FCC ID QHKRTILHSCORE

Hot Spot Radio Module

by Tagsys S.A.

Grantee Code: QHK   Product Code: RTILHSCORE
Latest application date: 2019-07-26

FCC ID Device Details

FCC IDQHKRTILHSCORE
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQHK
Product CodeRTILHSCORE
Applicant BusinessTagsys S.A. 🇫🇷
Related Domains tagsysrfid.com
Equipment ClassHot Spot Radio Module
Test FirmLCIE Etablissement Sud-Est

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2400.4-2472.9 MHzClass II permissive change or modification of presently authorized equipment2019-07-26
2400.4-2472.9 MHzOriginal Equipment2015-07-20

Exhibits

DocumentTypeAvailableFile
Installation manualUsers Manual2015-07-20PDF 4.1 MB
Installation noteUsers Manual2015-07-20PDF 109.2 KB
Internal PhotosInternal Photos2015-07-20PDF 752.6 KB
External PhotosExternal Photos2015-07-20PDF 752.6 KB
LabelID Label/Location Info2015-07-20PDF 56.9 KB
Test PhotosTest Setup Photos2015-07-20PDF 357.7 KB
Test Report - QHKRTILHSCORE.pdfTest Report2019-07-26PDF 1.9 MB
Test ReportTest Report2015-07-20PDF 768.2 KB
Cover-Letter-Justification-Signed-QHKRTILHSCORE.pdfCover Letter(s)2019-07-26PDF 392 KB
Agent AuthorizationCover Letter(s)2015-07-20PDF 231.2 KB
Confidentiality RequestCover Letter(s)2015-07-20PDF 423.9 KB
Modular Approval LetterCover Letter(s)2015-07-20PDF 575.1 KB
RF Exposure Information (MPE colocation) - QHKRTILHSCORE_Rev.pdfRF Exposure Info2019-07-26PDF 496.8 KB
RF ExposureRF Exposure Info2015-07-20PDF 55.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 73.8 KB
Schematics Metadata onlySchematicsPDF 234.8 KB
Operation Description Metadata onlyOperational DescriptionPDF 100.7 KB
TCB questions and answers Metadata onlyOperational DescriptionPDF 22.3 KB

Application Information

Application IDzU6dvShFjCLqhDG/GfasfA==
Final Action Date2019-07-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007342991
ModelRTILHSCORE
Frequency Range2400.4-2472.9 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionHot Spot Radio Module
Responsible PartyFranck D'ANNUNZIO, Product Development Director, franck.dannunzio@tagsysrfid.com , +33 4 42 18 89 18
Test FirmAnthony Merlin, LCIE Etablissement Sud-Est, anthony.merlin@bureauveritas.com , 00-33-4-76-07-36-36
TCB Emailtcb@us.bureauveritas.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to add an antenna type as described in this filing. Power Output listed is conducted. Modular Approval. This device is granted for use in Mobile configurations. Co-location with other transmitters for simultaneous transmission may be done in accordance with FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

Applications

Application IDDatePurpose
zU6dvShFjCLqhDG/GfasfA==2019-07-26Class II permissive change or modification of presently authorized equipment
xwTOMz+X+YXKmfM/YT6ECg==2015-07-20Original Equipment

Equipment Authorization

FrequencyOutputRules
2400.4-2472.9 MHz0.112000015C

Grants

TCB Grant - Application zU6dvShFjCLqhDG/GfasfA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/26/2019

Application Dated: 07/25/2019
Tagsys S.A.
286 avenue du Pastre
ZI des Paluds
AUBAGNE, 13400
France
 
Attention: Franck D'ANNUNZIO , Product Development Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHKRTILHSCORE
Name of Grantee:  Tagsys S.A.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Hot Spot Radio Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.4  -  2472.9 0.112  

Class II Permissive Change to add an antenna type as described in this filing.

Power Output listed is conducted. Modular Approval.

This device is granted for use in Mobile configurations. Co-location with other transmitters for simultaneous transmission may be done in accordance with FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.


EAS Grant - Application zU6dvShFjCLqhDG/GfasfA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Tagsys S.A.
286 avenue du Pastre ZI des Paluds
AUBAGNE, 13400
France
  Date of Grant: 07/26/2019

Application Dated: 07/25/2019
 
Attention: Franck D'ANNUNZIO , Product Development Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHKRTILHSCORE
Name of Grantee:  Tagsys S.A.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Hot Spot Radio Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.4  -  2472.9 0.112  

Class II Permissive Change to add an antenna type as described in this filing.

Power Output listed is conducted. Modular Approval.

This device is granted for use in Mobile configurations. Co-location with other transmitters for simultaneous transmission may be done in accordance with FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.



TCB Grant - Application xwTOMz+X+YXKmfM/YT6ECg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/20/2015

Application Dated: 07/20/2015
Tagsys S.A.
286 avenue du Pastre
ZI des Paluds
AUBAGNE, 13400
France
 
Attention: Franck D'ANNUNZIO , Product Development Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHKRTILHSCORE
Name of Grantee:  Tagsys S.A.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Hot Spot Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.4  -  2472.9 0.112  

Power Output listed is conducted. Modular Approval.

This device is granted for use in Mobile configurations. Co-location with other transmitters for simultaneous transmission may be done in accordance with FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.


EAS Grant - Application xwTOMz+X+YXKmfM/YT6ECg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Tagsys S.A.
286 avenue du Pastre ZI des Paluds
AUBAGNE, 13400
France
  Date of Grant: 07/20/2015

Application Dated: 07/20/2015
 
Attention: Franck D'ANNUNZIO , Product Development Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHKRTILHSCORE
Name of Grantee:  Tagsys S.A.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Hot Spot Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.4  -  2472.9 0.112  

Power Output listed is conducted. Modular Approval.

This device is granted for use in Mobile configurations. Co-location with other transmitters for simultaneous transmission may be done in accordance with FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.



Mail To: