FCC ID QHKMRU400
RFID Module
by Tagsys S.A.
Grantee Code: QHK Product Code: MRU400
Latest application date: 2013-01-03
FCC ID Device Details
| FCC ID | QHKMRU400 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QHK |
| Product Code | MRU400 |
| Applicant Business | Tagsys S.A. 🇫🇷 |
| Related Domains |  tagsysrfid.com |
| Equipment Class | RFID Module |
| Test Firm | SMEE-CE Mesures |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2013-01-03 |
| 902.75-927.25 MHz | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY5E Grant Date: 03/12/2008 | 2013-01-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2013-01-03 | PDF 244.6 KB |
| Label and Location | ID Label/Location Info | 2013-01-03 | PDF 134.9 KB |
| Cover Letter - Agent Authorization | Cover Letter(s) | 2013-01-03 | PDF 74.1 KB |
| Cover Letter - Application for Change in ID | Cover Letter(s) | 2013-01-03 | PDF 159.9 KB |
| Cover Letter - Authorization to file for Change in ID | Cover Letter(s) | 2013-01-03 | PDF 310.7 KB |
| Cover Letter - Class II Permissive Change | Cover Letter(s) | 2013-01-03 | PDF 21.8 KB |
| RF Exposure Info | RF Exposure Info | 2013-01-03 | PDF 21.2 KB |
Application Information
| Application ID | hTZOpEY7BNGOkG0965RJ3g== |
|---|---|
| Final Action Date | 2013-01-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007342991 |
| Model | MRU400 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Module |
| Responsible Party | Franck D'ANNUNZIO, Product Development Director, franck.dannunzio@tagsysrfid.com , +33 4 42 18 89 18 |
| Test Firm | Laurent CHAPUS, SMEE-CE Mesures, laurent.chapus@smee.fr  , 33476657650 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change to address collocation with FCC ID: QOQWT12 as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hTZOpEY7BNGOkG0965RJ3g== | 2013-01-03 | Class II permissive change or modification of presently authorized equipment |
| 2mHqncJ9xD3X6bO6I98rXw== | 2013-01-03 | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY5E Grant Date: 03/12/2008 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 0.6710000 | 15C |
Grants
TCB Grant - Application hTZOpEY7BNGOkG0965RJ3g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 01/03/2013 Application Dated: 01/03/2013 |
| Tagsys S.A. |
| 785 Voie Antiope |
| ZI Athélia III |
| LA CIOTAT, 13600 France |
| Attention: Franck D'ANNUNZIO , Product Development Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHKMRU400 |
| Name of Grantee: | Tagsys S.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.671 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change to address collocation with FCC ID: QOQWT12 as described in this filing. |
EAS Grant - Application hTZOpEY7BNGOkG0965RJ3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tagsys S.A. 785 Voie Antiope ZI Athélia III LA CIOTAT, 13600 France |
Date of Grant: 01/03/2013 Application Dated: 01/03/2013 |
| Attention: Franck D'ANNUNZIO , Product Development Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHKMRU400 |
| Name of Grantee: | Tagsys S.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.671 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change to address collocation with FCC ID: QOQWT12 as described in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 01/03/2013 Application Dated: 01/03/2013 |
| Tagsys S.A. |
| 785 Voie Antiope |
| ZI Athélia III |
| LA CIOTAT, 13600 France |
| Attention: Franck D'ANNUNZIO , Product Development Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHKMRU400 |
| Name of Grantee: | Tagsys S.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.671 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application 2mHqncJ9xD3X6bO6I98rXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tagsys S.A. 785 Voie Antiope ZI Athélia III LA CIOTAT, 13600 France |
Date of Grant: 01/03/2013 Application Dated: 01/03/2013 |
| Attention: Franck D'ANNUNZIO , Product Development Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHKMRU400 |
| Name of Grantee: | Tagsys S.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.671 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: |