FCC ID QDX31511
Wireless module
by LeapFrog Enterprises, Inc.
Grantee Code: QDX Product Code: 31511
Latest application date: 2014-07-17
FCC ID Device Details
| FCC ID | QDX31511 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QDX |
| Product Code | 31511 |
| Applicant Business | LeapFrog Enterprises, Inc. 🇺🇸 |
| Related Domains |  leapfrog.com.hk |
| Equipment Class | Wireless module |
| Test Firm | Sporton International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2014-07-17 |
| 2402-2480 MHz | Original Equipment | 2014-07-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2015-01-12 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2015-01-12 | PDF 163.8 KB |
| External Photos | External Photos | 2015-01-12 | PDF 109 KB |
| Label Location | ID Label/Location Info | 2014-07-17 | PDF 88.3 KB |
| Label Sample | ID Label/Location Info | 2014-07-17 | PDF 34.1 KB |
| Test Setup Photos | Test Setup Photos | 2015-01-12 | PDF 900.2 KB |
| Test Setup Photos | Test Setup Photos | 2015-01-12 | PDF 900.1 KB |
| Test Report | Test Report | 2014-07-17 | PDF 1.3 MB |
| Test Report | Test Report | 2014-07-17 | PDF 2.4 MB |
| Test Report BTLE | Test Report | 2014-07-17 | PDF 1.2 MB |
| Confidentiality Letter | Cover Letter(s) | 2014-07-17 | PDF 91.1 KB |
| Modular Approval Letter | Cover Letter(s) | 2014-07-17 | PDF 13.8 KB |
| POA | Cover Letter(s) | 2014-07-17 | PDF 95.6 KB |
| RF Exposure | RF Exposure Info | 2014-07-17 | PDF 127.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 93.8 KB | |
| Schematics Metadata only | Schematics | PDF 58.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 2.1 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 39.3 KB | |
| Tune Up Info Metadata only | Parts List/Tune Up Info | PDF 169.2 KB |
Application Information
| Application ID | hctKCMGtRcORCujKU5+wkw== |
|---|---|
| Final Action Date | 2014-07-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0007110372 |
| Model | 31511 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless module |
| Responsible Party | Henry Lau, Sr. QA Engineer, hlau@leapfrog.com.hk , 852-2317-2903 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/12/2015 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power output is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hctKCMGtRcORCujKU5+wkw== | 2014-07-17 | Original Equipment |
| etrZ5tltc4BJpg8EC7GlCg== | 2014-07-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application hctKCMGtRcORCujKU5+wkw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/17/2014 Application Dated: 07/16/2014 |
| LeapFrog Enterprises, Inc. |
| 6401 Hollis Street |
| Suite 150 |
| Emeryville, CA 94608-1070 |
| Attention: Henry Lau , Sr. QA Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDX31511 |
| Name of Grantee: | LeapFrog Enterprises, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0176 |
| Single Modular Approval. Power output is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application hctKCMGtRcORCujKU5+wkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LeapFrog Enterprises, Inc. 6401 Hollis Street Suite 150 Emeryville, CA 94608-1070 United States |
Date of Grant: 07/17/2014 Application Dated: 07/16/2014 |
| Attention: Henry Lau , Sr. QA Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDX31511 |
| Name of Grantee: | LeapFrog Enterprises, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0176 |
| Single Modular Approval. Power output is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/17/2014 Application Dated: 07/16/2014 |
| LeapFrog Enterprises, Inc. |
| 6401 Hollis Street |
| Suite 150 |
| Emeryville, CA 94608-1070 |
| Attention: Henry Lau , Sr. QA Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDX31511 |
| Name of Grantee: | LeapFrog Enterprises, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.008 | |||
| 15C | 2412.0 - 2462.0 | 0.0957 | |||
| 15C | 2422.0 - 2452.0 | 0.0565 |
| Single Modular Approval. Power output is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This Device has a 20 and 40 MHz bandwidth mode. |
EAS Grant - Application etrZ5tltc4BJpg8EC7GlCg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LeapFrog Enterprises, Inc. 6401 Hollis Street Suite 150 Emeryville, CA 94608-1070 United States |
Date of Grant: 07/17/2014 Application Dated: 07/16/2014 |
| Attention: Henry Lau , Sr. QA Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QDX31511 |
| Name of Grantee: | LeapFrog Enterprises, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.008 | |||
| 15C | 2412.0 - 2462.0 | 0.0957 | |||
| 15C | 2422.0 - 2452.0 | 0.0565 |
| Single Modular Approval. Power output is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This Device has a 20 and 40 MHz bandwidth mode. |
| Mail To: |