FCC ID QHC-KVEVZE41

kV2c-AMPZE Module

by Itron

Grantee Code: QHC   Product Code: KVEVZE41
Latest application date: 2014-06-20

FCC ID Device Details

FCC IDQHC-KVEVZE41
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQHC
Product CodeKVEVZE41
Applicant BusinessItron 🇺🇸
Related Domains itron.com
Equipment ClasskV2c-AMPZE Module
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2405-2474 MHzOriginal Equipment2014-06-20
910-921.8 MHzOriginal Equipment2014-06-20

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2014-06-20PDF 183.4 KB
External PhotosExternal Photos2014-06-20PDF 12.3 KB
Label InformationID Label/Location Info2014-06-20PDF 322.7 KB
Test Setup PhotosTest Setup Photos2014-06-20PDF 1.6 MB
Test ReportTest Report2014-06-20PDF 1.1 MB
Test ReportTest Report2014-06-20PDF 761.9 KB
Agency AgreementCover Letter(s)2014-06-20PDF 19.6 KB
Confidentiality RequestCover Letter(s)2014-06-20PDF 60.5 KB
FCC Cover LetterCover Letter(s)2014-06-20PDF 12.5 KB
Modular Approval LetterCover Letter(s)2014-06-20PDF 20.7 KB
NDA LetterCover Letter(s)2014-06-20PDF 17.7 KB
RF ExposureRF Exposure Info2014-06-20PDF 60 KB
Internal Photos Metadata onlyInternal PhotosPDF 1.5 MB
Block Diagram Metadata onlyBlock DiagramPDF 85.6 KB
Schematics Metadata onlySchematicsPDF 270.3 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 464.3 KB

Application Information

Application IDF7IecFVXT63NQi+XntjkWw==
Final Action Date2014-06-20
Application PurposeOriginal Equipment
Applicant FRN0015586100
ModelKVEVZE41
Frequency Range2405-2474 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionkV2c-AMPZE Module
Responsible PartyMike Mathis, Senior Compliance Engineer, mike.mathis@itron.com , 601-362-1780
AgentSam Sam Sam, Advanced Compliance Solutions, Inc.
Test FirmRandy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048
TCB Emailjwoods@acstestlab.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. Device is limited to installation in the specific hosts as described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 27%. Device is co-located with FCC ID: N7NSL5011

Applications

Application IDDatePurpose
F7IecFVXT63NQi+XntjkWw==2014-06-20Original Equipment
3nzYEqieuCyut6Qze76ZBQ==2014-06-20Original Equipment

Equipment Authorization

FrequencyOutputRules
910-921.8 MHz0.041000015C
2405-2474 MHz0.016000015C

Grants

TCB Grant - Application F7IecFVXT63NQi+XntjkWw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 06/20/2014

Application Dated: 06/20/2014
Itron
4400 Old Canton Road
Suite 300
Jackson, MS 39211
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-KVEVZE41
Name of Grantee:  Itron
Equipment Class: Digital Transmission System
Notes: kV2c-AMPZE Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2474.0 0.016  

Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. Device is limited to installation in the specific hosts as described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 27%. Device is co-located with FCC ID: N7NSL5011

EAS Grant - Application F7IecFVXT63NQi+XntjkWw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron
4400 Old Canton Road Suite 300
Jackson, MS 39211
United States
  Date of Grant: 06/20/2014

Application Dated: 06/20/2014
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-KVEVZE41
Name of Grantee:  Itron
Equipment Class: Digital Transmission System
Notes: kV2c-AMPZE Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2474.0 0.016  

Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. Device is limited to installation in the specific hosts as described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 27%. Device is co-located with FCC ID: N7NSL5011



TCB Grant - Application 3nzYEqieuCyut6Qze76ZBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 06/20/2014

Application Dated: 06/20/2014
Itron
4400 Old Canton Road
Suite 300
Jackson, MS 39211
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-KVEVZE41
Name of Grantee:  Itron
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: kV2c-AMPZE Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 910.0  -  921.8 0.041  

Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. Device is limited to installation in the specific hosts as described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 57.2%. Device is co-located with FCC ID: N7NSL5011

EAS Grant - Application 3nzYEqieuCyut6Qze76ZBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron
4400 Old Canton Road Suite 300
Jackson, MS 39211
United States
  Date of Grant: 06/20/2014

Application Dated: 06/20/2014
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-KVEVZE41
Name of Grantee:  Itron
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: kV2c-AMPZE Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 910.0  -  921.8 0.041  

Limited Modular Approval. Power listed is conducted. This device must be professionally installed and is limited to installation for mobile and fixed applications only. Device is limited to installation in the specific hosts as described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 57.2%. Device is co-located with FCC ID: N7NSL5011



Mail To: