1. FCC ID
  2. QFT
  3. QFTA1102

FCC ID QFTA1102

Bi-direction 11 GHz Microwave Repeater

by Peninsula Engineering Solutions, inc.

Grantee Code: QFT   Product Code: A1102
Latest application date: 2017-04-07

FCC ID Device Details

FCC IDQFTA1102
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQFT
Product CodeA1102
Applicant BusinessPeninsula Engineering Solutions, inc. 🇺🇸
Related Domains peninsulaengineering.com
Equipment ClassBi-direction 11 GHz Microwave Repeater
Test FirmITC Engineering Services, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
10700-11700 MHzOriginal Equipment2017-04-07

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-04-07PDF 1.4 MB
Internal Photos 1Internal Photos2017-10-04PDF 2.4 MB
Internal Photos 2Internal Photos2017-10-04PDF 2.8 MB
Internal Photos 3Internal Photos2017-10-04PDF 2.6 MB
Internal Photos 4Internal Photos2017-10-04PDF 2.6 MB
Internal Photos 5Internal Photos2017-10-04PDF 2.3 MB
Internal Photos 6Internal Photos2017-10-04PDF 2.4 MB
Internal Photos Alarm PCB BottomInternal Photos2017-10-04PDF 328.9 KB
Internal Photos Alarm PCB TopInternal Photos2017-10-04PDF 502.9 KB
Internal Photos Display PCB BottomInternal Photos2017-10-04PDF 490.1 KB
Internal Photos Display PCB TopInternal Photos2017-10-04PDF 401.3 KB
External Photos 1External Photos2017-10-04PDF 168.3 KB
External Photos 2External Photos2017-10-04PDF 205.8 KB
External Photos 3External Photos2017-10-04PDF 190.9 KB
External Photos 4External Photos2017-10-04PDF 206 KB
External Photos 5External Photos2017-10-04PDF 227 KB
External Photos 6External Photos2017-10-04PDF 906 KB
External Photos 7External Photos2017-10-04PDF 390.6 KB
LabelID Label/Location Info2017-04-07PDF 27.9 KB
Label Location 1ID Label/Location Info2017-04-07PDF 324.3 KB
Label Location 2ID Label/Location Info2017-04-07PDF 390.6 KB
Test Setup Photos 1Test Setup Photos2017-10-04PDF 666.4 KB
Test Setup Photos 2Test Setup Photos2017-10-04PDF 654.2 KB
Test Setup Photos 3Test Setup Photos2017-10-04PDF 571.2 KB
Test Setup Photos 4Test Setup Photos2017-10-04PDF 632.7 KB
Test Setup Photos 5Test Setup Photos2017-10-04PDF 644.6 KB
Test Setup Photos 6Test Setup Photos2017-10-04PDF 809.2 KB
Test Setup Photos 7Test Setup Photos2017-10-04PDF 652.5 KB
Test ReportTest Report2017-04-07PDF 1.9 MB
Authorization LetterCover Letter(s)2017-04-07PDF 172.9 KB
Confidentilaity LetterCover Letter(s)2017-04-07PDF 182 KB
Part ListParts List/Tune Up Info2017-04-07PDF 67.1 KB
RF ExposureRF Exposure Info2017-04-07PDF 330 KB
Tune Up ProcedureParts List/Tune Up Info2017-04-07PDF 1.1 MB
Block Diagram Metadata onlyBlock DiagramPDF 156.1 KB
Schematics - PCB Layout Metadata onlySchematicsPDF 302.6 KB
Schematics 1 Metadata onlySchematicsPDF 49.8 KB
Schematics 2 Metadata onlySchematicsPDF 54.2 KB
Schematics 3 Metadata onlySchematicsPDF 48.2 KB
Schematics 4 Metadata onlySchematicsPDF 51.8 KB
Schematics 5 Metadata onlySchematicsPDF 134.3 KB
Schematics 6 Metadata onlySchematicsPDF 139.2 KB
Schematics 7 Metadata onlySchematicsPDF 33.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.4 MB

Application Information

Application IDgZ5UhpGIDVLwLRmKXKWe2w==
Final Action Date2017-04-07
Application PurposeOriginal Equipment
Applicant FRN0007227788
ModelA1102
Frequency Range10700-11700 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionBi-direction 11 GHz Microwave Repeater
Responsible PartyFrank Martens, President, fmartens@peninsulaengineering.com , 925-837-2243
Test FirmMichael Gbadebo, ITC Engineering Services, Inc., MGbadebo@itcemc.com , 9258622944
TCB Emailtei@timcoengr.com
TCB ScopeB4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz)
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/04/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsFor professional installation only. Output power listed is maximum conducted output power. The antenna used with this device must be fixed mounted on permanent structures, and must not exceed a gain of 50 dBi, including any radiating structure. The installation site must ensure a minimum separation distance of at least 3.8-m from all persons. Installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
gZ5UhpGIDVLwLRmKXKWe2w==2017-04-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
10700-11700 MHz1.590000057.0000000000Hz40M0D7W101

Grants

TCB Grant - Application gZ5UhpGIDVLwLRmKXKWe2w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 04/07/2017

Application Dated: 04/07/2017
Peninsula Engineering Solutions, inc.
Peninsula Engineering Solutions, inc.
P.O. Box 1095,
Danville, CA 94526
 
Attention: Frank Martens , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QFTA1102
Name of Grantee:  Peninsula Engineering Solutions, inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Bi-direction 11 GHz Microwave Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
101 10700.0  -  11700.0 1.59 57.0  Hz 40M0D7W

For professional installation only. Output power listed is maximum conducted output power. The antenna used with this device must be fixed mounted on permanent structures, and must not exceed a gain of 50 dBi, including any radiating structure. The installation site must ensure a minimum separation distance of at least 3.8-m from all persons. Installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application gZ5UhpGIDVLwLRmKXKWe2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Peninsula Engineering Solutions, inc.
Peninsula Engineering Solutions, inc. P.O. Box 1095,
Danville, CA 94526
United States 		  Date of Grant: 04/07/2017

Application Dated: 04/07/2017
 
Attention: Frank Martens , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QFTA1102
Name of Grantee:  Peninsula Engineering Solutions, inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Bi-direction 11 GHz Microwave Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
101 10700.0  -  11700.0 1.59 57.0  Hz 40M0D7W

For professional installation only. Output power listed is maximum conducted output power. The antenna used with this device must be fixed mounted on permanent structures, and must not exceed a gain of 50 dBi, including any radiating structure. The installation site must ensure a minimum separation distance of at least 3.8-m from all persons. Installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: