FCC ID QHY-S1000C

CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell

by CommScope Technologies LLC

Grantee Code: QHY   Product Code: S1000C
Latest application date: 2016-10-14

FCC ID Device Details

FCC IDQHY-S1000C
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQHY
Product CodeS1000C
Applicant BusinessCommScope Technologies LLC 🇺🇸
Related Domains commscope.com
Equipment ClassCDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Test FirmEUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2016-10-14
862.9-867.9 MHzOriginal Equipment2016-10-14
5180-5240 MHzOriginal Equipment2016-10-14
869.04-889.2 MHzOriginal Equipment2016-10-14

Exhibits

DocumentTypeAvailableFile
UserGuideUsers Manual2017-04-05PDF 1.8 MB
Internal PhotosInternal Photos2017-04-05PDF 1.7 MB
External PhotosExternal Photos2017-04-05PDF 1.9 MB
Label & LocationID Label/Location Info2016-10-14PDF 264.3 KB
Test Setup PhotosTest Setup Photos2017-04-05PDF 268.1 KB
Antenna - BC0 BC10 Train7 Test ReportRF Exposure Info2016-10-14PDF 888.6 KB
Antenna - BC1 BC10 Test ReportRF Exposure Info2016-10-14PDF 995.2 KB
Test ReportTest Report2016-10-14PDF 1.4 MB
Test Report - Part 22 24Test Report2016-10-14PDF 2.3 MB
Test Report Part 27 - Part 1Test Report2016-10-14PDF 3.5 MB
Test Report Part 27 - Part 2Test Report2016-10-14PDF 4.5 MB
Test Report Part 90Test Report2016-10-14PDF 1.1 MB
Test Report Unii 1Test Report2016-10-14PDF 1.2 MB
Test Report Unii 2Test Report2016-10-14PDF 3.8 MB
Test Report Unii 3Test Report2016-10-14PDF 1.2 MB
DFS Expedited Review RequestCover Letter(s)2016-10-14PDF 241.5 KB
Request for ConfidentialityCover Letter(s)2016-10-14PDF 289.3 KB
Antenna - 150522RF Exposure Info2016-10-14PDF 1.9 MB
Antenna - BC0RF Exposure Info2016-10-14PDF 888.6 KB
Antenna - BC1 BC10 Data SheetRF Exposure Info2016-10-14PDF 138.8 KB
Antenna - Train7RF Exposure Info2016-10-14PDF 478.9 KB
Antenna - Train7 BC0 BC10 Data SheetRF Exposure Info2016-10-14PDF 478.9 KB
Antenna - W3020RF Exposure Info2016-10-14PDF 2 MB
MPERF Exposure Info2016-10-14PDF 106 KB
MPERF Exposure Info2016-10-14PDF 75.4 KB
MPE - Part 22 24RF Exposure Info2016-10-14PDF 108.1 KB
MPE - UNII 1RF Exposure Info2016-10-14PDF 75.3 KB
MPE - UNII 2RF Exposure Info2016-10-14PDF 88.3 KB
MPE - UNII 3RF Exposure Info2016-10-14PDF 75.4 KB
Block Diagram - Combo Metadata onlyBlock DiagramPDF 432.9 KB
Block Diagram - Radi Metadata onlyBlock DiagramPDF 214 KB
Block Diagram - Radio Metadata onlyBlock DiagramPDF 214 KB
Block Diagram - S1000C Metadata onlyBlock DiagramPDF 109 KB
PCB - C4500 - 710721 Metadata onlySchematicsPDF 140.7 KB
PCB - C4500 - 720721 Metadata onlySchematicsPDF 520.4 KB
PCB - S1000 - 710752 Metadata onlySchematicsPDF 135.7 KB
PCB - S1000 - 720752 Metadata onlySchematicsPDF 85.5 KB
Schematics - C4500 Metadata onlySchematicsPDF 1.6 MB
Schematics - C4500 - 760721 Metadata onlySchematicsPDF 1.6 MB
Schematics - S1000 Metadata onlySchematicsPDF 2.4 MB
Schematics - S1000 - 760752 Metadata onlySchematicsPDF 2.4 MB
Power Supply - Ding Feng - 12V 4000mA Metadata onlyOperational DescriptionPDF 1,018.3 KB
Power Supply - Ding Feng - DOE Metadata onlyOperational DescriptionPDF 223.8 KB
Power Supply - Ding Feng - NTC1501205F Metadata onlyOperational DescriptionPDF 319.3 KB
Power Supply - Ding Feng - NTC1501205F 15B Metadata onlyOperational DescriptionPDF 3.3 MB
Power Supply - Ding Feng - NofA Metadata onlyOperational DescriptionPDF 109.2 KB
Power Supply - Dynamic Necessities - DN Metadata onlyOperational DescriptionPDF 720.8 KB
Power Supply - Dynamic Necessities - DYS650 12V4A 15B Metadata onlyOperational DescriptionPDF 614.5 KB
Power Supply - Dynamic Necessities - DYS650 12V4A FCC Metadata onlyOperational DescriptionPDF 614.5 KB
Power Supply - Dynamic Necessities - DYS650 12V4A UL NOA Metadata onlyOperational DescriptionPDF 60 KB
Power Supply - Dynamic Necessities - DYS650 12V4ADOE Metadata onlyOperational DescriptionPDF 855.4 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 106.4 KB
SOFTWARE CONFIGURATION DESCRIPTION Metadata onlySDR Software/Security InfPDF 559.3 KB
Tune Up Procedure Exclusion Letter Metadata onlyParts List/Tune Up InfoPDF 238.2 KB
BOM - 800236 Metadata onlyParts List/Tune Up InfoPDF 129.1 KB

Application Information

Application IDjoql6I5fmahBki8eRKjrqA==
Final Action Date2016-10-14
Application PurposeOriginal Equipment
Applicant FRN0024704082
ModelS1000C
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionCDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Responsible PartyKevin Craig, Consulting Engineer, kevin.craig@commscope.com , 978-614-3182
Technical ContactKevin Craig, CommScope Technologies LLC, Kevin.craig@commscope.com , 978-250-2678
Test FirmGreg Kovolenko, EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC, greg.kovolenko@metlabs.com , 4108444071
TCB Emailtcbinfo@metlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/05/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidths.

Applications

Application IDDatePurpose
joql6I5fmahBki8eRKjrqA==2016-10-14Original Equipment
XMduCPwTKsK49wGpcUcNdw==2016-10-14Original Equipment
UX4gw7nJYTzxv7YLRWB1PA==2016-10-14Original Equipment
3fAddSsuXqNvd8Eom4XCZA==2016-10-14Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
862.9-867.9 MHz22.8030.73ppm5K2F3E9
869.04-889.2 MHz1.2190.038ppm245KF9W22H
1931.25-1988.75 MHz0.7520.021ppm246KF9W24E
2412-2462 MHz0.531000015CCC, MO
2506-2680 MHz0.1342.5ppm17M8W7D27
2506-2680 MHz0.1262.5ppm17M8G7D27
5180-5240 MHz0.27915E38, CC, MO
5260-5320 MHz0.24515E38, CC, MO, ND
5500-5700 MHz0.24115E38, CC, MO, ND
5745-5825 MHz0.27515E38, CC, MO

Grants

TCB Grant - Application XMduCPwTKsK49wGpcUcNdw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 10/14/2016

Application Dated: 10/07/2016
CommScope Technologies LLC
Cross Point Tower
900 Chelmsford Street
Lowell, MA 01851
 
Attention: Kevin Craig , Consulting Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHY-S1000C
Name of Grantee:  CommScope Technologies LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 862.9  -  867.9 22.803 0.73  PM 5K2F3E
27 2506.0  -  2680.0 0.134 2.5  PM 17M8W7D
27 2506.0  -  2680.0 0.126 2.5  PM 17M8G7D

Device has three transmit chains each operating on a single carrier at a time. Transmit chains do not operate at the same frequency simultaneously. Power listed is conducted for Part 27 and Power listed is ERP for Part 90. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.

EAS Grant - Application XMduCPwTKsK49wGpcUcNdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CommScope Technologies LLC
Cross Point Tower 900 Chelmsford Street
Lowell, MA 01851
United States
  Date of Grant: 10/14/2016

Application Dated: 10/07/2016
 
Attention: Kevin Craig , Consulting Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHY-S1000C
Name of Grantee:  CommScope Technologies LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 862.9  -  867.9 22.803 0.73  PM 5K2F3E
27 2506.0  -  2680.0 0.134 2.5  PM 17M8W7D
27 2506.0  -  2680.0 0.126 2.5  PM 17M8G7D

Device has three transmit chains each operating on a single carrier at a time. Transmit chains do not operate at the same frequency simultaneously. Power listed is conducted for Part 27 and Power listed is ERP for Part 90. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.



TCB Grant - Application UX4gw7nJYTzxv7YLRWB1PA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 10/14/2016

Application Dated: 10/07/2016
CommScope Technologies LLC
Cross Point Tower
900 Chelmsford Street
Lowell, MA 01851
 
Attention: Kevin Craig , Consulting Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHY-S1000C
Name of Grantee:  CommScope Technologies LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.279  
38 CC MO ND 15E 5260.0  -  5320.0 0.245  
38 CC MO ND 15E 5500.0  -  5700.0 0.241  
38 CC MO 15E 5745.0  -  5825.0 0.275  

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidths.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application UX4gw7nJYTzxv7YLRWB1PA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CommScope Technologies LLC
Cross Point Tower 900 Chelmsford Street
Lowell, MA 01851
United States
  Date of Grant: 10/14/2016

Application Dated: 10/07/2016
 
Attention: Kevin Craig , Consulting Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHY-S1000C
Name of Grantee:  CommScope Technologies LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.279  
38 CC MO ND 15E 5260.0  -  5320.0 0.245  
38 CC MO ND 15E 5500.0  -  5700.0 0.241  
38 CC MO 15E 5745.0  -  5825.0 0.275  

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application joql6I5fmahBki8eRKjrqA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 10/14/2016

Application Dated: 10/07/2016
CommScope Technologies LLC
Cross Point Tower
900 Chelmsford Street
Lowell, MA 01851
 
Attention: Kevin Craig , Consulting Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHY-S1000C
Name of Grantee:  CommScope Technologies LLC
Equipment Class: Digital Transmission System
Notes: CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.531  

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidths.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application joql6I5fmahBki8eRKjrqA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CommScope Technologies LLC
Cross Point Tower 900 Chelmsford Street
Lowell, MA 01851
United States
  Date of Grant: 10/14/2016

Application Dated: 10/07/2016
 
Attention: Kevin Craig , Consulting Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHY-S1000C
Name of Grantee:  CommScope Technologies LLC
Equipment Class: Digital Transmission System
Notes: CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.531  

Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 3fAddSsuXqNvd8Eom4XCZA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 10/14/2016

Application Dated: 10/07/2016
CommScope Technologies LLC
Cross Point Tower
900 Chelmsford Street
Lowell, MA 01851
 
Attention: Kevin Craig , Consulting Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHY-S1000C
Name of Grantee:  CommScope Technologies LLC
Equipment Class: PCS Licensed Transmitter held to ear
Notes: CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 869.04  -  889.2 1.219 0.038  PM 245KF9W
24E 1931.25  -  1988.75 0.752 0.021  PM 246KF9W

Device has three transmit chains each operating on a single carrier at a time. Transmit chains do not operate at the same frequency simultaneously. Power listed is EIRP for Part 24 and ERP for Part 22. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.

EAS Grant - Application 3fAddSsuXqNvd8Eom4XCZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CommScope Technologies LLC
Cross Point Tower 900 Chelmsford Street
Lowell, MA 01851
United States
  Date of Grant: 10/14/2016

Application Dated: 10/07/2016
 
Attention: Kevin Craig , Consulting Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QHY-S1000C
Name of Grantee:  CommScope Technologies LLC
Equipment Class: PCS Licensed Transmitter held to ear
Notes: CDMA 1X & EVDO,TD-LTE and Dual-Band Wi-Fi Small Cell
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 869.04  -  889.2 1.219 0.038  PM 245KF9W
24E 1931.25  -  1988.75 0.752 0.021  PM 246KF9W

Device has three transmit chains each operating on a single carrier at a time. Transmit chains do not operate at the same frequency simultaneously. Power listed is EIRP for Part 24 and ERP for Part 22. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.



Mail To: