FCC ID QHC-OPENWAY1X

Cellular/ PCS CDMA Power Meter with Zigbee Transmitter

by Itron

Grantee Code: QHC   Product Code: OPENWAY1X
Latest application date: 2013-11-20

FCC ID Device Details

FCC IDQHC-OPENWAY1X
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQHC
Product CodeOPENWAY1X
Applicant BusinessItron 🇺🇸
Related Domains itron.com
Equipment ClassCellular/ PCS CDMA Power Meter with Zigbee Transmitter
Test FirmPCTEST Engineering Laboratory, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.7-848.31 MHzClass II permissive change or modification of presently authorized equipment2013-11-20
2405-2475 MHzOriginal Equipment2011-01-12
824.7-848.31 MHzOriginal Equipment2011-01-12

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2011-07-11PDF 187.3 KB
Internal PhotosInternal Photos2011-07-11PDF 4.8 MB
External PhotosExternal Photos2011-07-11PDF 1.3 MB
FCC ID Label and LocationID Label/Location Info2011-01-12PDF 1.8 MB
Test Setup PhotosTest Setup Photos2013-11-20PDF 517.2 KB
Test Setup PhotosTest Setup Photos2011-07-11PDF 607.2 KB
Test ReportTest Report2013-11-20PDF 629.7 KB
Test ReportTest Report2011-01-12PDF 1.7 MB
Test ReportTest Report2011-01-12PDF 1.3 MB
Attestation StatementAttestation Statements2011-01-12PDF 269.4 KB
Class II Cover LetterCover Letter(s)2013-11-20PDF 2.7 MB
Confidentiality Request LetterCover Letter(s)2011-01-12PDF 431.7 KB
MPE ReportRF Exposure Info2011-01-12PDF 195.4 KB

Application Information

Application IDKDvbCtLFzDyKj8+ae6OM9Q==
Final Action Date2013-11-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015586100
Model-OPENWAY1X
Frequency Range824.7-848.31 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionCellular/ PCS CDMA Power Meter with Zigbee Transmitter
Responsible PartyMike Mathis, Senior Compliance Engineer, mike.mathis@itron.com , 601-362-1780
Technical ContactRandy Ortanez, PCTEST Engineering Lab., Inc., tcb@pctestlab.com , 410-290-6652
Test FirmRandy Ortanez, PCTEST Engineering Laboratory, Inc., lab@pctestlab.com , 410-290-6652
TCB Emailtcb@pctestlab.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Power output listed is ERP for Part 22 and EIRP for Part 24. This device is approved as a mobile device with respect to RF exposure compliance. The antenna used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons, and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
KDvbCtLFzDyKj8+ae6OM9Q==2013-11-20Class II permissive change or modification of presently authorized equipment
qyQShueZQG40Zcuk5aK8uQ==2011-01-12Original Equipment
U4fbtNyryqekVmRMaG7Txw==2011-01-12Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.7-848.31 MHz0.0722.5ppm1M27F9W22H
1851.25-1908.75 MHz0.3662.5ppm1M27F9W24E
2405-2475 MHz0.032000015C

Grants

TCB Grant - Application U4fbtNyryqekVmRMaG7Txw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
Date of Grant: 01/12/2011

Application Dated: 01/12/2011
Itron
4400 Old Canton Road
Suite 300
Jackson, MS 39211
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-OPENWAY1X
Name of Grantee:  Itron
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS CDMA Power Meter with Zigbee Transmitter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.072 2.5  PM 1M27F9W
24E 1851.25  -  1908.75 0.366 2.5  PM 1M27F9W

Power output listed is ERP for Part 22 and EIRP for Part 24. This device is approved as a mobile device with respect to RF exposure compliance. The antenna used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons, and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application U4fbtNyryqekVmRMaG7Txw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron
4400 Old Canton Road Suite 300
Jackson, MS 39211
United States
  Date of Grant: 01/12/2011

Application Dated: 01/12/2011
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-OPENWAY1X
Name of Grantee:  Itron
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS CDMA Power Meter with Zigbee Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.072 2.5  PM 1M27F9W
24E 1851.25  -  1908.75 0.366 2.5  PM 1M27F9W

Power output listed is ERP for Part 22 and EIRP for Part 24. This device is approved as a mobile device with respect to RF exposure compliance. The antenna used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons, and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application qyQShueZQG40Zcuk5aK8uQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
Date of Grant: 01/12/2011

Application Dated: 01/12/2011
Itron
4400 Old Canton Road
Suite 300
Jackson, MS 39211
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-OPENWAY1X
Name of Grantee:  Itron
Equipment Class: Digital Transmission System
Notes: Cellular/ PCS CDMA Power Meter with Zigbee Transmitter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.032  

Output power is conducted. This device is approved for use in the transceiver described in the filing.

EAS Grant - Application qyQShueZQG40Zcuk5aK8uQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron
4400 Old Canton Road Suite 300
Jackson, MS 39211
United States
  Date of Grant: 01/12/2011

Application Dated: 01/12/2011
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-OPENWAY1X
Name of Grantee:  Itron
Equipment Class: Digital Transmission System
Notes: Cellular/ PCS CDMA Power Meter with Zigbee Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2475.0 0.032  

Output power is conducted. This device is approved for use in the transceiver described in the filing.



TCB Grant - Application KDvbCtLFzDyKj8+ae6OM9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
Date of Grant: 11/20/2013

Application Dated: 11/20/2013
Itron
4400 Old Canton Road
Suite 300
Jackson, MS 39211
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-OPENWAY1X
Name of Grantee:  Itron
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS CDMA Power Meter with Zigbee Transmitter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.072 2.5  PM 1M27F9W
24E 1851.25  -  1908.75 0.366 2.5  PM 1M27F9W

Class II Permissive Change.

Power output listed is ERP for Part 22 and EIRP for Part 24. This device is approved as a mobile device with respect to RF exposure compliance. The antenna used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons, and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


EAS Grant - Application KDvbCtLFzDyKj8+ae6OM9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Itron
4400 Old Canton Road Suite 300
Jackson, MS 39211
United States
  Date of Grant: 11/20/2013

Application Dated: 11/20/2013
 
Attention: Mike Mathis , Senior Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHC-OPENWAY1X
Name of Grantee:  Itron
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS CDMA Power Meter with Zigbee Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.072 2.5  PM 1M27F9W
24E 1851.25  -  1908.75 0.366 2.5  PM 1M27F9W

Class II Permissive Change.

Power output listed is ERP for Part 22 and EIRP for Part 24. This device is approved as a mobile device with respect to RF exposure compliance. The antenna used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons, and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: