498 | 15E | CC, MO |
| 5260-5320 MHz | 0.09016 | 15E | CC, MO |
| 5260-5320 MHz | 0.09016 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.1556 | 15E | CC, MO |
| 5260-5320 MHz | 0.1556 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.206 | 15E | CC, MO |
| 5270-5310 MHz | 0.206 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.09247 | 15E | CC, MO |
| 5500-5700 MHz | 0.09247 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.155 | 15E | CC, MO |
| 5500-5700 MHz | 0.155 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.224 | 15E | CC, MO |
| 5510-5670 MHz | 0.224 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.283 | 15C | CC, MO |
| 5745-5825 MHz | 0.238 | 15C | CC, MO |
| 5755-5795 MHz | 0.249 | 15E | CC, MO |
| 5755-5795 MHz | 0.249 | 15C | CC, MO |
Grants
TCB Grant - Application XX2Wk1uuFpIEMu0wo4dtwA==
This application does not exist.
EAS Grant - Application XX2Wk1uuFpIEMu0wo4dtwA==
This application currently is not in final status.
TCB Grant - Application UX6BpFzfB3xI+HbK6HsD4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/23/2012 Application Dated: 10/23/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.03184 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04498 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.09016 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1556 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.206 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.09247 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.155 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.224 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1425, with higher gain antenna. Power listed is the maximum combined peak conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. For Mobile RF Exposure uses: Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is 1.19 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application UX6BpFzfB3xI+HbK6HsD4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 10/23/2012 Application Dated: 10/23/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.03184 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04498 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.09016 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1556 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.206 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.09247 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.155 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.224 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1425, with higher gain antenna. Power listed is the maximum combined peak conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. For Mobile RF Exposure uses: Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is 1.19 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 02/07/2012 Application Dated: 02/07/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00615 |
| Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application T6S/jy/meTcYaIW3Fe+wZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 02/07/2012 Application Dated: 02/07/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00615 |
| Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/23/2012 Application Dated: 10/23/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00615 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1425 with higher gain antenna. Power listed is the maximum combined peak conducted output power. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application stDhw8t1KfgQEGBypEOm5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 10/23/2012 Application Dated: 10/23/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00615 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1425 with higher gain antenna. Power listed is the maximum combined peak conducted output power. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 02/07/2012 Application Dated: 02/07/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5755.0 - 5795.0 | 0.249 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.03184 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04498 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.09016 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1556 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.206 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.09247 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.155 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.224 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rXApekOjmt0OmeM8gwZa/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 02/07/2012 Application Dated: 02/07/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5755.0 - 5795.0 | 0.249 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.03184 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04498 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.09016 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1556 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.206 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.09247 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.155 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.224 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 02/07/2012 Application Dated: 02/07/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application o3bPYjh10V1AkIT4cgPZkg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 02/07/2012 Application Dated: 02/07/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/11/2012 Application Dated: 05/31/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.238 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.247 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.283 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.249 | ||
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1398. Power listed is the maximum combined peak conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. For Mobile RF Exposure uses: Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures Compliance of this device in all final product configurations is the responsibility of the Grantee.. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is 1.15 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application lL98Dih+rC/bUCqhHrIGvQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 06/11/2012 Application Dated: 05/31/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.238 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.247 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.283 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.249 | ||
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1398. Power listed is the maximum combined peak conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. For Mobile RF Exposure uses: Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures Compliance of this device in all final product configurations is the responsibility of the Grantee.. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is 1.15 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 02/07/2012 Application Dated: 02/07/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.238 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.247 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.283 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.249 | ||
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application G0aNBbeKCrKvQGwgPqj/vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 02/07/2012 Application Dated: 02/07/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.238 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.247 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.283 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.249 | ||
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/11/2012 Application Dated: 05/31/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00615 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1398. Power listed is the maximum combined peak conducted output power. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application FO11XDHc6teE46kLqXOLxQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 06/11/2012 Application Dated: 05/31/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00615 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1398. Power listed is the maximum combined peak conducted output power. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/11/2012 Application Dated: 05/31/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.03184 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04498 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.09016 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1556 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.206 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.09247 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.155 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.224 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1398. Power listed is the maximum combined peak conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. For Mobile RF Exposure uses: Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is 1.18 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application F3t4Eifz5JufQi8/kNWYeA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 06/11/2012 Application Dated: 05/31/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.03184 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.04498 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.09016 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1556 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.206 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.09247 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.155 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.224 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1398. Power listed is the maximum combined peak conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. For Mobile RF Exposure uses: Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is 1.18 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/23/2012 Application Dated: 10/23/2012 |
| Broadcom Corporation |
| 190 Mathilda Place |
| Sunnyvale, CA 94086 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.238 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.247 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.283 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.249 | ||
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1425 with higher gain antenna. Power listed is the maximum combined peak conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. For Mobile RF Exposure uses: Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures Compliance of this device in all final product configurations is the responsibility of the Grantee.. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is 1.19 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1xlorcw0oww3Cbk8nUvAUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Broadcom Corporation 190 Mathilda Place Sunnyvale, CA 94086 United States |
Date of Grant: 10/23/2012 Application Dated: 10/23/2012 |
| Attention: Daniel Lawless , Director of Engineering, System Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDS-BRCM1062 |
| Name of Grantee: | Broadcom Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN + Bluetooth PCI-E Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.238 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.247 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.283 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.249 | ||
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change to add portable laptop host / MacBook Pro, Model A1425 with higher gain antenna. Power listed is the maximum combined peak conducted output power. Client device per section 15.202 definition. Device is 3x3 Spatial Multiplexing MIMO Module. For Mobile RF Exposure uses: Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures Compliance of this device in all final product configurations is the responsibility of the Grantee.. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is 1.19 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |